Executive Order: 2009-05-07 VR-205-B* VST Phase II Enhanced Vapor Recovery (EVR) System Not-Including In-Station Diagnostics (ISD)
This page last reviewed November 9, 2011
Executive Order VR-205-B
VST Phase II Enhanced Vapor Recovery System with HIRT VCS 100 Thermal Oxidizer Not-Including In-Station Diagnostics (ISD)
Full VR-205-B Download [PDF - 1.6MB]
|Performance Standards and Specifications|
|Required Items in Conducting TP-201.3|
|Liquid Removal Test Procedure|
|Required Items in Conducting TP-201.4|
|Nozzle Bag Test Procedure|
|HIRT VCS 100 Processor with Indicator Panel Operability Test Procedure|
Installation, Operaton and Maintenance Manual (IOM)
Full IOM VR-205-B Download [PDF - 1.9MB]
|Table of Terms and Abbreviations|
|Overview EVR Balance Total System|
|Alarm Troubleshooting Summary|
|Drive-Offs and Customer Abuse|
|Nozzle Repair Kit|
|Hirt VCS 100 Vapor Processor and Indicator Panel|
* Executive Order VR-205-B issued on July 2, 2009 is
superseded by Executive Order VR-203-H or subsequent revisions.
VST Phase II EVR Systems certified under Executive Order VR-205-A through B may remain in use at existing installations up to four years after the expiration date of the Executive Order.
September 22, 2010 Letter
to Vapor Systems Technologies (VST) regarding the addition of a
hold-open latch release mechanism on the VST Enhanced Vapor Recovery
August 24, 2010 Letter to Vapor Systems Technologies (VST) regarding the removal of hold-open latches on the VST Enhanced Vapor Recovery (EVR) nozzles.
VST Hanging Hardware Compatibility Approval Letter #07-09 November 27, 2007 letter
to Vapor Systems Technologies approving VST's EVR hanging hardward as
replacement components on Pre-EVR balance vapor recovery systems.
The superseded version of the above document can be found by clicking on the link below: