CDTi Purifilter Plus M

This page last reviewed January 6, 2014.

PLEASE NOTE: Verifications are issued chronologically.  The most recently issued Executive Order or individual attachment is the one which is currently in effect and is listed below each manufacturer’s verification.  The most recent Executive Order supersedes any previous Executive Orders for the same product.   Should you wish to view any previous Executive Orders or attachments for reference purposes related to a manufacturer’s verification, please click on the associated link below each description.

The Air Resources Board has verified the ECS Purifilter™ (hereafter referred to as CDTi) Plus M system for select 1993 through 2010 model year heavy-duty on-road diesel engines used in on-road applications.  The Purifilter™ Plus M system reduces emissions of diesel particulate matter by at least 85 percent and is designated as a Level 3 Plus system.  The primary components of the Purifilter™ Plus M include an electric heating element for active regeneration, a catalyzed silicon carbide diesel particulate filter for passive regeneration, and a backpressure monitoring and notification system.  The Purifilter™ Plus M system is compatible with on-road vehicles using diesel fuel that contains up to 20 percent biodiesel.  Specific engine families and conditions for which the PurifilterTM  Plus M system has been approved may be found in the Executive Order below.

EXECUTIVE ORDER PARTS LIST ENGINE FAMILY LIST LABEL SWAPPING & RE-DESIGNATION POLICY
December 16, 2013

December 16, 2013 (CA)

December 16, 2013 (FED)

December 16, 2013
THE FOLLOWING EXECUTIVE ORDERS ARE SUPERSEDED
October 29, 2012

October 29, 2012 (CA)

October 29, 2012 (FED)

October 29, 2012

September 6, 2011

September 6, 2011

 




 

 

 

preload