IMPCO Technologies Canada CLEARSKY DPF

This page last reviewed May 18, 2017.

PLEASE NOTE: Verifications are issued chronologically.  The most recently issued Executive Order or individual attachment is the one which is currently in effect and is listed below each manufacturer’s verification.  The most recent Executive Order supersedes any previous Executive Orders for the same product.   Should you wish to view any previous Executive Orders or attachments for reference purposes related to a manufacturer’s verification, please click on the associated link below each description.

The Air Resources Board (ARB) has verified the IMPCO Technologies Canada Incorporated’s (IMPCO) CLEARSKY diesel particulate filter (CLEARSKY DPF) system.  The system is a Level 3 plus actively regenerated diesel emission control system for use with Carrier and ComfortPro auxiliary power units powered by select Kubota Z482 diesel engines with model years between 2009 and 2017.  The CLEARSKY DPF uses a wall-flow filter with a heating element for regeneration to achieve an 85 percent reduction in emissions of diesel particulate matter and is compliant with ARB’s 2009 nitrogen dioxide standard.  Specific conditions for which the CLEARSKY DPF has been approved are found in the Executive Order below.

EXECUTIVE ORDER PARTS LIST ENGINE FAMILY LIST LABEL SWAPPING & RE-DESIGNATION POLICY
March 14, 2017

March 14, 2017

March 14, 2017
THE FOLLOWING EXECUTIVE ORDERS AND ATTACHMENTS ARE SUPERSEDED
December 31, 2014

December 31, 2014

December 31, 2014
April 29, 2014

April 29, 2014

April 29, 2014
March 20, 2012

March 20, 2012

March 20, 2012

 

 

 

preload