AMAAPCD RULE 212 PROCESS WEIGHT TABLE
LAST REVISED 11/11/11

Rule 212  Process Weight Table.

                    ALLOWABLE RATE OF EMISSION BASED ON
                            PROCESS WEIGHT RATE

----------------------------------------------------------------------------
Process Weight Rate                                           Emission Rate
----------------------------------------------------------------------------
     Lbs/Hr.                                                      Lbs/Hr.
----------------------------------------------------------------------------
50. .  .  .  . .. .. .  . . . . . . . . . . . . . . . . . . . . . .0.4
100 .  .  .  . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.6
500 .  .  .  . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.5
1,000  .  .  . .. .. .  . . . . . . . . . . . . . . . . . .  . . . 2.3
5,000  .  .  . .. .. .  . . . . . . . . . . . . . . . . . . . . . .6.3
10,000 .  .  . .. .. .  . . . . . . . . . . . . . . . . . . . . . .9.7
20,000 .  .  . .. .. .  . . . . . . . . . . . . . . . . . . . . . 15.0
60,000 .  .  . .. .. .  . . . . . . . . . . . . . . . . . . . . . 29.6
80,000 .  .  . .. .. .  . . . . . . . . . . . . . . . . . . . . . 31.2
120,000.  .  . .. .. .  . . . . . . . . . . . . . . . . . . . . . 33.3
160,000.  .  . .. .. .  . . . . . . . . . . . . . . . . . . . . . 34.9
200,000.  .  . .. .. .  . . . . . . . . . . . . . . . . . . . . . 36.2
400,000.  .  . .. .. .  . . . . . . . . . . . . . . . . . . . . . 40.4
1,000,000 .  . .. .. .  . . . . . . . . . . . . . . . . . . . . . 46.8

Interpolation of the data for the process weight rates up to
60,000 lbs/hr. shall be accomplished by the use of the following
equation:
                                                                
    E=3.59 p0.62         P is less than or equal to 30 tons/hr.

and interpolation or extrapolation of the data for process
weights in excess of 60,000 lbs/hr. shall be accomplished by use
of the equation:

    E=17.31 p0.16        P is greater than 30 tons/hr.      

Where:   E=Emission in pounds per hour.
         P=Process weight in tons per hour.