SOUTH COAST AIR QUALITY MANAGEMENT DISTRICT

RULE 2011 - CHAPTER 6 - METHODS

District Method   1.1 Sample and velocity traverses for stationary sources 
District Method   1.2 Sample and velocity traverse for stationary sources with small stacks or ducts 
District Method   2.1 Determination of stack gas velocity and volumetric flow rate ( S-type Pitot tube) 
District Method   2.2 Direct measurement of gas volume through pipes and small ducts 
District Method   2.3 Determination of gas velocity and volumetric flow rate from small stacks or ducts 
District Method  3.1  Gas analysis for dry molecular weight and excess air 
District Method   4.1 Determination of moisture content in stack gases 
District Method   6.1 Determination of sulfuric acid and sulfur oxides from stationary sources. 
District Method  100.1  Instrumental analyzer procedures for continuous gaseous emission sampling 
District Method  307.91  Determination of sulfur in a gaseous matrix
EPA Method  6 Determination of sulfur dioxide emissions from stationary sources 
EPA Method  19 Determination of sulfur dioxide removal efficiency and particulate, sulfur dioxide and nitrogen oxides emission rates from electric utility steam generator (40 CFR Part 60 Appendix A) 
ASTM Method   D 4294 or D 2622-82 - Determination of sulfur in liquid fuels