HUSS Incorporated FS-MK On-Road

This page last reviewed February 6, 2013.

PLEASE NOTE: Verifications are issued chronologically.  The most recently issued Executive Order or individual attachment is the one which is currently in effect and is listed below each manufacturer’s verification.  The most recent Executive Order supersedes any previous Executive Orders for the same product.   Should you wish to view any previous Executive Orders or attachments for reference purposes related to a manufacturer’s verification, please click on the associated link below each description.

The Air Resources Board has verified the Huss, Incorporated FS-MK filter as a Level 3 Plus diesel emission control system for use with certain on-road diesel engines rated to at most 810 horsepower. The FS-MK series of filters uses a silicon carbide wall-flow filter with a fuel burner for regeneration to achieve an 85 percent reduction in particulate matter emissions. In addition, the HUSS FS-MK filter may be used with diesel fuel that contains as much as 20 percent biodiesel. Specific conditions for which the FS-MK has been approved may be found in the Executive Orders.  HUSS has an approved redesignation policy but does not allow filter swapping.

EXECUTIVE ORDER PARTS LIST ENGINE FAMILY LIST LABEL SWAPPING & RE-DESIGNATION POLICY
January 31, 2013 January 31, 2013 January 31, 2013
THE FOLLOWING EXECUTIVE ORDERS ARE SUPERSEDED
September 24, 2012
June 11, 2012

February 17, 2012
February 17, 2012 February 17, 2012
  August 16, 2011 August 16, 2011

February 14, 2011
October 8, 2009
August 5, 2009
July 25, 2008
November 13, 2006


 

 

 

preload