SISKIYOU COUNTY AIR POLLUTION CONTROL DISTRICT

RULE 4.12 - NEW SOURCE PERFORMANCE STANDARDS


A. Incorporation of Federal Standards

The provisions of Part 60, Chapter I, Title 40 of the Code of Federal Regulations (40 CFR Part 60), which are in effect on July 1, 1987, are incorporated herein as part of the Rules and Regulations of the Siskiyou County Air Pollution Control District.

B. Applicability

All new stationary sources of air pollution, and all modified or reconstructed stationary sources of air pollution shall comply with the standards, criteria, and requirements set forth herein. Whenever any source is subject to more than one rule, regulation, provision or requirement relating to the control of any air contaminant, the most stringent provision shall apply.

C. "Administrator" means "Control Officer"

For the purpose of this Rule, the word "Administrator" as used in 40 CFR Part 60 shall mean the Control Officer of the District, except where the reference to "Administrator" relates to approval of alternate or equivalent test methods or alternative work practices.

D. List of Incorporated CFR Provisions

The following table lists all 40 CFR Part 60 provisions which are incorporated in their entirety as part of this Rule. Notations in this list indicate deviations from the EPA promulgated provision found in the CFR which have been adopted by the District Board for inclusion in this Rule.

CFR Subpart Title
Subpart A General Provisions.
Subpart C Emission Guidelines and Compliance Times.
Subpart D Standards of Performance for Fossil Fuel-Fired Steam Generators for which Construction is Commenced after August 17, 1971.
Subpart Da Standards of Performance for Electric Utility Steam Generating Units for which Construction is Commenced after September 18, 1978.


NOTE:The 30-day emissions averaging periods specified in the federal standard are replaced with 24-hour emissions averaging periods for affected facilities in the District. CFR Subpart Title Subpart Db Standards of Performance for Industrial Commercial Institutional Steam Generating Units.
Subpart E Standards of Performance for Incinerators
Subpart F Standards of Performance for Portland Cement Plants.
Subpart G Standard of Performance for Nitric Acid Plants.
Subpart H Standard of Performance for Sulfuric Acid Plants.
Subpart I Standards of Performance for Hot Mix Asphalt Facilities.
Subpart J Standards of Performance for Petroleum Refineries.
Subpart K Standards of Performance for Storage Vessels for Petroleum Liquids Constructed after June 11, 1973 and Prior to May 19, 1978.
Subpart Ka Standards of Performance for Storage Vessels for Petroleum Liquids Constructed after May 18, 1978.
Subpart Kb Standards of Performance for Organic Liquid Storage Vessels for which Construction, Reconstruction or Modification Commenced after July 23, 1984.
Subpart L Standards of Performance for Secondary Lead Smelters.
Subpart M Standards of Performance for Secondary Brass and Bronze Production Plants.
Subpart N Standards of Performance for Primary Emissions from Basic Oxygen Process Furnaces for which Construction is Commenced after June 11, 1973.
Subpart Na Standards of Performance for Secondary Emissions from Basic Oxygen Process Steelmaking Facilities for which Construction is Commenced after January 20, 1983.
Subpart O Standards of Performance for Sewage Treatment Plants.
Subpart P Standards of Performance for Primary Copper Smelters.
Subpart Q Standards of Performance for Primary Zinc Smelters.
Subpart R Standards of Performance for Primary Lead Smelters.
Subpart S Standards of Performance for Primary Aluminum Reduction Plants.
Subpart T Standards of Performance for the Phosphate Fertilizer Industry: Wet-Process Phosphoric Acid Plants.
Subpart U Standards of Performance for the Phosphate Fertilizer Industry: Superphosphoric Acid Plants.
Subpart V Standards of Performance for the Phosphate Fertilizer Industry: Diammonium Phosphate Plants.
Subpart W Standards of Performance for the Phosphate Fertilizer Industry: Triple Superphosphate Plants.
Subpart X Standards of Performance for the Phosphate Fertilizer Industry: Granular Triple Superphosphate Storage Facilities.
Subpart Y Standards of Performance for Coal Preparation Plants.
Subpart Z Standards of Performance for Ferroalloy Production Facilities.
Subpart AA Standards of Performance for Steel Plants: Electric Arc Furnaces Constructed after October 21, 1974, and on or before August 17, 1983.
Subpart AAA Standards of Performance for Steel Plants: Electric Arc Furnaces and Argon-Oxygen Decarburization Vessels Constructed after August 17, 1983.
Subpart BB Standards of Performance for Kraft Pulp Mills.
Subpart CC

Standards of Performance for Glass Manufacturing Plants.

NOTE: Section 60.292(e) in the federal standard al lows routine maintenance to be exempt from particulate matter standards--this exemption is deleted.

Subpart DD Standards of Performance for Grain Elevators.
Subpart EE

Standards of Performance or Surface Coating of Metal Furniture.

NOTE: The 30-day emissions averaging periods specified in the federal standard are re placed with 24-hour emissions averaging periods for affected facilities in the District.

Subpart GG Standards of Performance for Stationary Gas Turbines.
Subpart HH Standards of Performance for Lime Manufacturing Plants.
Subpart KK Standards of Performance for Lead-Acid Battery Manufacturing Plants.
Subpart LL Standards of Performance for Metallic Mineral Processing Plants.
Subpart MM

Standards of Performance for Automobile and Light Duty Truck Surface Coating Operations.

NOTE: The 30-day emissions averaging periods specified in the federal standard are re placed with 24-hour emissions averaging periods for affected facilities in the District.

Subpart NN Standards of Performance for Phosphate Rock Plants.
Subpart PP Standards of Performance for Ammonium Sulfate Manufacture.
Subpart QQ

Standards of Performance for the Graphic Arts Industry: Publication Rotogravure Printing.

NOTE: The 30-day emissions averaging periods specified in the federal standard are replaced with 24-hour emissions averaging periods for affected facilities in the District.

Subpart RR

Standards of Performance for Pressure Sensitive Tape and Label Surface Coating Operations.

NOTE: The 30-day emissions averaging periods specified in the federal standard are replaced with 24-hour emissions averaging periods for affected facilities in the District.

Subpart SS

Standards of Performance for Industrial Surface Coating: Large Appliances.

NOTE: The 30-day emissions averaging periods specified in the federal standard are replaced with 24-hour emissions averaging periods for affected facilities in the District.

Subpart TT

Standards of Performance for Metal Coil Surface Coating.

NOTE: The 30-day emissions averaging periods specified in the federal standard are replaced with 24-hour emissions averaging periods for affected facilities in the District.

Subpart UU Standards of Performance for Asphalt Processing and Asphalt Roofing Manufacture.
Subpart VV

Standards of Performance for Equipment Leaks of VOC in the Synthetic Organic Chemicals Manufacturing Industry.

NOTE: The observation of a leak in excess of the standard constitutes a violation of this rule. This provision is added to Section 60.592.1.

Subpart WW Standards of Performance for the Beverage Can Surface Coating Industry.

NOTE: The 30-day emissions averaging periods specified in the federal standard are replaced with 24-hour emissions averaging periods for affected facilities in the District.
Subpart XX

Standards of Performance for Bulk Gasoline Terminals.

NOTE: California Air Resources Board (CARB) Certification and Test Procedures for Vapor Recovery Systems of Gasoline Delivery Tanks shall be followed in lieu of the federal procedure as shown in the CFR. Documentation and recordkeeping requirements shall record results of CARB Certification tests.

Subpart AAA Standards of performance for New Residential Wood Heaters.
Subpart BBB Standards of Performance for the Rubber Tire Manufacturing Industry.
Subpart FFF

Standards of Performance for Flexible Vinyl and Urethane Coating and Printing.

NOTE: The 30-day emissions averaging periods specified in the federal standard are replaced with 24-hour emissions averaging periods for affected facilities in the District. The monthly basis used to calculate the VOC content from the source performance test in the federal standard is replaced with a 24-hour period to demonstrate compliance on a daily basis for affected facilities in the District.

Subpart GGG Standards of Performance for Equipment Leaks of VOC in Petroleum Refineries.

NOTE: The observation of a leak in excess of the standard constitutes a violation of this rule. This provision is added to Section 60.592.1.
Subpart HHH Standards of Performance for Synthetic Fiber Production Facilities.

NOTE: The six-month rolling average basis specified in the federal standard is replaced with 24-hour emissions averaging periods for affected facilities in the District.
Subpart JJJ Standards of Performance for Petroleum Dry Cleaners.

NOTE: The observation of a leak in excess of the standard constitutes a violation of this rule. This provision is added to Section 60.592.1.
Subpart KKK Standards of Performance for Equipment Leaks of VOC from Onshore Natural Gas Processing Plants.
Subpart LLL Standards of Performance for Onshore Natural Gas Processing; SO2 Emissions.
Subpart OOO Standards of Performance for Nonmetallic Mineral Processing Plants.
Subpart PPP Standards of Performance for Wool Fiberglass Insulation Manufacturing Plants.
Subpart QQQ Standards of Performance for VOC Emissions from Petroleum Refinery Waste Water Systems.
Subpart SSS Standards of Performance for Magnetic Tape Manufacturing.
Subpart TTT Standards of Performance for Industrial Surface Coating; Plastic parts for Business Machines.
Appendix A Reference Methods.
Appendix B Performance Specifications.

* * * * *