Executive Order: 2009-12-31 VR-204-G VST Phase II Enhanced Vapor Recovery (EVR) System Including In-Station Diagnostics (ISD)

California Air Resources Board

Executive Order VR-204-G

This page last updated January 12, 2010

For Netscape users - hold SHIFT key and click the link for download
For Explorer users - right click the link and select "Save Target As..." for download
or
Simply click the link to allow the PDF Reader to open the document within the browser

Executive Order VR-204-G

VST Phase II Enhanced Vapor Recovery System Including In-Station Diagnostics (ISD)
Full VR-204-G Download [PDF - 4.2MB]

Legal	Legal Document
Exhibit 1	Equipment List
Exhibit 2	System Specifications
Exhibit 3	Performance Standards and Specifications
Exhibit 4	Required Items in Conducting TP-201.3
Exhibit 5	Liquid Removal Test Procedure
Exhibit 6	VST ECS Hydrocarbon Sensor Verification Test Procedure
Exhibit 7	Warranty
Exhibit 8	Vapor Pressure Sensor Verification Test Prodecure
Exhibit 9	Determination of VST ECS Processor Activation Pressure
Exhibit 10	Nozzle Bag Test Procedure
Exhibit 11	Veeder-Root Vapor Polisher Operability Test Procedure
Exhibit 12	Veeder-Root Vapor Polisher Hydrocarbon Emissions Verification Test Prodecure
Exhibit 13	ISD Vapor Flow Meter Operability Test Procedure
Exhibit 14	Required Items For Conducting TP-201.4

Installation, Operaton and Maintenance Manual (IOM)

Full IOM VR-204-G Download [PDF - 18.06MB]

Cover
Table of Contents
Section 1	About VST
Section 2	Table of Terms and Abbreviations
Section 3	VST Contractor Requirements
Section 4	System Components
Section 5	Overview: EVR Balance Total System
Section 6	Daily Inspections
Section 7	Annual Inspections and Replacements
Section 8	ISD Alarm Troubleshooting Summary
Section 9	Drive-Offs and Customer Abuse
Section 10	Nozzle Installation
Section 11	Nozzle Repair Kit
Section 12	Hose Installations
Section 13	Breakaway Device Installation
Section 14	VST ECS Membrane Processor Installation
Section 15	VST ECS Membrane Processor Operation, Maintenance and Start-Up Manual
Section 16	Veeder-Root ISD Installation Manual
Section 17	Veeder-Root Pressure Sensor Installation Guide
Section 18	Veeder-Root Carbon Canister Vapor Polisher Installation
Section 19	Veeder-Root ISD Vapor Flow Meter Installation Guide

Modification Highlights

The superseded version of the above document can be found by clicking on the link below:

Superseded Executive Order VR-204-F

Superseded Executive Order VR-204-E

Superseded Executive Order VR-204-D

Superseded Executive Order VR-204-C

Superseded Executive Order VR-204-A

VST Hanging Hardware Compatibility Approval Letter #07-09
November 27, 2007 letter to Vapor Systems Technologies approving VST's
EVR hanging hardward as replacement components on Pre-EVR balance vapor recovery systems.

Top of Page

Executive Orders

A Department of the California Environmental Protection Agency