BAY AREA AIR QUALITY MANAGEMENT DISTRICT


REGULATION 8

ORGANIC COMPOUNDS

RULE 14

SURFACE COATING OF LARGE APPLIANCES AND METAL FURNITURE

INDEX

8-14-100 GENERAL

8-14-200 DEFINITIONS

8-14-300 STANDARDS

8-14-400 ADMINISTRATIVE REQUIREMENTS

8-14-500 MONITORING AND RECORDS

8-14-600 MANUAL OF PROCEDURES


REGULATION 8

ORGANIC COMPOUNDS

RULE 14

SURFACE COATING OF LARGE APPLIANCES AND METAL FURNITURE

(Adopted March 7, 1979)

8-14-100 GENERAL

8-14-200 DEFINITIONS

8-14-300 STANDARDS

8-14-303 Deleted June 7, 1989

8-14-304 Transfer Efficiency: All persons subject to this Rule shall use a method of coating application with a transfer efficiency of 65% or greater. Application by properly operated electrostatic application or HVLP spray, flow coat, roller coat, dip coat including electrodeposition and brush coat will serve to comply with this section. (Amended 3/3/82; December 19, 1984; June 7, 1989)

8-14-305 Deleted October 6, 1993

8-14-306 Deleted June 7, 1989

8-14-307 Deleted June 7, 1989

8-14-308 Prohibition of Specification: No person shall require for use or specify the application of a coating subject to this Rule if such use or application results in a violation of any of the provisions of this Rule. The prohibition of this Section shall apply to all written or oral contracts under the terms of which any coating is to be applied to any large appliance for metal furniture product at any physical location within the District. (Adopted January 7, 1987; Amended June 7, 1989)

8-14-309 Compliance Statement Requirement: The manufacturer of coatings subject to this Rule shall include a designation of VOC (as defined in Section 8-14-206) expressed in grams per liter or pounds per gallon of coating, excluding water. (Adopted January 7, 1987; Amended April 1, 1987; June 7, 1989)

8-14-310 Specialty Coating Limitations: A person shall not apply to any large appliance or metal furniture any specialty coating with a VOC content in excess of the following limits, expressed as grams of VOC per liter (lb VOC per gal) of coating applied, excluding water, unless emissions to the atmosphere are controlled to an equivalent level by air pollution abatement equipment with an abatement device efficiency of at least 85% that meets the requirements of Regulation 2, Rule 1.

    Baked Air-Dried
310.1 High-Gloss 360 (3.0) 420 (3.5)
310.2 Heat-Resistant 360 (3.0) 420 (3.5)
310.3 Metallic Topcoat 360 (3.0) 420 (3.5)
310.4 Pretreatment Wast Primer 420 (3.5) 420 (3.5)
310.5 Solar Absorbant 360 (3.0) 420 (3.5)
(Adopted April 1, 1987; Amended June 7, 1989; October 6, 1993)



8-14-320 Surface Preparation and Cleanup Solvent: The requirements of this Section shall apply to any person using organic solvent for surface preparation or cleanup:

8-14-400 ADMINISTRATIVE REQUIREMENTS

8-14-500 MONITORING AND RECORDS

8-14-600 MANUAL OF PROCEDURES