MONTEREY BAY UNIFIED AIR POLLUTION CONTROL DISTRICT
RULE 205 - PROVISION OF SAMPLING AND TESTING FACILITIES
(Adopted 1-19-70; Revised 12-13-84, and 3-21-2001)
REGULATION II
PERMITS
| PART 1 | GENERAL |
| 1.1 | Purpose |
| The purpose of this Rule is to establish provisions for sampling and testing facilities. | |
| 1.2 | Applicability |
| The provisions of this Rule may apply to any person who applies for a District Permit. | |
| 1.3 | Exemptions |
| Reserved. | |
| 1.4 | Effective Dates |
| This Rule, as most recently revised, is effective on March 21, 2001. | |
| 1.5 | References |
| The requirements of this Rule arise from the provisions of California Health and Safety Code Section 40702. Referenced or related District Rules include: 101 (Definitions); 200 (Permits Required); and 201 (Sources Not Requiring Permits). | |
| PART 2 | DEFINITIONS |
| Reserved. | |
| PART 3 | REQUIREMENTS |
| 3.1 | Sampling and Testing Facilities |
| A person operating or using any article, machine, equipment, or other contrivance for which District Rules require a permit shall provide and maintain such sampling and testing facilities as specified in their Authority to Construct or Permit to Operate. |
* * * * *