MONTEREY BAY UNIFIED AIR POLLUTION CONTROL DISTRICT
 


RULE 423 NEW SOURCE PERFORMANCE STANDARDS (NSPS)
(Revised 2-2-84, 12-13-84, 3-20-85, 12-17-86, 12-16-87, 4-19-89, 2-20-91, and 9-17-97 )
CONTENTS


 

  1. INCORPORATION OF FEDERAL STANDARDS
  2. APPLICABILITY
  3. DEFINITION:  ADMINISTRATOR
  4. LIST OF INCORPORATED CFR PROVISIONS
  1. Incorporation of Federal Standards.
    The provisions of Part 60, Chapter I, Title 40 of the Code of Federal Regulations (40 CFR Part 60), which are in effect on July 1, 1996, are incorporated herein as part of the Rules and Regulations of the Monterey Bay Unified Air Pollution Control District.  Applicable provisions of 40 CFR Part 60 include those incorporated in the current bound CFR volume plus any provisions recently promulgated by the United States Environmental Protection Agency (US EPA), as noticed in the Federal Register, but not yet incorporated into the bound CFR.  Where there are currently effective provisions which are not yet included in the bound CFR volume, the Federal Register notice by which each provision was promulgated is referenced at the affected Subpart.
     
  2. Applicability.
    All new stationary sources of air pollution, and all modified or reconstructed stationary sources of air pollution shall comply with the standards, criteria, and requirements set forth herein.  Whenever any source is subject to more than one rule, regulation, provision or requirement relating to the control of any air contaminant, the most stringent provision shall apply.
     
  3. "Administrator" means "APCO".
    For the purpose of this Rule, the word "Administrator" as used in 40 CFR Part 60 shall mean the Air Pollution Control Officer (APCO) of the District, except where the reference to "Administrator" relates to approval of alternate or equivalent test methods or alternative work practices.
     
  4. List of Incorporated CFR Provisions.
    The following table lists all 40 CFR Part 60 provisions which are incorporated in their entirety as part of this Rule.  Federal Register (FR) references are to currently effective provisions promulgated or revised by US EPA but not yet incorporated into the currently available CFR volume.  Notations in this list indicate deviations from the US EPA-promulgated provision found in the CFR which have been adopted by the District Board for inclusion in this Rule.

FR SUBPART TITLE
Subpart A General Provisions
Subpart C Emission Guidelines and Compliance Times
Subpart Cb Emission Guidelines and Compliance Times for Municipal Waste Combustors That Are Constructed on or Before December 19, 1995
Subpart Cc Emission Guidelines and Compliance Times for Municipal Solid Waste Landfills
Subpart Cd Emission Guidelines and Compliance Times for Sulfuric Acid Production Units
Subpart D Standards of Performance for Fossil-Fuel-Fired Steam Generators for Which Construction is Commenced After August 17, 1971
Subpart Da Standards of Performance for Electric Utility Steam Generating Units for Which Construction is Commenced After September 18, 1978
NOTE: The 30-day emissions averaging periods specified in the federal standard are replaced with 24-hour emissions averaging periods for affected facilities in the District.
Subpart Db Standards of Performance for Industrial-Commercial-Institutional Steam Generating Units
Subpart Dc Standards of Performance for Small Industrial-Commercial-Institutional Steam Generating Units
Subpart E Standards of Performance for Incinerators.
Subpart Ea Standards of Performance for Municipal Waste Combustors for Which Construction is Commenced after December 20, 1989 and on or Before September 20, 1994
Subpart Eb Standards of Performance for Municipal Waste Combustors for Which Construction is Commenced After September 20, 1994
Subpart F Standards of Performance for Portland Cement Plants
Subpart G Standard of Performance for Nitric Acid Plants
Subpart H Standard of Performance for Sulfuric Acid Plants
Subpart I Standards of Performance for Hot Mix Asphalt Facilities
Subpart J Standards of Performance for Petroleum Refineries
Subpart K Standards of Performance for Storage Vessels for Petroleum Liquids for Which Construction, Reconstruction, or Modification Commenced After June 11, 1973, and Prior to May 19, 1978
Subpart Ka Standards of Performance for Storage Vessels for Petroleum Liquids for Which Construction, Reconstruction, or Modification Commenced After May 18, 1978, and Prior to July 23, 1984
Subpart Kb Standards of Performance for Volatile Organic Liquid Storage Vessels (Including Petroleum Liquid Storage Vessels) for Which Construction, Reconstruction, or Modification Commenced after July 23, 1984
Subpart L Standards of Performance for Secondary Lead Smelters
Subpart M Standards of Performance for Secondary Brass and Bronze Production Plants
Subpart N Standards of Performance for Primary Emissions from Basic Oxygen Process Furnaces for Which Construction is Commenced After June 11, 1973
Subpart Na Standards of Performance for Secondary Emissions from Basic Oxygen Process Steelmaking Facilities for Which Construction is Commenced After January 20, 1983
Subpart O Standards of Performance for Sewage Treatment Plants
Subpart P Standards of Performance for Primary Copper Smelters
Subpart Q Standards of Performance for Primary Zinc Smelters
Subpart R Standards of Performance for Primary Lead Smelters
Subpart S Standards of Performance for Primary Aluminum Reduction Plants
Subpart T Standards of Performance for the Phosphate Fertilizer Industry: Wet-Process Phosphoric Acid Plants
Subpart U Standards of Performance for the Phosphate Fertilizer Industry: Superphosphoric Acid Plants
Subpart V Standards of Performance for the Phosphate Fertilizer Industry:  Diammonium Phosphate Plants
Subpart W Standards of Performance for the Phosphate Fertilizer Industry:  Triple Superphosphate Plants
Subpart X Standards of Performance for the Phosphate Fertilizer Industry:  Granular Triple Superphosphate Storage Facilities
Subpart Y Standards of Performance for Coal Preparation Plants
Subpart Z Standards of Performance for Ferroalloy Production Facilities
Subpart AA Standards of Performance for Steel Plants:  Electric Arc Furnaces Constructed After October 21, 1974, and on or Before August 17, 1983
Subpart AAa Standards of Performance for Steel Plants:  Electric Arc Furnaces and Argon-Oxygen Decarburization Vessels Constructed After August 17, 1983
Subpart BB Standards of Performance for Kraft Pulp Mills
Subpart CC Standards of Performance for Glass Manufacturing Plants
Subpart DD Standards of Performance for Grain Elevators
Subpart EE Standards of Performance for Surface Coating of Metal Furniture
NOTE: The 30-day emissions averaging periods specified in the federal standard are replaced with 24-hour emissions averaging periods for affected facilities in the District.
Subpart GG Standards of Performance for Stationary Gas Turbines
Subpart HH Standards of Performance for Lime Manufacturing Plants
Subpart KK Standards of Performance for Lead-Acid Battery Manufacturing Plants
Subpart LL Standards of Performance for Metallic Mineral Processing Plants
Subpart MM Standards of Performance for Automobile and Light Duty Truck Surface Coating Operations.
NOTE: The 30-day emissions averaging periods specified in the federal standard are replaced with 24-hour emissions averaging periods for affected facilities in the District.
Subpart NN Standards of Performance for Phosphate Rock Plants
Subpart PP Standards of Performance for Ammonium Sulfate Manufacture
Subpart QQ Standards of Performance for the Graphic Arts Industry:  Publication Rotogravure Printing.
NOTE:The 30-day emissions averaging periods specified in the federal standard are replaced with 24-hour emissions averaging periods for affected facilities in the District
Subpart RR Standards of Performance for Pressure Sensitive Tape and Label Surface Coating Operations
NOTE: The 30-day emissions averaging periods specified in the federal standard are replaced with 24-hour emissions averaging periods for affected facilities in the District.
Subpart SS Standards of Performance for Industrial Surface Coating:  Large Appliances
NOTE: The 30-day emissions averaging periods specified in the federal standard are replaced with 24-hour emissions averaging periods for affected facilities in the District.
Subpart TT Standards of Performance for Metal Coil Surface Coating
NOTE: The 30-day emissions averaging periods specified in the federal standard are replaced with 24-hour emissions averaging periods for affected facilities in the District.
Subpart UU Standards of Performance for Asphalt Processing and Asphalt Roofing Manufacture.
Subpart VV Standards of Performance for Equipment Leaks of VOC in the Synthetic Organic Chemicals Manufacturing Industry. 
NOTE: The observation of a leak in excess of the requirements of the standard constitutes a violation of this Rule.  This provision is added to Sections 60.482 through 60.484 and 60.482-7 through 60.482-8.
Subpart WW Standards of Performance for the Beverage Can Surface Coating Industry
NOTE: The 30-day emissions averaging periods specified in the federal standard are replaced with 24-hour emissions averaging periods for affected facilities in the District.
Subpart XX Standards of Performance for Bulk Gasoline Terminals.
NOTE: California Air Resources Board (CARB) Certification and Test Procedures for Vapor Recovery Systems of Gasoline Delivery Tanks shall be followed in lieu of the federal procedure as shown in the CFR.  Documentation and record keeping requirements shall record results of CARB Certification tests. 
Subpart AAA Standards of Performance for New Residential Wood Heaters
Subpart BBB Standards of Performance for the Rubber Tire Manufacturing Industry
Subpart DDD Standards of Performance for Volatile Organic Compound (VOC) Emissions from the Polymer Manufacturing Industry
Subpart FFF Standards of Performance for Flexible Vinyl and Urethane Coating and Printing
NOTE: The 30-day emissions averaging periods specified in the federal standard are replaced with 24-hour emissions averaging periods for affected facilities in the District. The monthly basis used to calculate the VOC content from the source performance test in the federal standard is replaced with a 24-hour period to demonstrate compliance on a daily basis for affected facilities in the District.
Subpart GGG Standards of Performance for Equipment Leaks of VOC in Petroleum Refineries
NOTE: The observation of a leak in excess of the standard constitutes a violation of this rule.  This provision is added to Section 60.592.1.
Subpart HHH Standards of Performance for Synthetic Fiber Production Facilities
NOTE: The six-month rolling average basis specified in the federal standard is replaced with 24-hour emission averaging periods for affected facilities in the District.
Subpart III Standards of Performance for Volatile Organic Compound (VOC) Emissions From the Synthetic Organic Chemical Manufacturing Industry (SOCMI) Air Oxidation Unit Processes
Subpart JJJ Standards of Performance for Petroleum Dry Cleaners
NOTE The observation of a leak in excess of the requirements of the standard constitutes a violation of this rule. This provision is added to Section 60.622.
Subpart KKK Standards of Performance for Equipment Leaks of VOC from Onshore Natural Gas Processing Plants
Subpart LLL Standards of Performance for Onshore Natural Gas Processing: SO2 Emissions
Subpart NNN Standards of Performance for Volatile Organic Compound (VOC) Emissions From Synthetic Organic Chemical Manufacturing Industry (SOCMI) Distillation Operations
Subpart OOO Standards of Performance for Nonmetallic Mineral Processing Plants (As revised at 62 FR 31351)
Subpart PPP Standards of Performance for Wool Fiberglass Insulation Manufacturing Plants
Subpart QQQ Standards of Performance for Petroleum Refinery Wastewater Systems
Subpart RRR Standards of Performance for Volatile Organic Compound Emissions From Synthetic Organic Chemical Manufacturing Industry (SOCMI) Reactor Processes
Subpart SSS Standards of Performance for Magnetic Tape Facilities
Subpart TTT Standards of Performance for Industrial Service Coating: Surface Coating of Plastic Parts for Business Machines
Subpart UUU Standards of Performance for Calciners and Dryers in Mineral Industries
Subpart VVV Standards of Performance for Polymeric Coating of Supporting Substrates Facilities
Subpart WWW Standards of Performance for Municipal Solid Waste Landfills
Appendix A to Part 60 Reference Methods
Appendix B to Part 60 Performance Specifications
Appendix F to Part 60 Quality Assurance Procedures
Appendix I to Part 60 Removable Label and Owner's Manual
* * * * *