G-70-150-AD Modification of Certification of Gilbarco VaporVac Phase II Vapor Recovery System

California Air Resources Board

Executive Order G-70-150-AD

This page updated July 14, 2004.

Executive Order G-70-150-AD
Modification of the Certification of the Gilbarco VaporVac Phase II Vapor Recovery System (Acrobat 818K)

The above document is also available below in its 16 subparts:

Legal	Legal Language (Acrobat 78K)
Exhibit 1	Equipment List (Acrobat 31K)
Figure 1A	OPW Model 11VAI-xx Nozzle (Acrobat 50K)
Figure 1B	Husky Model V3-6201xxx Nozzle (Acrobat 26K)
Figure 1C	Emco Wheaton Model A4500 Nozzle (Acrobat 59K)
Exhibit 2	Specifications for the VaporVac Bootless Nozzle System (Acrobat 25K)
Figure 2A-1	Typical Installation of the Gilbarco VaporVac Phase II Vapor Recovery System with Two-Point Phase I System (Acrobat 57K)
Figure 2A-2	Typical Installation of the Gilbarco VaporVac Phase II Vapor Recovery System with Two-Point Phase I System (Acrobat 47K)
Figure 2A-3	Typical Installation of the Gilbarco VaporVac Phase II Vapor Recovery System with Two-Point Phase I System (Acrobat 52K)
Figure 2A-4	Typical Installation of the Gilbarco VaporVac Phase II Vapor Recovery System with Two-Point Phase I System (Acrobat 52K)
Figure 2B-1	Component Parts of the VaporVac System (Acrobat 66K)
Figure 2B-2	VaporVac Dispenser Types (Acrobat 234K)
Exhibit 3	Static Pressure Integrity Test Underground Storage Tanks (Acrobat 132K)
Table 3-1	Pressure Decay Leak Rate Criteria (Acrobat 8K)
Form 3-1	Summary of Source Test Results (Acrobat 14K)
Exhibit 4	Ten Gallon Per Minute Requirement (Acrobat 8K)

Top of Page

Phase II Executive Orders

A Department of the California Environmental Protection Agency