DAY 1

Introduction

Best Available Retrofit Technology is Dictated to Control Diesel Solid Ultrafine Particles
Dr. John J. Mooney

Session 1: Motivation and Targets

Health Effects Due to Solid Ultrafine Particles
Dr. Alison Elder

Clean Air Targets for California: Diesel Emissions and the Role of Research for Informing
Dr. Alberto Ayala

Session 2: Particle Physics and Metrology

Physics of Solid Particles Emitted by IC-Engines
Professor David Kittelson

Metrology and Instrumentation
Dr. Markus Kasper

Session 3: Particle Filtration of Diesel Exhaust

Physics of Filtration of Particles
Dr. Hans-Joerg Rembor

Filter Media: Ceramics, Metal and Fibers
Dr. Noah Loren

Session 4: Regeneration of Filters

Challenge to Clean FIlters from Collected Soot
Dr. Michael Streichsbier

Catalytic -Based Surfaces for Filter Regenration
Dr. Claus Goersmann

Fuel Borne Catalysts for Filter Regeneration
Dr. Paul Richards

Diesel Burners for Filter Regeneration: Burners for Filter Regeneration Supported by Catalysis
Dr. Hans-Joerg Rembor

Disposable Filter and DPF Systems with Regeneration Procedures through Electrical Heating
Urich Lampen

Session 5: Applications

Available and Approved Technology
Andreas C.R. Mayer

Matching of Particle Filter System to a Given Application
Dr. Hans-Joerg Rembor

Effects on Engines and Effects by Engines
Francois Jaussi

On-Board Detection Control and Electronic Management
Robert Grodde

DAY 2

Session 6: Verification and Quality Control

Diesel Emission Control Strategy Verification Program
Ms. Shawn Daley

Multimedia Verificaiton for Fuel Borne Catalysts
Ms. Aubrey Sideco

Session 7: Experience (Part A)

4 Million BAT-Filters Successfully in Cars
Dr. Gerard Belot

Heavy Duty Vehicle Original Equipment Application for US 2007
Dr. Z. Gerald Liu

ARB/AQMD/MSRC Showcase
Mr. John Karim

Session 7: Experience (Part B)

Locomotives and Ships
Mr. Christhof Hug

CRT: 1,200 Berlin Buses Retrofitted Since 2000
Mr. Burkhard Eberwein

10,000 Buses and Construction Machines in London
Dr. Matthew Vincent

20,000 Constuction Machines in Switzerland
Mr. Francois Jaussi

Session 7: Experience (Part C)

North America Durability Demonstration of Retrofit Options for Off-Road Equipment
Mr. Kevin Brown

Typical Failures and How to Avoid Them
Mr. Andreas C.R. Mayer

DPFF Technology in Underground Mines
Dr. Aleksandar Bugarski

Influences of Fuels and Lubricants
Mr. Frank Machatschek

Session 8: Secondary Emissions

Toxics Generated and Emitted by Filters
Dr. Norbert Heeb

Session 9: Combined Systems - DPF + NOx Reduction

Soot Elimination + NOx Reduction Combined
Dr. Joseph Kubsh