Executive Order VR-209-A*

This page last reviewed November 9, 2011

Executive Order VR-209-A

VST Phase II Enhanced Vapor Recovery System with FFS Clean Air Separtor Not-Including In-Station Diagnostics (ISD)
Full VR-209-A Download [PDF - 1.9MB]

Legal	Legal Document
Exhibit 1	Equipment List
Exhibit 2	System Specifications
Exhibit 3	Performance Standards and Specifications
Exhibit 4	Determination of Static Pressure Performance of the Healy Clean Air Separator
Exhibit 5	Liquid Removal Test Procedure
Exhibit 6	Required Items in Conducting TP-201.4
Exhibit 7	Nozzle Bag Test Procedure
Exhibit 8	Required Items in Conducting TP-201.3
Exhibit 9	Warranty

Installation, Operaton and Maintenance Manual (IOM)

Full IOM VR-209-A Download [PDF - 1.8MB]

Cover
Table of contents
Section 1	About VST
Section 2	Table of Terms and Abbreviations
Section 3	Contractor Requirements
Section 4	System Components
Section 5	Weekly and Quarterly Inspections
Section 6	Annual Inspections
Section 7	Drive-Offs and other Customer Abuse
Section 8	Nozzle Installation
Section 9	Nozzle Repair Kit
Section 10	Hoses
Section 11	Breakaway Devices
Section 12	Installation Instructions for Clean Air Separator

* Executive Order VR-209-A issued on November 4, 2009 is superseded by Executive Order VR-203-H or subsequent revisions. 
VST Phase II EVR Systems certified under Executive Order VR-209-A may remain in use at existing installations up to four years after the expiration date of the Executive Order.

September 22, 2010 Letter to Vapor Systems Technologies (VST) regarding the addition of a hold-open latch release mechanism on the VST Enhanced Vapor Recovery (EVR) nozzles.


August 24, 2010 Letter to Vapor Systems Technologies (VST) regarding the removal of hold-open latches on the VST Enhanced Vapor Recovery (EVR) nozzles.