SOUTH COAST AIR QUALITY MANAGEMENT DISTRICT

(Adopted Feb. 4, 1977)(Amended May 27, 1977)(Amended Jan. 6, 1978)
(Amended June 16, 1978)(Amended April 4, 1980)(Amended Sept. 5, 1980)
(Amended June 5, 1981)(Amended July 9, 1982)(Amended Dec. 3, 1982)
(Amended June 3, 1983)(Amended May 4, 1984)(Amended July 6, 1984)
(Amended Nov. 2, 1984)(Amended Dec. 6, 1985)(Amended May 1, 1987)
(Amended June 3, 1988)(Amended December 2, 1988)(Amended January 6, 1989)
(Amended June 2, 1989)(Amended June 1, 1990)(Amended June 7, 1991)
(Amended December 6, 1991)(Amended June 5, 1992)(Amended July 10, 1992)
(Amended June 11, 1993)(Amended October 8, 1993)(Amended June 10, 1994)
(Amended May 12, 1995)(Amended October 13, 1995)(Amended May 10, 1996)
(Amended May 9, 1997)(Amended May 8, 1998)(Amended June 12, 1998)
(Amended May 14, 1999)

RULE 301. PERMITTING AND ASSOCIATED FEES

(a) Applicability
California Health and Safety Code Section 40510 provides authority for the South Coast Air Quality Management District to adopt a fee schedule for the issuance of permits to cover the cost of evaluation, planning, inspection, and monitoring related to that activity. This rule establishes such a fee schedule and requires that fees be paid for:

    (1) Permit processing for Facility Permits [see subdivisions (o), (p) and (q)], Facility Registrations [see subdivision (v)], and Permits to Construct and/or Permits to Operate equipment (submitted pursuant to Regulation II) that may cause air pollution or equipment intended to control air pollution [see subdivision (c)].

    (2) Processing of applications for effecting emission reductions, banking emissions, obtaining emissions reduction credit certificates, or registering emission reduction credits, pursuant to Regulation XIII [see paragraph (c)(4)].

    (3) Annual operating permit renewal fee [see subdivision (d)].

    (4) Annual operating permit emissions fee [see subdivision (e)] or Regional Clean Air Incentives Market (RECLAIM) Trading Credits (RTCs) [see subdivision (o)].

    (5) Duplicate and reissued permits [see subdivision (f)].

    (6) Reinstating expired applications or permits [see subdivision (g)].

    (7) Reinstating revoked permits [see subdivision (h)].

    (8) RECLAIM Transaction Registration Fee [see subdivision (o)].

    (9) Non-Tradeable Allocation Credit Mitigation Fee [see subdivision (o)].

    (10) Environmental Impact Analysis, Air Quality Analysis, Health Risk Assessment, Public Notification on Significant Projects and Emission Reduction Credits (pursuant to Regulation XIII - New Source Review) [see paragraph (c)(4) and subdivision (i) of this rule].

    (11) Asbestos demolition and renovation activities [see subdivision (r)].

    (12) Lead abatement activities [see subdivision (s)].

    (13) Evaluation of permit applications submitted for compliance under a National Emission Standard for Hazardous Air Pollutants (NESHAP) [see subdivision (t)].

    (14) Certification of Clean Air Solvents [see subdivision (u)].

(b) Definitions

For the purpose of this rule, the following definitions shall apply:

    (1) ALTERATION or MODIFICATION means any physical change, change in method of operation of, or addition to, an existing equipment requiring an application for Permit to Construct pursuant to Rule 201. Routine maintenance and/or repair shall not be considered a physical change. A change in the method of operation of equipment, unless previously limited by an enforceable permit condition, shall not include:

    (2) BANKING means the process of recognizing and certifying emission reductions and registering transactions involving emission reduction credits.

    (3) CANCELLATION is an administrative action taken by the District which nullifies or voids a previously pending application for a permit.

    (4) CERTIFIED EQUIPMENT PERMIT means a permit issued to a manufacturer or distributor for a specific model or series of models of equipment. By this permit, the District certifies that the equipment meets all District rules and Best Available Control Technology (BACT) requirements under a set of conditions. Eligibility for the certification process shall be limited to equipment for which the following conditions exist, as determined by the Executive Officer:

    Certified Equipment Permit shall be valid for one year, and shall be renewed annually if the Executive Officer determines the equipment meets all District rules and BACT requirements. Certification shall not relieve the person constructing, installing or operating the equipment from the requirement to obtain all necessary permits to construct and permits to operate, or from compliance with any other District rule including the requirements of Regulation XIII.

    (5) CLEAN AIR SOLVENT is a VOC-containing material used to perform solvent cleaning, solvent finishing, or surface preparation operations or activities, which:

    (6) CLEAN AIR SOLVENT CERTIFICATE is a certificate issued by the District to a manufacturer or distributor for a specific product or class of products that meet(s) the criteria for a Clean Air Solvent.

    (7) CONTINUOUS EMISSIONS MONITORING SYSTEM (CEMS) is a system comprised of components that continuously measure all parameters necessary to determine pollutant concentration or pollutant mass emissions, pursuant to a District rule or regulation.

    (8) EMISSION FACTOR means the amount of air contaminant emitted per unit of time or per unit of material handled, processed, produced, or burned.

    (9) EMISSION REDUCTION CREDIT (ERC) means the amount of emissions reduction which is verified and determined by the Executive Officer to be eligible for credit in an emissions reduction bank.

    (10) EMISSION SOURCE is any equipment or process subject to Rule 222. The source does not require a permit, but the owner/operator is required to file information pursuant to Rule 222 and Rule 301(x).

    (11) EQUIPMENT means any article, machine, or other contrivance, or combination thereof, which may cause the issuance or control the issuance of air contaminants, and which:

    (12) EXPIRATION means the end of the period of validity for an application, Permit to Operate, or a temporary Permit to Operate.

    (13) FACILITY means any source, equipment, or grouping of equipment or sources, or other air contaminant-emitting activities which are located on one or more contiguous properties within the District, in actual physical contact or separated solely by a public roadway or other public right-of-way, and are owned or operated by the same person (or persons under common control) or an outer continental shelf (OCS) source as defined in 40 CFR § 55.2. Such above-described groupings, if on noncontiguous properties but connected only by land carrying a pipeline, shall not be considered one facility. Equipment or installations involved in crude oil and gas production in Southern California coastal or OCS waters, and transport of such crude oil and gas in Southern California coastal or OCS waters, shall be included in the same facility which is under the same ownership or use entitlement as the crude oil and gas facility on-shore.

    (14) FACILITY PERMIT is a permit which consolidates existing equipment permits and all new equipment at a facility, into one permit. A facility permit may be issued pursuant to Regulation XX and/or XXX.

    (15) FACILITY REGISTRATION is a permit which consolidates existing equipment permits and all new equipment at a facility into one permit. A Facility Registration may be issued at District discretion to any facility not subject to Regulation XX or XXX.

    (16) IDENTICAL EQUIPMENT means any equipment which is to be operated by the same operator, and have the same equipment address, and have the same operating conditions and processing material to the extent that a single permit evaluation would be required for the set of equipment. Portable equipment, while not operating at the same location, may qualify as identical equipment.

    (17) NON-ROAD ENGINE is a portable engine that requires a permit and is certified by the Executive Officer to be a Non-Road Engine regulated by U.S. EPA pursuant to 40 CFR Part 89.

    (18) PREMISES means one parcel of land or contiguous parcels of land under the same ownership or entitlement to use, not including the parcels which are remotely located and connected only by land carrying a pipeline.

    (19) QUALIFYING PORTABLE ENGINE is a portable engine that requires a permit and is certified by the Executive Officer to meet all the requirements of Non-Road Engine of 40 CFR Part 89 except date of manufacture, and has been demonstrated to meet the emission limitations of 40 CFR Section 89.112-96.

    (20) RECLAIM TRADING CREDITS (RTCs) means the amount of emissions credit available to a facility for use at the facility for transfer or sale to another party. Each RTC has a denomination of one pound of RECLAIM pollutant and a term of one year, and can be issued as part of a facility's Annual Allocation or alternatively in the form of an RTC certificate.

    (21) REGISTRATION PERMIT means a permit to construct or permit to operate issued to an owner/operator of equipment which has previously been issued a Certified Equipment Permit by the District. The owner/operator shall agree to operate under the conditions specified in the Certified Equipment Permit.

    (22) RELOCATION means the removal of an existing source from one parcel of land in the District and installation on another parcel of land where the two parcels are not in actual physical contact and are not separated solely by a public roadway or other public right-of-way.

    (23) REVOCATION is an action taken by the Hearing Board following a petition by the Executive Officer which invalidates a Permit to Construct or a Permit to Operate.

    (24) SMALL BUSINESS is as defined in Rule 102 as "Small Business."

    (25) SPECIFIC ORGANIC GASES are any of the following compounds:

    trifluoromethane (HFC-23)

    chlorodifluoromethane (HCFC-22)

    dichlorotrifluoroethane (HCFC-123)

    tetrafluoroethane (HFC-134a)

    dichlorofluoroethane (HCFC-141b)

    chlorodifluoroethane (HCFC-142b)

    1,1,1-trifluoroethane (HFC-143a)

    1,1-difluoroethane (HFC-152a)

    cyclic, branched, or linear, completely fluorinated alkanes

    cyclic, branched, or linear, completely fluorinated ethers with no unsaturations

    cyclic, branched, or linear, completely fluorinated tertiary amines with no unsaturations

    sulfur-containing perfluorocarbons with no unsaturations and with sulfur bonds only to carbon and fluorine.

    (26) STATEWIDE EQUIPMENT is equipment with a valid registration certificate issued by CARB for the Statewide Portable Equipment Registration Program.

    (27) STATIONARY SOURCE (or SOURCE) means any grouping of equipment or other air contaminant-emitting activities which are located on parcels of land within the District, in actual physical contact or separated solely by a public roadway or other public right-of-way, and are owned or operated by the same person or by persons under common control. Such above-described groupings, if remotely located and connected only by land carrying a pipeline, shall not be considered one stationary source. (Under RECLAIM, a SOURCE is any individual unit, piece of equipment or process which may emit an air contaminant and which is identified, or required to be identified, in the RECLAIM Facility Permit.)

    (28) TEMPORARY PERMIT TO OPERATE represents interim authorization to operate equipment until the Permit to Operate is granted or denied. A temporary Permit to Operate is not issued by the District but may exist pursuant to Rule 202.

(c) Fees for Permit Processing

    (1) Permit Processing Fee

    (2) Fee for Change of Operator or Additional Operator
    Under Rule 209 (Transfer and Voiding of Permits), a permit granted by the District is not transferable. Every applicant who files an application for a change of operator or additional operator with the same operating conditions of a Permit to Operate shall be subject to a permit processing fee as follows:

    (3) Change of Operating Condition, Alteration/Modification/Addition
    When an application is filed for a permit involving change of operating conditions, and/or a permit involving proposed alterations/modifications or additions resulting in a change to any existing equipment for which a Permit to Construct or a Permit to Operate was granted and has not expired in accordance with these rules, the permit processing fee shall be the amount set forth in the Summary Permit Fee Rates tables. The only exceptions to this fee shall be:

    (4) Fee for Evaluation of Applications for Emission Reductions
    Every applicant who files an application for effecting emission reductions, banking emissions, obtaining emission reduction credit certificates, or registering emission reduction credits, as described in paragraph (a)(2) of this rule shall, at the time of filing, pay a processing fee in accordance with Schedule I in the Summary Permit Fee Rates tables. Additionally, the applicant shall pay a fee of $131.00 for publication of public notice if required by Rule 1310(c).

    (5) Fee Waiver for Equipment Destroyed or Relocated due to a "State of Emergency"
    No permit processing fee shall be assessed for any application filed to replace equipment destroyed, or for the relocation of currently permitted equipment residing within a condemned building, as the result of any event declared to be a "state of emergency" by the local, state, or federal authorities.

    (6) Fee for Serial Number Change of Similar Equipment
    Upon surrender of a Permit to Operate and demonstration to the satisfaction of the Executive Officer that a similar equipment, except for serial number, will be provided for equipment, a Permit to Operate will be reissued bearing the new serial number upon payment of a fee of $109.20.

(d) Annual Operating Permit Renewal Fee

    (1) Renewal of Permit to Operate
    All Permits to Operate (including temporary Permits to Operate pursuant to Rule 202) for equipment on the same premises shall be renewed on the annual renewal date set by the Executive Officer. A Permit to Operate is renewable if the permit is valid according to the District's Rules and Regulations and has not been voided or revoked and if the annual operating permit fee is paid within the time and upon the notification specified in paragraph (d)(8) of this rule.

    (2) The annual operating permit renewal fee shall be assessed in accordance with the following schedules:

    EQUIPMENT/PROCESS SCHEDULES

    ANNUAL OPERATING PERMIT RENEWAL FEE

    Equipment/Processes appearing in Tables IA and IB as Schedule A1

    $89.40

    Equipment/Processes appearing in Tables IA and IB as Schedules A, B, and B1

    (excluding Rule 461 liquid fuel dispensing nozzles)

    $179.10

    Equipment/Processes appearing in Tables IA and IB as Schedules C and D

    $641.50

    Equipment/Processes appearing in Tables IA and IB as Schedules E, F, G, and H

    $1,540.30

    Rule 461 liquid fuel dispensing nozzle

    $36.00 per nozzle

    A facility subject to Rule 461 – Gasoline Transfer and Dispensing shall be assessed a compliance fee as part of the annual operating permit renewal fee for each liquid fuel dispensing nozzle in gasoline dispensing service. The per-nozzle fee shall be as follows:

    FY 99-2000

    FY 2000-2001 and thereafter

    $12.20 per nozzle

    $24.40 per nozzle

    A source shall be assessed one annual operating permit renewal fee for permits subject to Rule 461, based on the number of liquid fuel dispensing nozzles, regardless of the number of such permits the source currently has in its possession.

    (3) Credit for Solar Energy Equipment

    Any permittee required to pay an annual operating permit renewal fee shall receive an annual fee credit for any solar energy equipment installed at the site where the equipment under permit is located.

    (4) Renewal of Temporary Permit to Operate New Equipment
    A Permit to Construct, which has not expired or has not been canceled or voided, will be considered a temporary Permit to Operate on the date the applicant completes final construction and commences operation, pursuant to subdivision (a) of Rule 202. For the purposes of this paragraph, the date specified as the estimated completion date on the application for Permit to Construct will be considered the date of commencement of operation, unless the applicant notifies the District in writing that operation will commence on another date, or unless the equipment already has been placed in operation. Such temporary Permit to Operate shall be valid for the period of time between commencement of operation and the applicant's next annual renewal date following commencement of operation and shall be subject to a prorated amount of the annual operating permit renewal fee prescribed in paragraph (d)(2). The proration shall be based on the time remaining to the next annual renewal date. On that next annual renewal date, and each year thereafter, the annual operating permit renewal fee for the temporary Permit to Operate shall be due in the amount prescribed in paragraph (d)(2).

    (5) Renewal of Temporary Permit to Operate Existing Equipment
    In the case of equipment operating under a temporary Permit to Operate issued pursuant to subdivision (c) of Rule 202, where a Permit to Construct was not issued, the company is immediately subject to a prorated amount of the annual operating permit renewal fee prescribed in paragraph (d)(2) following the submission of the completed application for Permit to Operate. The proration shall be based on the time remaining to the next annual renewal date. On that next annual renewal date, and each year thereafter, the annual operating permit renewal fee shall be due in the amount prescribed in paragraph (d)(2). If no annual renewal date has been established, the Executive Officer shall set one upon receipt of the application.

    (6) If, for any reason, the Executive Officer determines it is necessary to change the annual renewal date, all annual operating permit renewal fees shall be prorated according to the new annual renewal date.

    (7) The same annual renewal date shall apply from one change of operator to another.

    (8) Notice of Amount Due and Nonpayment Penalties
    At least thirty (30) days before the annual renewal date, the owner/operator of equipment under permit will be notified by mail of the amount to be paid and the due date. If such notice is not received at least thirty (30) days before the annual renewal date, the owner/operator of equipment under permit shall notify the District on or before the permit renewal date that said notice was not received. The annual operating permit renewal fee for each permit shall be in the amount described in paragraph (d)(2). If the annual operating permit renewal fee is not paid within thirty (30) days after the due date, the permit will expire and no longer be valid. In such a case, the owner/operator will be notified by mail of the expiration and the consequences of operating equipment without a valid permit, as required by Rule 203 (Permit to Operate). For the purpose of this paragraph, the fee payment will be considered to be received by the District if it is postmarked by the United States Postal Service on or before the expiration date stated on the billing notice. If the expiration date falls on a Saturday, Sunday, or a state holiday, the fee payment may be postmarked on the next business day following the Saturday, Sunday, or state holiday with the same effect as if it had been postmarked on the expiration date.

    (9) Any person holding permits to operate for two or more emission controls applicable to the same equipment who establishes that any of the emission controls is redundant, i.e., not necessary to assure compliance with all applicable legal requirements, shall not be required to pay annual operating permit renewal fees under subdivision (d) for the redundant equipment. The Executive Officer may reinstate the obligation to pay such fees at any time upon determination that operating the control is or has become necessary to assure compliance with any applicable legal requirements.

(e) Annual Operating Permit Emissions Fee

    (1) In addition to the annual operating permit renewal fee, the owner/operator of all equipment operating under permit shall pay an annual operating permit emissions fee based on the total weight of emissions of each of the contaminants specified in Table III from all equipment used by the operator at all locations, including total weight of emissions of each of the contaminants specified in Table III resulting from all products which continue to passively emit air contaminants after they are manufactured, or processed by such equipment, with the exception of such product that is shipped or sold out of the District so long as the manufacturer submits records which will allow for the determination of emissions within the District from such products.

    (2) Emissions from equipment not requiring a written permit pursuant to Regulation II shall be reported but not incur a fee for emissions so long as the owner/operator keeps separate records which allow the determination of emissions from such non-permitted equipment.

    (3) An owner/operator shall not pay a fee for emissions from the use of Clean Air Solvents issued a valid Certificate from the District so long as the facility submits separate records which allow the determination of annual emissions, usage, and identification of such products. A copy of the Clean Air Solvent certificate issued to the manufacturer or distributor shall be submitted with the separate records.

    (4) Emission Fee Thresholds
    Each facility shall be assessed a fee, as prescribed in Table III, for every ton per year (TPY) of emissions greater than or equal to the threshold amount of the contaminant(s) listed below:



    Air contaminant(s)

    Annual emissions threshold (TPY)

    Gaseous sulfur compounds

    (expressed as sulfur dioxide)

    >4 TPY

    Total organic gases

    (excluding methane, specific organic gases, and contaminants listed in Table IV),

    >4 TPY

    Specific organic gases

    >4 TPY

    Oxides of nitrogen

    (expressed as nitrogen dioxide)

    >4 TPY

    Total particulate matter

    (excluding particulate toxic air contaminants listed in Table IV)

    >4 TPY

    Carbon monoxide

    >100 TPY

    (5) Clean Fuels Fee Thresholds
    Each source emitting 250 tons or more per year (>250 TPY) of any of the above referenced contaminants shall pay an annual clean fuels fee as prescribed in Table V (California Health and Safety Code Section 40512).

    (6) Each source emitting a toxic air contaminant or ozone depleter as listed in Table IV shall be assessed an annual operating permit emissions fee as indicated therein.

    (7) Declaration of Total Emissions from Preceding Reporting Period and Unreported or Under-reported Emissions from Prior Reporting Periods

    (8) Notice to Pay and Late Filing Penalties

    (9) Semi-Annual Emissions Fee Payment

    (10) Acceptance of a fee payment does not constitute validation of the emission data.

    (11) Beginning with the reporting period of July 1, 1995 to June 30, 1996, and for subsequent reporting periods, emissions of acetone, ethane, parachlorobenzotrifluoride (PCBTF), and volatile methylated siloxanes (VMS), shall not be subject to the requirements of Rule 301(e).

(f) Certified Permit Copies and Reissued Permits
A request for a certified permit copy shall be made in writing by the permittee after the destruction, loss, or defacement of a permit. A request for a permit to be reissued shall be made in writing by the permittee where there is a name or address change without a change of operator or location. The permittee shall, at the time a written request is submitted, pay the fees to cover the cost of the certified permit copy or reissued permit as follows:

    (1) A fee of $14.10 shall be paid for a certified permit copy.

    (2) A fee of $109.20 shall be paid for a reissued permit.
    No fee shall be assessed to reissue a permit to correct an administrative error by District staff.

(g) Reinstating Expired Applications or Permits

    (1) An application which has been filed but which has expired due to non-payment of fees may be reinstated by submitting a request for reinstatement of the application accompanied by a reinstatement fee and payment in full of the amount of fees due at the time the application expired. The reinstatement fee shall be fifty percent (50%) of the amount of fees due per equipment at the time the application expired, or the following amount, whichever is lower.

    Facility Permit Holders

    $109.20 per equipment

    Other Permit Holders

    $109.20 per equipment

    Payment of all overdue fees and the reinstatement fee shall accompany the request for reinstatement. Such request and payment of such fees shall be made within ninety (90) days of the date of expiration. If the period of expiration has exceeded ninety (90) days or the affected equipment has been altered, a new application shall be required.

    (2) A Permit to Operate which has expired due to nonpayment of fees may be reinstated by submitting a request for reinstatement of the Permit to Operate accompanied by a reinstatement fee and payment in full of the amount of fees due at the time the permit expired, and corresponding fees for each year, plus any applicable penalties pursuant to Rule 301 (e)(8). The reinstatement fee shall be fifty percent (50%) of the amount of fees due per equipment at the time the permit expired, or the following amount, whichever is lower:

    Facility Permit Holders

    $109.20 per equipment

    Other Permit Holders

    $109.20 per equipment

    Such request and payment shall be made within six months of the date of expiration. A Permit to Operate which has expired due to nonpayment of fees shall not be reinstated if the affected equipment has been altered since the expiration of the permit. If the period of expiration has exceeded six months or the affected equipment has been altered, operation of the equipment shall require a new Permit to Operate and the permit application shall be subject to Rule 1313(b).

(h) Reinstating Revoked Permits
If a Permit to Operate is revoked for nonpayment of annual permit fees based on emissions, it may be reinstated upon payment by the permit holder of such overdue fees and accrued late fees in accordance with (e)(8).

(i) Special Processing Fees

    (1) Payment for CEQA Documentation Preparation
    When a determination is made by the Executive Officer that the District is the Lead Agency for a project, pursuant to the California Environmental Quality Act (CEQA), Public Resources Code Section 21000 et seq., state CEQA Guidelines (14 California Code of Regulations section 15000 et seq.) and the District CEQA Guidelines, the project applicant may be required to pay a deposit for the preparation, review, and notice of all necessary CEQA documentation reflecting actual costs. In such a case the applicant shall make a deposit toward total fees according to the following schedule:

    Notice of Exemption

    $640.40

    Negative Declaration

    $2,561.80

    Mitigated Negative Declaration

    $2,561.80

    Environmental Impact Report (EIR)

    $3,415.70

    Supplemental, Subsequent or Addendum to EIR

    $3,415.70

    If the Executive Officer determines that CEQA preparation and review costs are less than the deposit, the District shall refund the difference to the project applicant. If the Executive Officer determines that the District's CEQA preparation and review costs exceed the deposit and in cases where no deposit is required because the District-approved CEQA documentation is provided by the applicant's consultant, the project applicant shall make periodic payment of monies into the CEQA account. The Executive Officer shall determine the amount and timing of such periodic payments, based upon the level of CEQA analysis and the amount of monies needed to offset the actual preparation and review costs.

    (2) Payment for Air Quality Analysis
    When a determination is made by the Executive Officer that an air quality analysis of the emissions from any source is necessary to predict the extent and amount of air quality impact prior to issuance of a permit, the Executive Officer may order air quality simulation modeling by qualified District personnel. Alternatively, the Executive Officer may require (or the owner/operator of the source may elect) that modeling be performed by the owner/operator or an independent consultant.

    Where modeling is performed by the owner/operator or an independent consultant, the Executive Officer may require that the results be verified by qualified District personnel. The owner/operator of the source shall provide to the Executive Officer a copy of the final modeling report including all input data, description of methods, analyses, and results. The owner/operator of the source modeled by District personnel shall pay a fee as specified in Table II to cover the costs of the modeling analysis. A fee, as specified in Table II, shall be charged to offset the cost of District verification of modeling performed by an independent consultant.

    (3) Payment for Health Risk Assessment

    (4) Payment for Public Notice on Significant Projects

    An applicant for a significant project, as defined in Rule 212(c) may be assessed a fee for preparation of the notice required by that rule. The amount of the fee shall be as specified in Table II.

    (5) Payment for Review of Continuous Emissions Monitoring System (CEMS), Fuel Sulfur Monitoring System (FSMS), and Alternative Continuous Emissions Monitoring System (ACEMS)

    (6) Fees for Inter-basin, Inter-district, or Interpollutant Transfers of Emission Reduction Credits
    An applicant for inter-basin, inter-district, or interpollutant transfer of ERCs shall file an application for ERC Change of Title and pay fees as listed in the Summary ERC Processing Rates – Banking, Change of Title, Alteration/Modification Table. Additional fees shall be assessed at a rate of $81.90 per hour for the time spent on review and evaluation of inter-basin, inter-district, and interpollutant transfers of ERCs pursuant to Rule 1309 subdivisions (g) and (h).

    Failure to pay the fees described in this subdivision within thirty (30) days after their due date(s) shall result in expiration of pending applications, and no further applications will be accepted from the applicant until the fees have been paid in full.

(j) Request for Time Extension of Payment Due
Whenever this rule requires fees to be paid by a certain date to avoid expiration, cancellation, or the imposition of an increased fee for late payment, the Executive Officer may, for good cause, grant an extension of time, not to exceed one hundred eighty (180) days, within which the fee payment shall be made. Any request for an extension of time hereunder shall be made in writing and accompanied by a statement of reasons why the extension should be granted.

(k) Adjustment of Fees
The Executive Officer may, upon finding an administrative error by District staff regarding the calculation, imposition, noticing, invoicing, and/or collection of any fee set forth in this rule, rescind, reduce, increase, or modify such fee. Any request for such relief from an administrative error shall be received by the District in writing prior to the expiration date of notification of the amount due, accompanied by a statement of why such relief should be granted.

(l) Refunds

    (1) If an application for a permit is canceled, permit processing fees, less the application cancellation fee, will be refunded:

    (2) The application cancellation fee will be $109.20, or the permit fee set forth in the Summary Permit Fee Rates tables, whichever is less.

    (3) Claims for refund of any fee required by this rule shall be submitted in writing within one (1) year after the fee was paid, or three (3) years in the case of District errors, which shall not include revisions to applicable emissions factors used to calculate annual operating permit emissions fees.

    (4) The cancellation fee shall not apply when the application was filed based on an erroneous District request.

(m) Fee Waivers and Reductions

    (1) On or after January 1, 1996, the District shall, from the date the first application is received, waive annual operating permit renewal fees required by subdivision (d) above for the first two annual renewals of a new manufacturing facility that locates within the South Coast Air Basin and creates five hundred (500) or more new full-time jobs with total facility NOx, SOx, VOC, or PM10 emissions per full-time employee equal to or less than one-half (1/2) of any emission per employee target ratio for the industry class for the Year 2010 stated in the Air Quality Management Plan. After the first two annual renewal fee waiver time periods, the owner/operator shall be liable for all applicable fees set forth in subdivision (d) above.

    (2) A request for a fee waiver or reduction shall be made in the manner prescribed on forms provided by the Executive Officer. The Executive Officer may request supporting documentation of such a request. If the owner/operator, at any time during the applicable fee waiver or reduction time period, does not operate the facility in a manner consistent with all applicable District rules, the Executive Officer may take action to rescind the fee waiver or reduction.

(n) Government Agencies
All applicants and permittees, including federal, state, or local governmental agencies or public districts, shall pay all fees.

(o) RECLAIM Facilities

    (1) For RECLAIM facilities, this subdivision specifies additional conditions and procedures for assessing the following fees:

    (2) All RECLAIM Facility Permit holders shall be subject to this subdivision.

    (3) Unless specifically stated, all RECLAIM Facility Permit holders shall be subject to all other provisions of Rule 301 - Permit Fees.

    (4) Facility Permit Fees

    (5) Facility Permit Amendment
    At the time of filing an application for an addition, alteration or modification to a Facility Permit that requires an engineering evaluation or causes a change in emissions, a Facility Permit Amendment Fee shall be paid. Such fee shall be equal to the sum of applicable fees assessed for each affected equipment as specified in the Summary Permit Fee Rates tables.

    (6) Change of Operating Condition
    At the time of filing an application for a Change of Operating Conditions that requires engineering evaluation or causes a change in emissions, a Change of Condition Fee shall be paid. Such fee shall be equal to the sum of fees assessed for each equipment subject to the change of condition as specified in the Summary Permit Fee Rates - Permit Processing, Change of Conditions, Alteration/Modification table and in the Summary ERC Processing Rates – Banking, Change of Title, Alteration/Modification table.

    (7) Fee for Change of Operator
    The Permit Processing Fee for a change of operator of a RECLAIM facility permit shall be determined by the number of equipment items listed in the Facility Permit, corresponding to the Number of Equipment in the Table Summary Permit Fee Rates - Change of Operator, Non-Small Business (all Schedules except A1).

    (8) Annual Operating Permit Renewal Fee

    (9) Transaction Registration Fee
    The transferor and transferee of an RTC shall jointly register the transaction with the District pursuant to District Rule 2007 - Trading Requirements. The transferee shall pay a Transaction Registration Fee of $53.40 at the time the transaction is registered with the District.

    (10) RECLAIM Pollutant Emission Fee
    At the end of the time period of July 1 through June 30, RECLAIM facilities shall pay a RECLAIM Pollutant Emission Fee based on the facilities’ total certified RECLAIM pollutant emissions. For facilities emitting ten (10) tons per year or more of any contaminant the previous year, the Facility Permit holders shall pay a semiannual installment equal to one half (1/2) of the total estimated fee with final balance due at the end of the period of July 1 through June 30.

    (11) Certified Permits Copies
    A request for a certified copy of a Facility Permit shall be made in writing by the permittee. The permittee shall, at the time the written request is submitted, pay $14.10 for the first page and $1.00 for each additional page in the Facility Permit.

    (12) Reissued Permits
    A request for a reissued Facility Permit shall be made in writing by the permittee where there is a name or address change without a change of operator or location, or for an administrative change in permit description, which do not require any engineering evaluation, and do not cause a change in emissions. The permittee shall, at the time the written request is submitted, pay $109.20 for the first page plus $1.00 for each additional page in the facility permit.

    (13) Breakdown Emission Report Evaluation Fee
    The Facility Permit Holder, submitting a Breakdown Emission Report to seek exclusion of excess emissions from the annual allocations pursuant to Rule 2004 - Requirements, shall pay fees for the evaluation of a Breakdown Emission Report. The Facility Permit Holder shall pay a filing fee of $81.90 at the time of filing of a Breakdown Emission Report, and shall be assessed an evaluation fee at the rate of $81.90 per hour.

    (14) Breakdown Emission Fee
    At the end of the time period from July 1 through June 30, the Facility Permit holder shall pay a Breakdown Emission Fee for excess emissions determined pursuant to District Rule 2004 - Requirements. The Facility Permit Holder shall include excess emissions to the total certified RECLAIM emissions to determine the appropriate RECLAIM Pollutant Emission Fee.

    (15) Mitigation of Non-Tradeable Allocation Credits
    Upon submitting a request to activate non-tradeable allocation credits pursuant to District Rule 2002(h), the RECLAIM Facility Permit Holder shall pay a mitigation fee of $5,466.00 per ton of credits requested plus a non-refundable $54.50 processing fee.

    (16) Evaluation Fee to Increase an Annual Allocation to a Level Greater than a Facility’s Starting Allocation Plus Non-Tradable Credits
    The Facility Permit Holder submitting an application to increase an annual Allocation to a level greater than the facility’s starting allocation plus non-tradable credits pursuant to Rule 2005 - New Source Review shall pay fees for the evaluation of the required demonstration specified in Rule 2005(c)(3). The Facility Permit Holder shall pay an evaluation fee at the rate of $81.90 per hour.

(p) Title V Facilities

    (1) The requirements of this subdivision apply only to facilities that are subject to the requirements of Regulation XXX - Title V Permits.

    (2) All Title V facilities shall be subject to all other provisions of Rule 301 - Permit Fees, except as provided for in this subdivision.

    (3) Permit Processing Fees for Existing Facilities with Existing District Permits Applying for an Initial Title V Facility Permit

    (4) The permit processing fee for a new facility required to obtain a Title V facility permit to construct shall be the sum of all the applicable fees in subdivisions (c) and (i) for all equipment at the facility.

    (5) The permit processing fee for a facility required to obtain a Title V facility permit because of a modification, pursuant to paragraph (c)(2) of Rule 3001, shall be those specified in paragraph (p)(3) plus the sum of all the applicable fees in subdivisions (c) and (i) for all new and modified equipment at the facility.

    (6) Notwithstanding paragraphs (o)(5), (o)(6), (o)(9), and (q)(3), and except as provided in paragraphs (o)(7), (o)(12), (q)(3), (q)(5) and (q)(8), the permit processing fee for an administrative permit revision shall be the Schedule A fee of $310.20.

    (7) The permit processing fees for a minor permit revision, de minimis significant permit revision or a significant permit revision shall be $109.20 plus the applicable fee in paragraphs (o)(5), (o)(6), (q)(3), and (q)(4).

    (8) The fees for renewal of a Title V Facility Permit, at the end of the term specified on the permit, shall be an initial processing fee of $573.30 to be paid when the application is submitted; and a final fee of $81.90 per hour for time spent on the application in excess of 5 hours, due upon notification by the District of the amount due when the permit is issued.

    (9) The holder of, or applicant for, a Title V permit shall, upon notification by the District of the amount due, pay the costs incurred by the District to issue a public notice.

    (10) The holder of, or applicant for, a Title V permit shall, upon notification by the District of the amount due, pay fees of $1,639.70 plus $546.40 per hour for a public hearing held on a permit action.

    (11) Application Cancellation
    If a Title V permit application is canceled, the applicant shall pay, upon notification of the amount due, a final fee in accordance with this subdivision. The District shall refund the initial fee only if evaluation of the application has not been initiated.

    (12) Notice of Amount Due and Nonpayment Penalties
    For fees due upon notification, such notice may be given by personal service or by deposit, postpaid, in the United States mail and shall be due thirty (30) days from the date of personal service or mailing. For the purpose of this paragraph, the fee payment will be considered to be received by the District if it is postmarked by the United States Postal Service on or before the expiration date stated on the billing notice. If the expiration date falls on a Saturday, Sunday, or a state holiday, the fee payment may be postmarked on the next business day following the Saturday, Sunday, or the state holiday with the same effect as if it had been postmarked on the expiration date. Nonpayment of the fee within this period of time will result in permit expiration or revocation of the subject permit(s) in accordance with subdivision (f) of Rule 3002. No further applications will be accepted from the applicant until such time as overdue permit processing fees have been fully paid.

(q) All Facility Permit Holders

    (1) The requirements of this subdivision apply to all non-RECLAIM holders of a Facility Permit.

    (2) All non-RECLAIM Facility Permit holders or applicants shall be subject to all other provisions of Rule 301 - Permit Fees, except as provided for in this subdivision.

    (3) Facility Permit Revision
    Except as provided in paragraphs (p)(7) and (p)(8), the permit processing fee for an addition, alteration or revision to a Facility Permit that requires engineering evaluation or causes a change in emissions shall be the sum of applicable fees assessed for each affected equipment as specified in subdivisions (c) and (i).

    (4) Change of Operating Condition
    The permit processing fee for a Change of Operating Condition that requires engineering evaluation or causes a change in emissions shall be the sum of fees assessed for each equipment or process subject to the change of condition as specified in subdivisions (c) and (i).

    (5) Fee for Change of Operator
    The permit processing fee for a change of operator of a facility permit shall be determined by the number of processes listed in the Facility Permit, corresponding to the number of Equipment/processes in the Table "Summary Permit Rates - Change of Operator", Non-Small Business, All Schedules except A1.

    (6) Annual Operating Permit Renewal Fee

    (7) Certified Permit Copies
    A request for a certified copy of a Facility Permit shall be made in writing by the permittee. The permittee shall, at the time a written request is submitted, pay $14.10 for the first page and $1.00 for each additional page in the facility permit.

    (8) Reissued Permits
    A request for a reissued Facility Permit shall be made in writing by the permittee where there is a name or address change without a change of operator or location, or for an administrative change in permit description or a change in permit conditions to reflect actual operating conditions, which do not require any engineering evaluation, and do not cause a change in emissions. The permittee shall, at the time a written request is submitted, pay $109.20 for the first page plus $1.00 for each additional page in the Facility Permit.

(r) Asbestos Fees
Any person who is required by District Rule 1403 - Asbestos Emissions from Demolition/Renovation Activities to submit a written notice of intention to demolish or renovate shall pay at the time of delivery of notification, the Asbestos and Lead Fees specified in Table VI of this rule. Fees are per notification and multiple fees may apply. No notification shall be considered received pursuant to Rule 1403, unless it is accompanied by the required payment.

(s) Lead Abatement Notification Fees
A person who is required by a federal or District rule to submit written notice of intent to abate lead shall, at the time of delivery of notification, pay the appropriate renovation and abatement fee specified in Table VI of this rule. Fees are per notification and multiple fees may apply. No notification shall be considered received unless it is accompanied by the required payment.

(t) NESHAP Evaluation Fee

    (1) At the time of filing an application for a Change of Operating Conditions submitted solely to comply with the requirements of a NESHAP, a NESHAP Evaluation Fee shall be paid. The fee shall be $170.70. Additional fees shall be assessed at a rate of $81.90 per hour for time spent in the evaluation in excess of two (2) hours, to a maximum total fee not to exceed the applicable Change of Conditions Fees listed for each affected piece of equipment as specified in the Summary Permit Fee Rates - Permit Processing, Change of Conditions, Alteration/Modification table and in the Summary ERC Processing Rates – Banking, Change of Title, Alteration/Modification table.

    (2) Payment of all applicable fees shall be due in thirty (30) days from the date of personal service or mailing of the notification of the amount due. Non-payment of the fees within this time period will result in expiration of the permit. For the purpose of this paragraph, the fee payment will be considered to be received by the District if it is postmarked by the United States Postal Service on or before the expiration date stated on the billing notice. If the expiration date falls on a Saturday, Sunday, or a state holiday, the fee payment may be postmarked on the business day following the Saturday, Sunday, or the state holiday, with the same effect as if it had been postmarked on the expiration date. No further applications will be accepted until such time as all overdue fees have been fully paid.

(u) Fees for Certification of Clean Air Solvents
Persons applying for Clean Air Solvent certification shall pay the following fee for each product to be certified:

Gas Chromatograph/Mass
Spectrometry Analysis
$218.50 for five or fewer compounds

$21.60 for each additional compounds
Density measurement $81.90
Time and material $81.90 per person per hour or prorated portion thereof
Clean Air Solvent Certificate $104.20

At the time of filing for a Clean Air Solvent certificate, the applicant shall submit a fee of $521.20 for each product to be tested. Adjustments, including refunds or additional billings, shall be made to the submitted fee as necessary. A Clean Air Solvent Certificate shall be valid for five (5) years from the date of issuance and shall be renewed upon the determination of the Executive Officer that that the product(s) containing a Clean Air Solvent continue(s) to meet Clean Air Solvent criteria, and has not been reformulated. After five (5) years from the date of Clean Air Solvent certificate issuance, a renewal fee of $104.20 shall be charged for the reissuance of the Clean Air Solvent Certificate to applicants whose products continue to meet Clean Air Solvent criteria.

(v) All Facility Registration Holders

    (1) The requirements of this subdivision apply to all holders of a Facility Registration.

    (2) Unless specifically stated otherwise, all Facility Registration holders shall be subject to all other provisions of Rule 301 - Permit Fees.

    (3) Existing facilities entering the Facility Registration Program shall pay no fee if no changes are initiated by actions of the permittee to the existing permit terms or conditions or to the draft Facility Registration prepared by the District.

    (4) Duplicate of Facility Registrations
    A request for a duplicate of a Facility Registration shall be made in writing by the permittee. The permittee shall, at the time a written request is submitted, pay $14.10 for the first page and $1.00 for each additional page in the Facility Registration.

    (5) Reissued Facility Registrations
    A request for a reissued Facility Registration shall be made in writing by the permittee where there is a name or address change without a change of operator or location, or for an administrative change in permit description or a change in permit conditions to reflect actual operating conditions, which do not require any engineering evaluation, and do not cause a change in emissions. The permittee shall, at the time a written request is submitted, pay $109.20 for the first equipment listed in the Facility Registration plus $1.00 for each additional equipment listed in the Facility Registration.

(w) Service Charge for Returned Check
Any person who submits a check to the District on insufficient funds or on instructions to stop payment on the check, absent an overcharge or other legal entitlement to withhold payment, shall be subject to a $26.00 service charge.

(x) Fees for Non-permitted Emission Sources Subject to Rule 222

    (1) Initial filing fee
    Upon adoption of Rule 222, at the time specified in Rule 222 each owner/operator of an emission source subject to Rule 222 shall pay to the District a non-refundable filing and processing fee of $100 per source. When an emission source is built, erected, installed, or replaced without the owner/operator filing a Rule 222 application, the processing fee assessed shall be 150 percent (150%) of the initial filing fee.

    (2) Change of operator fee
    A fee of $100 shall be charged to a person applying for a Change of Operator for a source subject to Rule 222.

    (3) Annual renewal fee
    On the annual renewal date set by the Executive Officer, the owner/operator of a source subject to Rule 222 shall pay a renewal fee of $100 for each source subject to that rule.

(y) Optional Express Permit Processing Fee
Fees for requested express processing of permit applications will be based upon processing time billed at the increased rate for staff overtime which is equal to half of $81.90 per hour. The established permit application fees found in the applicable permit fee tables and provisions of Rule 301(c) shall be paid at the time of filing with the additional overtime fee billed following permit issuance. Fees are due at the time specified in the bill which will allow a reasonable time for payment. This proposal is contingent upon the ability of the District to implement the necessary policies and procedures and the availability of qualified staff for overtime permit processing.

(z) Enforcement Inspection Fees for Statewide Equipment
An enforcement inspection fee of $75.00 shall be assessed one time per calendar year for each registered portable engine or equipment unit inspected, unless for reasonable cause the District performs an inspection leading to determination of non-compliance with this regulation, or any applicable state or federal requirements. In this instance, the fee shall be $75.00 per portable engine or equipment unit for each inspection necessary for the determination and ultimate resolution of the violation. If no fee payment is received within 30 days of written notice, a fee penalty of $45.00 per portable engine or equipment unit per inspection shall be assessed. Failure to pay within 90 days of written notice may result in cancellation of registration. Canceled registration may be reinstated by applying for registration through the California Air Resources Board and payment of all fees due, including penalty fees, to the California Air Resources Board and the District, as appropriate.

SUMMARY PERMIT FEE RATES -

PERMIT PROCESSING, CHANGE OF CONDITIONS, ALTERATION/MODIFICATION

Schedule

Permit Processing Fee

Change of Condition

Alteration/

Modification

A

$310.20 $262.20 $310.20

A1

$179.10 $179.10 $179.10

B

$788.10 $620.80 $620.80

B1

$2,028.90 $1,074.40 $1,265.80

C

$2,028.90 $1,074.40 $1,265.80

D

$4,416.60 $1,837.50 $2,267.10

E

$8,712.90 $2,697.90 $3,557.10

F

$15,396.90 $3,938.80 $4,701.80

G

$26,378.50 $6,683.80 $7,996.90

H

$33,540.20 $8,474.50 $10,145.10

SUMMARY ERC PROCESSING RATES - BANKING, CHANGE OF TITLE, ALTERATION/MODIFICATION

Schedule

Banking Application

Change of Title

Alteration/

Modification

I

$2,028.90 $358.40 $358.40

SUMMARY PERMIT FEE RATES -

CHANGE OF OPERATOR

Small Business

Non-Small Business

Number of Equipment

Schedule A1 Only

All Schedules
except A1

Schedule A1 Only

All Schedules
except A1

1

$109.20

$109.20

$179.10

$273.10

2 - 5

$143.30

$218.10

$358.40

$546.40

6 – 9

$297.40

$442.70

$726.20

$1,107.20

10 – 15

$434.90

$663.20

$1,088.90

$1,660.20

16 – 20

$580.80

$885.60

$1,452.50

$2,214.40

21 and over

$725.60

$1,105.90

$1,815.40

$2,767.50

TABLE IA - PERMIT FEE RATES FOR CONTROL EQUIPMENT
Equipment/Process

Schedule

Activated Carbon Adsorber, Venting Single Source (s.s.=single source)

B

Activated Carbon Adsorber, Venting Multiple Source (m.s.=multiple sources)

C

Activated Carbon Adsorber, Other

D

Activated Carbon Adsorber, Drum Venting Toxic Source (t.s.)

C

Activated Carbon Adsorber, with regeneration

E

Afterburner (<1 MMBTU/hr,venting s.s.)

B

Afterburner (< =1 MMBTU/hr,venting m.s.)

C

Afterburner, Catalytic for Bakery Oven

C

Afterburner, Direct Flame

D

Afterburner, Hot Rock Bed Type

D

Afterburner, Catalytic

D

Air Filter, Custom

C

Amine (or DEA) Regeneration Unit [Including, but not limited to, all or part of the following: Accumulators, Columns, Condenesers, Drums, Heat Exchangers, Knock Out Pots, Pots, Pumps, Regenerators, Scrubbers, Settling Tanks, Sumps, Tanks, Towers, Vessels.]

D

Amine Treating Unit [Including, but not limited to, all or part of the following: Accumulators, Columns, Condenesers, Drums, Heat Exchangers, Knock Out Pots, Pots, Pumps, Regenerators, Scrubbers, Settling Tanks, Sumps, Tanks, Towers, Vessels.]

D

Baghouse, Ambient (>500 FT2)

C

Baghouse, Ambient (<=100 FT2)

A

Baghouse, Ambient (>100-500 FT2)

B

Baghouse, Hot

D

Biofilter (<= 100 cfm)

B

Biofilter (> 100 cfm)

C

Boiler as Afterburner

D

CO Boiler

F

Condenser

C

Cyclone

B

Dry Filter (>500 FT2)

C

Dry Filter (<=100 FT2)

A

Dry Filter (>100-500 FT2)

B

Electrostatic Precipitator, Restaurant

B

Electrostatic Precipitator, Asphalt Batch Equipment

C

Electrostatic Precipitator, Extruder

B

Electrostatic Precipitator, < 3000 CFM

B

Electrostatic Precipitator, >= 3000 CFM

D

Electrostatic Precipitator for Fluid Catalytic Cracking Unit (FCCU)

H

Ethylene Oxide Sterilization, Control, Hospital

B

Equipment/Process

Schedule

Flare, Enclosed Landfill/Digester Gas

E

Flare, Open, Landfill/Digester Gas

C

Flare, Other

C

Flare, Portable

B

Flare System, Refinery [Including, but not limited to, all or part of the following: Flare, Compressors, Drums, Knock Out Pots, Pots, Vessels]

F

Flue Gas Desulfurization [Including, but not limited to, all or part of the following: Accumulators, Columns, Condensers, Drums, Heat Exchangers, Knock Out Pots, Pots, Pumps, Regenerators, Scrubbers, Settling Tanks, Sumps, Tanks, Towers, Vessels]

D

Gas Absorption Unit [Including, but not limited to, all or part of the following: Accumulators, Columns, Condensers, Drums, Heat Exchangers, Knock Out Pots, Pots, Pumps, Regenerators, Scrubbers, Settling Tanks, Sumps, Tanks, Towers, Vessels]

D

Gas Scrubbing System [ Including, but not limited to, all or part of the following: Accumulators, Columns, Condensers, Drums, Heat Exchangers, Knock Out Pots, Pots, Pumps, Regenerators, Scrubbers, Settling Tanks, Sumps, Tanks, Towers, Vessels]

F

Incinerator, Afterburner

D

Mesh pads, for toxics gas stream

C

Mesh pads, for other acid mists

B

Mist Control

B

Mist Eliminator with HEPA

C

Negative Air Machine/HEPA, Asbestos, Lead

A

Abatement System/HEPA, Asbestos, Lead

B

Dust Collector/HEPA, other Rule 1401 toxics

C

Non-Selective Catalytic Reduction

B

Odor Control Unit

D

Relief and Blowdown System [ Including, but not limited to, all or part of the following: Compressors, Drums, Knock Out Pots, Pots,]

D

Scrubber, Biofiltration

C

Scrubber Controlling NOx venting

D

Scrubber Controlling SOx venting

D

Scrubber Controlling HCL or NH3 venting s.s.

B

Scrubber Controlling HCL or NH3 venting m.s.

C

Scrubber, NOx, multistage

D

Scrubber, NOx, single stage

C

Scrubber, Odor, <5000 cfm

C

Scrubber, Other venting s.s.

B

Scrubber, Other venting m.s.

C

Scrubber, Other Chemical venting s.s.

B

Scrubber, Other Chemical venting m.s.

D

Scrubber, Particulates venting s.s.

B

Scrubber, Particulates venting m.s.

C

Scrubber, Particulates venting t.s.

D

Scrubber, Restaurant

B

Scrubber, Toxics venting

D

Scrubber, Venturi venting s.s.

B

Equipment/Process

Schedule

Scrubber, Venturi venting m.s.

C

Scrubber, Venturi venting t.s.

C

Scrubber, Water (no packing)

B

Selective Catalytic Reduction (SCR)

C

Settling Chamber

B

Ship Hold Hatch Cover

A

Slop Oil Recovery System

D

Sour Water Oxidizer Unit [ Including, but not limited to, all or part of the following: Accumulators, Columns, Drums, Knock Out Pots, Tanks, Vessels, ]

D

Sour Water Stripper [ Including, but not limited to, all or part of the following: Condensers, Coolers, Drums, Sumps, Vessels, ]

D

Sparger

B

Spent Acid Storage & Treating Facility [ Including, but not limited to, all or part of the following: Accumulators, Clarifier, Columns, Compressors, Condensers, Drums, Filters, Filter Presses, Heat Exchangers, Knock Out Pots, Pits, Pots, Pumps, Reactors, Regenerators, Scrubbers, Settling Tanks, Sumps, Tanks, Towers, Vessels, ]

E

Spent Carbon Regeneration System

D

Spent Caustic Separation System [ Including, but not limited to, all or part of the following: Process Tanks, Separators, Tanks, ]

D

Spray Booth/Enclosure, Other

B

Spray Booth/Enclosure, Powder Coating System with single or multiple APC for particulates

B

Spray Booth, Metallizing

C

Spray Booth with Carbon Adsorber (non-regenerative)

C

Spray Booths (multiple) with Carbon Adsorber (non-regenerative)

D

Spray Booth(s) with Carbon Adsorber (regenerative)

E

Spray Booth(s) (1 to 5) with Afterburner

D

Spray Booths (>5) with Afterburner

E

Spray Booth, Automotive, with Multiple VOC Control Equipment

C

Spray Booth with Multiple VOC Control

D

Spray Booths (multiple) with Multiple VOC Control Equipment

E

Storm Water Handling & Treating System [Including, but not limited to, all or part of the following: Air Floatation Units, Floatation Units, Filter Presses, Clarifiers, Settling Tanks, Waste Water Separators, Tanks]

E

Sulfur Recovery Equipment [Including, but not limited to, all or part of the following: Accumulators, Clarifier, Columns, Compressors, Condensers, Drums, Filters, Filter Presses, Heat Exchangers, Knock Out Pots, Pits, Pots, Pumps, Reactors, Regenerators, Scrubbers, Settling Tanks, Sumps, Tanks, Towers, Vessels]

H

Tail Gas Incineration

D

Tail Gas Unit [Including, but not limited to, all or part of the following: Absorbers, Condensers, Coolers, Drums, Heat Exchangers, Knock Out Pots, Reactors, Tanks, Vessels]

H

Tank Degassing Unit

D

Ultraviolet Oxidation

D

Vapor Balance System [Including, but not limited to, all or part of the following: Absorbers, Compressors, Condensers, Knock Out Pots, Pumps, Saturators]

B

Vapor Recovery, Serving Crude Oil Production [Including, but not limited to, all or part of the following: Absorbers, Compressors, Condensers, Knock Out Pots, Pumps, Saturators]

D

Vapor Recovery, Serving Refinery Unit [Including, but not limited to, all or part of the following: Absorbers, Compressors, Condensers, Knock Out Pots, Pumps, Saturators]

E

Waste Gas Incineration Unit

E

TABLE IB - PERMIT FEE RATES FOR BASIC EQUIPMENT
Equipment/Process

Schedule

Abatement System, Asbestos, Lead

B

Abrasive Blasting (Cabinet, Mach., Room)

B

Abrasive Blasting (Open)

A

Absorption Chillers (Gas-Fired), < 5 MM Btu/hr

B

Absorption Chillers (Gas-Fired), >= 5 MM Btu/hr

C

Acetylene Purification System

Including, but not limited to, all or part of the following: Absorbers, Accumulators, Columns, Compressors, Condensers, Drums, Heat Exchangers, Knock Out Pots, Pots, Pumps, Reactors, Regenerators, Scrubbers, Settling Tanks, Sumps, Tanks, Towers, Vessels

C

Acid Treating

Including, but not limited to, all or part of the following: Absorbers, Accumulators, Columns, Compressors, Condensers, Drums, Heat Exchangers, Knock Out Pots, Pots, Pumps, Reactors, Regenerators, Scrubbers, Settling Tanks, Sumps, Tanks, Towers, Vessels

E

Adhesives Organic Additions

Including, but not limited to, all or part of the following: Reactors, Mixers, Process Tanks, Vessels

C

Adsorption Chillers (Gas-Fired), < 5 MM Btu/hr

B

Adsorption Chillers (Gas-Fired), >= 5 MM Btu/hr

C

Adsorption, Other

B

Aeration Potable Water

C

Aggregate, Tank Truck Loading/Conveying

Including, but not limited to, all or part of the following: Bins, Bucket Elevators, Conveyors, Feeders, Hoppers, Weigh Stations

B

Aggregate Production, with Dryer

Including, but not limited to, all or part of the following: Bins, Bucket Elevators, Conveyors, Dryers, Feeders, Hoppers, Crushers, Cyclones, Log Washers, Mixers, Screens, Vibrating Grizzlies, Weigh Stations

E

Equipment/Process

Schedule

Aggregate Production/Crushing (<5000 tpd)

Including, but not limited to, all or part of the following: Bins, Bucket Elevators, Conveyors, Feeders, Hoppers, Crushers, Cyclones, Log Washers, Mixers, Screens, Vibrating Grizzlies, Weigh Stations

C

Aggregate Production/Crushing (>=5000)

Including, but not limited to, all or part of the following: Bins, Bucket Elevators, Conveyors, Feeders, Hoppers, Crushers, Cyclones, Log Washers, Mixers, Screens, Vibrating Grizzlies, Weigh Stations

D

Aggregate Screening

Including, but not limited to, all or part of the following: Bins, Bucket Elevators, Conveyors, Feeders, Hoppers, Cyclones, Screens, Weigh Stations

C

Air Strippers

C

Aircraft Fueling Facility

Including, but not limited to, all or part of the following: Storage Tanks, Dispensing Nozzles

D

Alkylation Unit

Including, but not limited to, all or part of the following: Absorbers, Accumulators, Columns, Compressors, Condensers, Drums, Heat Exchangers, Knock Out Pots, Pots, Pumps, Reactors, Regenerators, Scrubbers, Settling Tanks, Sumps, Tanks, Towers, Vessels

E

Ammonia Mfg.

Including, but not limited to, all or part of the following: Absorbers, Accumulators, Columns, Compressors, Condensers, Coolers, Drums, Ejectors, Heat Exchangers, Knock Out Pots, Pots, Pumps, Reactors, Regenerators, Scrubbers, Settling Tanks, Sumps, Tanks, Towers, Vessels

C

Ammonia Vaporization Unit

Including, but not limited to, all or part of the following: Absorbers, Accumulators, Columns, Compressors, Condensers, Coolers, Drums, Ejectors, Heat Exchangers, Knock Out Pots, Pots, Pumps, Reactors, Regenerators, Scrubbers, Settling Tanks, Sumps, Tanks, Towers, Vessels

C

Equipment/Process

Schedule

Animal Feed Processing, Conveying

Including, but not limited to, all or part of the following: Conveyors, Bins, Hoppers, Bucket Elevators

B

Animal Feed Processing, Other

Including, but not limited to, all or part of the following: Conveyors, Bins, Hoppers, Bucket Elevators, Mixers, Feeders, Grinders

C

Anodizing (sulfuric, phosphoric)

B

Aqueous Ammonia Transfer & Storage

C

Aromatics Recovery Unit

Including, but not limited to, all or part of the following: Absorbers, Accumulators, Columns, Compressors, Condensers, Drums, Heat Exchangers, Knock Out Pots, Pots, Pumps, Reactors, Regenerators, Scrubbers, Settling Tanks, Sumps, Tanks, Towers, Vessels

E

Asphalt Air Blowing

B

Asphalt Blending/Batching

Including, but not limited to, all or part of the following: Bins, Bucket Elevators, Conveyors, Cyclones, Dryers, Feeders, Hoppers, Knock Out Pots, Mixers, Screens, Tanks, Weigh Stations

E

Asphalt Coating

C

Asphalt Day Tanker/Tar Pot

A

Asphalt Refining

Including, but not limited to, all or part of the following: Absorbers, Accumulators, Columns, Compressors, Condensers, Drums, Heat Exchangers, Knock Out Pots, Pots, Pumps, Reactors, Regenerators, Scrubbers, Settling Tanks, Sumps, Tanks, Towers, Vessels

E

Asphalt Roofing Line

Including, but not limited to, all or part of the following: Pumps, Conveyors, Process Tanks, Coater Operations, Cutters

C

Asphalt Roofing Saturator

D

Asphalt-Rubber Spraying

B

Auto Body Shredding

C

Autoclave, Non-sterilizing Type

B

Battery Charging/Manufacturing

Including, but not limited to, all or part of the following: Cutters, Crushers, Separators, Process Tanks, Conveyors

C

Equipment/Process

Schedule

Benzene/Toluene/Xylene Production Equip.

Including, but not limited to, all or part of the following: Absorbers, Accumulators, Columns, Compressors, Condensers, Drums, Heat Exchangers, Knock Out Pots, Pots, Pumps, Reactors, Regenerators, Scrubbers, Settling Tanks, Sumps, Tanks, Towers, Vessels

E

Beryllium Machining and Control

Including, but not limited to, all or part of the following: Machining Operations, Filters, Baghouses

C

Bleach Manufacturing

Including, but not limited to, all or part of the following: Accumulators, Columns, Com-pressors, Condensers, Drums, Heat Exchangers, Knock Out Pots, Pots, Pumps, Tanks, Towers, Vessels

B

Blending, Other

B

Boiler/hot water heater, various locations, diesel/oil fired (<300,000 BTU/hr)

A

Boiler/hot water heater, single facility, portable, diesel/oil fired (<600,000 BTU/hr)

A

Boiler, Landfill/Digester Gas (>10 MMBTU/hr)

F

Boiler, Landfill/Digester Gas (<=10 MMBTU/hr)

B

Boiler, Other Fuel (<5MMBTU/hr)

B

Boiler, Utility (>50MW)

H

Boiler, Other Fuel (5 - 20 MMBTU/hr)

C

Boiler, Other Fuel (> 50 MMBTU/hr)

E

Boiler, Other Fuel (>20-50 MMBTU/hr)

D

Brake Shoes, Grinding, Bonding and Debonding, Deriveter

B

Bulk Chemical Terminal

B

Bulk Loading/Unloading Stn.(< 50,000 GPD)

B

Bulk Loading/Unloading Rack (> 50,000 - 200,000 GPD)

D

Bulk Loading/Unloading Rack (> 200,000 GPD)

E

Bulk Unloading

C

Carpet Processing System

Including, but not limited to, all or part of the following: Process Tanks, Dryers, Carpet Beaters, Carpet Shears,

D

Equipment/Process

Schedule

Catalyst Handling System

Including, but not limited to, all or part of the following: Centrifuge, Bins, Conveyors, Hoppers, Cyclones, Screens, Tanks, Weigh Stations

C

Catalyst Mfg./Calcining

Including, but not limited to, all or part of the following: Bins, Conveyors, Reactors, Mixers, Process Tanks, Kilns

D

Catalyst Storage (Hoppers)

C

Catalytic Reforming Unit

Including, but not limited to, all or part of the following: Absorbers, Accumulators, Columns, Compressors, Condensers, Drums, Fractionators, Heat Exchangers, Knock Out Pots, Pots, Pumps, Reactors, Regenerators, Scrubbers, Settling Tanks, Sumps, Tanks, Towers, Vessels

E

Caustic Treating Unit

Including, but not limited to, all or part of the following: Knock Out Pots, Tanks, Towers, Vessels...

E

Cement Marine Loading & Unloading

Including, but not limited to, all or part of the following: Bins, Conveyors, Bucket Elevators, Hoppers, Loading & Unloading Arms, Weigh Stations

E

Cement Packaging

Including, but not limited to, all or part of the following: Bins, Conveyors, Bucket Elevators, Hoppers, Weigh Stations

C

Cement Truck Loading

C

Charbroiler, Eating Establishment

A

Charbroiler with Integrated Control

B

Charbroiler, Food Manufacturing

C

Chemical Additive Injection System

Including, but not limited to, all or part of the following: Injectors, Compressors, Pumps

C

Chip Dryer

D

Circuit Board Etchers

B

Cleaning, Miscellaneous

B

Coal Bulk Loading

Including, but not limited to, all or part of the following: Bins, Conveyors, Bucket Elevators, Hoppers, Loading Arms, Weigh Stations

E

Equipment/Process

Schedule

Coal Research Pilot / Equip (0-15 MMBTU/hr)

C

Coal Research Pilot / Equip (>15 MMBTU/hr)

D

Coal Tar Treating

Including, but not limited to, all or part of the following: Absorbers, Accumulators, Columns, Compressors, Condensers, Drums, Heat Exchangers, Knock Out Pots, Pots, Pumps, Reactors, Regenerators, Scrubbers, Settling Tanks, Sumps, Tanks, Towers, Vessels

C

Coating & Drying Equipment, Continuous Organic, Web Type

Including, but not limited to, all or part of the following: Coater Operations, Process Tanks, Dryers

C

Coffee Roasting, 100 lb or more capacity

Including, but not limited to, all or part of the following: Bins, Conveyors, Bucket Elevators, Hoppers, Roasters, Coolers

C

Coffee Roasting, 11-49 lb roaster capacity

Including, but not limited to, all or part of the following: Bins, Conveyors, Bucket Elevators, Hoppers, Roasters, Coolers

A

Coffee Roasting, 50-99 lb roaster capacity

Including, but not limited to, all or part of the following: Bins, Conveyors, Bucket Elevators, Hoppers, Roasters, Coolers

B

Coke Handling & Storage Faclity

Including, but not limited to, al or part of the following: Centrifuge, Bins, Conveyors, Clarifier, Hoppers, Cyclones, Screens, Tanks, Weigh Stations

E

Composting, in vessel

Including, but not limited to, all or part of the following: Bins, Conveyors, Hoppers

C

Concrete/Asphalt Crushing

Including, but not limited to, all or part of the following: Bins, Bucket Elevators, Conveyors, Feeders, Hoppers, Crushers, Cyclones, Screens, Vibrating Grizzlies, Weigh Stations

C

Equipment/Process

Schedule

Concrete Batch Equipment

Including, but not limited to, all or part of the following: Bins, Bucket Elevators, Conveyors, Dryers, Feeders, Hoppers, Crushers, Cyclones, Log Washers, Mixers, Screens, Vibrating Grizzlies, Weigh Stations

C

Container Filling, Liquid

B

Conveying, Other

B

Cooling Tower, Petroleum Operations

C

Cooling Tower, Other

B

Core Oven

B

Cotton Ginning System

Including, but not limited to, all or part of the following: Hoppers, Conveyors, Separators, Screens, Classifiers, Mixers

D

Crankcase Oil, Loading and Unloading

C

Crematory

C

Crude Oil, Cracking Catalytic

Including, but not limited to, all or part of the following: Absorbers, Accumulators, Columns, Compressors, Condensers, Drums, Fractionators, Heat Exchangers, Knock Out Pots, Pots, Pumps, Reactors, Regenerators, Scrubbers, Settling Tanks, Sumps, Tanks, Towers, Vessels

G

Crude Oil, Distillation Unit

Including, but not limited to, all or part of the following: Absorbers, Accumulators, Columns, Compressors, Condensers, Drums, Fractionators, Heat Exchangers, Knock Out Pots, Pots, Pumps, Reactors, Regenerators, Scrubbers, Settling Tanks, Sumps, Tanks, Towers, Vessels

E

Crude Oil/Gas/Water Separation System (< 30 BPD)**

Including, but not limited to, all or part of the following: Adsorbers, Oil Water Separators, Oil Gas Water Separators, Pits, Sumps, Tanks, Vessels

B

Crude Oil/Gas/Water Separation System, (>= 30 BPD & < 400 BPD)**

Including, but not limited to, all or part of the following: Adsorbers, Oil Water Separators, Oil Gas Water Separators, Pits, Sumps, Tanks, Vessels

C

Equipment/Process

Schedule

Crude Oil/Gas/Water Separation System, (>= 400 BPD)**

Including, but not limited to, all or part of the following: Adsorbers, Oil Water Separators, Oil Gas Water Separators, Pits, Sumps, Tanks, Vessels

E

Decorating Lehr

C

Decorator

B

Deep-Fat Fryer

C

Dehydration Unit

Including, but not limited to, all or part of the following: Absorbers, Accumulators, Columns, Compressors, Condensers, Drums, Heat Exchangers, Knock Out Pots, Pots, Pumps, Reactors, Regenerators, Scrubbers, Settling Tanks, Sumps, Tanks, Towers, Vessels

C

Degreaser, Cold Solvent Dipping

B

Degreaser, Cold Solvent Spray

C

Degreaser, (>1 lb VOC/day)

B

Degreaser (VOC w/Toxics)

C

Degreaser, (<=1 lb VOC/day)

A

Delayed Coking Unit

Including, but not limited to, all or part of the following: Absorbers, Accumulators, Columns, Compressors, Condensers, Drums, Fractionators, Heat Exchangers, Knock Out Pots, Pots, Pumps, Reactors, Regenerators, Scrubbers, Settling Tanks, Sumps, Tanks, Towers, Vessels

E

Deposition on Ceramics (< 5 pieces)

B

Deposition on Ceramics (5 or more pieces)

C

Desalting Unit

Including, but not limited to, all or part of the following: Mixers, Pumps, Reactors, Settling Tanks, Sumps, Tanks, Vessels

C

Die Casting Equipment

C

Digester Gas Desulfurization System

Including, but not limited to, all or part of the following: Absorbers, Accumulators, Columns, Compressors, Condensers, Drums, Heat Exchangers, Knock Out Pots, Pots, Pumps, Reactors, Regenerators, Scrubbers, Settling Tanks, Tanks, Towers, Vessels

C

Equipment/Process

Schedule

Dip Tank, Coating

B

Dip Tank, (<=3 gal/day)

A

Distillation, Other

Including, but not limited to, all or part of the following: Absorbers, Accumulators, Columns, Compressors, Condensers, Drums, Fractionators, Heat Exchangers, Knock Out Pots, Pots, Pumps, Reactors, Regenerators, Scrubbers, Settling Tanks, Sumps, Tanks, Towers, Vessels

C

Drilling Rig, Crude Oil Prod.

C

Drop Forge

B

Dry Cleaning & Associated Control Equipment

A

Dryer for Organic Material

C

Drying/Laundry

A

Drying, Other

B

Emission Reduction Credits [Rule 301(c)(4)]

I

End Liner, Can

B

Ethylene Oxide Sterilization, Hospital

B

Evaporation, Other

B

Evaporator, toxics

C

Extraction - Benzene

Including, but not limited to, all or part of the following: Absorbers, Accumulators, Columns, Compressors, Condensers, Drums, Heat Exchangers, Knock Out Pots, Pots, Pumps, Reactors, Regenerators, Scrubbers, Settling Tanks, Sumps, Tanks, Towers, Vessels

C

Extruder

B

Extrusion System (Multiple Units)

Including, but not limited to, all or part of the following: Extruders

C

Fatty Acid Mfg.

C

Feathers, Size Classification

A

Feed Handling (combining conveying and loading)

D

Fermentation/Brewing

Including, but not limited to, all or part of the following: Hoppers, Conveyors, Brew Kettles...

C

Equipment/Process

Schedule

Fertilizer, Natural, Packaging/ Processing

Including, but not limited to, all or part of the following: Bins, Conveyors, Bucket Elevators, Hoppers, Loading Arms, Weigh Stations...

B

Fertilizer, Synthetic, Production

Including, but not limited to, all or part of the following: Bins, Conveyors, Bucket Elevators, Mixers, Dryers, Process Tanks, Reactors, Hoppers, Loading Arms, Weigh Stations

C

Fiberglass Panel Mfg

Including, but not limited to, all or part of the following: Conveyors, Mixers, Reactors, Process Tanks, Cutters

C

Filament Winder, Other

B

Filament Winder, Rule 1401 toxics

C

Filling Machine, Dry Powder

C

Film Cleaner

B

Flour Handling (combining conveying, packaging, and loadout)

E

Flour Manufacturing (combining milling and conveying)

E

Flour Milling

Including, but not limited to, all or part of the following: Bins, Conveyors, Bucket Elevators, Hoppers, Mills, Weigh Stations

D

Flow Coater

B

Fluid Catalytic Cracking Equipment

Including, but not limited to, all or part of the following: Absorbers, Accumulators, Columns, Compressors, Condensers, Drums, Fractionators, Heat Exchangers, Knock Out Pots, Pots, Pumps, Reactors, Regenerators, Scrubbers, Settling Tanks, Sumps, Tanks, Towers, Vessels

H

Fluid Elimination, Waste Water

B

Foam-in-Place Packaging

A

Fractionation Unit

Including, but not limited to, all or part of the following: Absorbers, Accumulators, Columns, Compressors, Condensers, Drums, Fractionators, Heat Exchangers, Knock Out Pots, Pots, Pumps, Reactors, Regenerators, Scrubbers, Settling Tanks, Sumps, Tanks, Towers, Vessels

E

Fruit and Vegetable Treating

A

Fuel Gas Mixer

C

Equipment/Process

Schedule

Fuel Gas, Treating

Including, but not limited to, all or part of the following: Absorbers, Accumulators, Columns, Compressors, Condensers, Drums, Heat Exchangers, Knock Out Pots, Pots, Pumps, Scrubbers, Settling Tanks, Towers, Vessels

D

Fuel Storage & Dispensing Equipment (Rule 461)

Including, but not limited to, all or part of the following: Storage Tanks, Dispensing Nozzles

A

Fumigation

A

Furnace, Arc

D

Furnace, Burn-Off, Armature

C

Furnace, Burn-Off, Drum

D

Furnace, Burn-Off, Engine Parts

C

Furnace, Burn-Off, Other

C

Furnace, Burn-Off, Paint

C

Furnace, Burn-Off, Wax

C

Furnace, Cupola

D

Furnace, Electric, Induction and Resistance

C

Furnace, Frit

C

Furnace, Galvanizing

C

Furnace, Graphitization and Carbonization

C

Furnace, Heat Treating

B

Furnace, Other Metallic Operations

C

Furnace, Pot/Crucible

C

Furnace, Reverberatory

D

Furnace, Wire Reclamation

C

Garnetting, Paper/Polyester

Including, but not limited to, all or part of the following: Feeders, Conveyors, Condensers, Cutters

C

Gas Plant

Including, but not limited to, all or part of the following: Accumulators, Columns, Condensers, Drums, Heat Exchangers, Knock Out Pots, Pots, Pumps, Reactors, Re-generators, Scrubbers, Settling Tanks, Sumps, Tanks, Towers, Vessels

E

Gas Turbine, Landfill/Digester Gas

E

Gas Turbine, >50 MW, other fuel

G

Gas Turbine, <=50 MW, other fuel

D

Gas Turbine, Emergency, <0.3 MW

A

Equipment/Process

Schedule

Gas Turbine, Emergency, >=0.3 MW

C

Gas-Oil Cracking Unit

Including, but not limited to, all or part of the following: Absorbers, Accumulators, Columns, Compressors, Condensers, Drums, Fractionators, Heat Exchangers, Knock Out Pots, Pots, Pumps, Reactors, Regenerators, Scrubbers, Settling Tanks, Sumps, Tanks, Towers, Vessels

E

Gasoline, In-line Blending

Including, but not limited to, all or part of the following: Absorbers, Accumulators, Columns, Compressors, Condensers, Drums, Fractionators, Heat Exchangers, Knock Out Pots, Pots, Pumps, Reactors, Regenerators, Scrubbers, Settling Tanks, Sumps, Tanks, Towers, Vessels

D

Gasoline, Refining

Including, but not limited to, all or part of the following: Absorbers, Accumulators, Columns, Compressors, Condensers, Drums, Fractionators, Heat Exchangers, Knock Out Pots, Pots, Pumps, Reactors, Regenerators, Scrubbers, Settling Tanks, Sumps, Tanks, Towers, Vessels

D

Gasoline, Separation - Liquid Production

Including, but not limited to, all or part of the following: Absorbers, Accumulators, Columns, Compressors, Condensers, Drums, Fractionators, Heat Exchangers, Knock Out Pots, Pots, Pumps, Reactors, Regenerators, Scrubbers, Settling Tanks, Sumps, Tanks, Towers, Vessels

D

Gasoline, Vapor Gathering System

Including, but not limited to, all or part of the following: Absorbers, Accumulators, Columns, Compressors, Condensers, Drums, Fractionators, Heat Exchangers, Knock Out Pots, Pots, Pumps, Reactors, Regenerators, Scrubbers, Settling Tanks, Sumps, Tanks, Towers, Vessels

D

Gasoline Blending Unit

Including, but not limited to, all or part of the following: Absorbers, Accumulators, Columns, Compressors, Condensers, Drums, Heat Exchangers, Knock Out Pots, Pots, Pumps, Scrubbers, Settling Tanks, Towers, Vessels

E

Equipment/Process

Schedule

Gasoline Fractionation Unit

Including, but not limited to, all or part of the following: Absorbers, Accumulators, Columns, Compressors, Condensers, Drums, Fractionators, Heat Exchangers, Knock Out Pots, Pots, Pumps, Reactors, Regenerators, Scrubbers, Settling Tanks, Sumps, Tanks, Towers, Vessels

F

Glass Forming Machine

C

Glass Furnace < 1TPD

B

Glass Furnace, > 50 TPD Pull

E

Glass Furnace, >= 1 TPD <= 50 TPD Pull

D

Grain Cleaning

Including, but not limited to, all or part of the following: Air Classifiers, Bins, Conveyors, Bucket Elevators, Hoppers, Mills, Screens, Weigh Stations

C

Grain Handling (combining storage and cleaning)

E

Grain Storage

C

Grinder, Size Reduction

B

Groundwater Treatment System

Including, but not limited to, all or part of the following: Air Strippers, Adsorbers, Process Tanks

C

Gypsum, Calcining

Including, but not limited to, all or part of the following: Air Classifiers, Bins, Conveyors, Bucket Elevators, Hoppers, Kilns, Weigh Stations, ..

E

Halon/Refrigerants, Recovery and Recycling Equipment

A1

Heater, (<5 MMBTU/hr)

B

Heater, (5 - 20 MMBTU/hr)

C

Heater, (>20-50 MMBTU/hr)

D

Heater, (>50 MMBTU/hr)

E

Hot End Coating, (Glass Mfg. Plant)

B

Hydrant Fueling, Petrol. Middle Distillate

Including, but not limited to, all or part of the following: Storage Tanks, Dispensing Nozzles

D

Equipment/Process

Schedule

Hydrocarbons, Misc., Treating

Including, but not limited to, all or part of the following: Absorbers, Accumulators, Columns, Compressors, Condensers, Drums, Fractionators, Heat Exchangers, Knock Out Pots, Pots, Pumps, Reactors, Regenerators, Scrubbers, Settling Tanks, Sumps, Tanks, Towers, Vessels

D

Hydrogen Desulfurization (HDS) Unit

Including, but not limited to, all or part of the following: Absorbers, Accumulators, Columns, Compressors, Condensers, Drums, Fractionators, Heat Exchangers, Knock Out Pots, Pots, Pumps, Reactors, Regenerators, Scrubbers, Settling Tanks, Sumps, Tanks, Towers, Vessels

F

Hydrogen Production Equipment

Including, but not limited to, all or part of the following: Absorbers, Accumulators, Columns, Compressors, Condensers, Drums, Fractionators, Heat Exchangers, Knock Out Pots, Pots, Pumps, Reactors, Regenerators, Scrubbers, Settling Tanks, Sumps, Tanks, Towers, Vessels

F

Hydrotreating Unit

Including, but not limited to, all or part of the following: Absorbers, Accumulators, Columns, Compressors, Condensers, Drums, Fractionators, Heat Exchangers, Knock Out Pots, Pots, Pumps, Reactors, Regenerators, Scrubbers, Settling Tanks, Sumps, Tanks, Towers, Vessels

E

IC Engine, (50-500 HP) Cogeneration

B

IC Engine, (> 500 HP) Cogeneration

C

IC Engine, Emergency, 50 - 500 HP

A

IC Engine, Emergency, >500 HP

B

IC Engine, Landfill/Digester Gas

D

IC Engine, Other, 50-500 HP

B

IC Engine, Other, >500 HP

C

Impregnating Equipment

C

Incineration, Hazardous Waste

H

Incinerator, < 300 lbs/hr, Non-Hazardous

E

Incinerator, >=300 lbs/hr, Non-Hazardous

F

Indoor Shooting Range

B

Equipment/Process

Schedule

Ink Mfg./Blending

Including, but not limited to, all or part of the following: Process Tanks, Mixers, ...

B

Inorganic Chemical Mfg.

Including, but not limited to, all or part of the following: Process Tanks, Mixers, Reactors

D

Insecticide Separation/Mfg

Including, but not limited to, all or part of the following: Absorbers, Accumulators, Columns, Compressors, Condensers, Coolers, Drums, Ejectors, Heat Exchangers, Knock Out Pots, Pots, Pumps, Reactors, Regenerators, Scrubbers, Settling Tanks, Sumps, Tanks, Towers, Vessels

E

Iodine Reaction

Including, but not limited to, all or part of the following: Columns, Compressors, Condensers, Coolers, Heat Exchangers, Pumps, Reactors, Regenerators, Scrubbers, Settling Tanks, Tanks, Towers

C

Isomerization Unit

Including, but not limited to, all or part of the following: Absorbers, Accumulators, Columns, Compressors, Condensers, Drums, Fractionators, Heat Exchangers, Knock Out Pots, Pots, Pumps, Reactors, Regenerators, Scrubbers, Settling Tanks, Sumps, Tanks, Towers, Vessels

E

Jet Engine Test Facility

C

Kiln, Natural Gas

C

Landfill Condensate/Leachate Collection/Storage

B

Landfill Gas, Collection

D

Landfill Gas, Treatment

E

Lime/Limestone, Conveying

Including, but not limited to, all or part of the following: Bins, Conveyors, Bucket Elevators, Hoppers, Weigh Stations

C

Liquid Separation, Other

Including, but not limited to, all or part of the following: Process Tanks, Settling Tanks, Separators, Tanks

D

Liquid Waste Processing, Hazardous

Including, but not limited to, all or part of the following: Air Floatation Units, Floatation Units, Filter Presses, Reactors, Process Tanks, Clarifiers, Settling Tanks, Waste Water Separators, Tanks

E

Equipment/Process

Schedule

Liquid Waste Processing, Non Hazardous

Including, but not limited to, all or part of the following: Air Floatation Units, Floatation Units, Filter Presses, Reactors, Process Tanks, Clarifiers, Settling Tanks, Waste Water Separators, Tanks

C

LPG, Tank Truck Loading

D

LPG, Treating

Including, but not limited to, all or part of the following: Absorbers, Accumulators, Columns, Compressors, Condensers, Drums, Fractionators, Heat Exchangers, Knock Out Pots, Pots, Pumps, Reactors, Regenerators, Scrubbers, Settling Tanks, Sumps, Tanks, Towers, Vessels

D

LPG Distillation Unit

Including, but not limited to, all or part of the following: Absorbers, Accumulators, Columns, Compressors, Condensers, Drums, Fractionators, Heat Exchangers, Knock Out Pots, Pots, Pumps, Reactors, Regenerators, Scrubbers, Settling Tanks, Sumps, Tanks, Towers, Vessels

E

Lube Oil Additive/Lubricant Mfg.

B

Lube Oil Re-refining

Including, but not limited to, all or part of the following: Absorbers, Accumulators, Columns, Compressors, Condensers, Drums, Fractionators, Heat Exchangers, Knock Out Pots, Pots, Pumps, Reactors, Regenerators, Scrubbers, Settling Tanks, Sumps, Tanks, Towers, Vessels

D

Marine Bulk Loading/Unloading Sys.

Including, but not limited to, all or part of the following: Bins, Conveyors, Bucket Elevators, Hoppers, Loading & Unloading Arms, Weigh Stations

D

Marine Vessel Displaced Vapor Control

Including, but not limited to, all or part of the following: Absorbers, Compressors, Condensers, Knock Out Pots, Pumps, Reactors, Saturators

D

Equipment/Process

Schedule

Merichem Unit

Including, but not limited to, all or part of the following: Absorbers, Accumulators, Columns, Compressors, Condensers, Drums, Fractionators, Heat Exchangers, Knock Out Pots, Pots, Pumps, Reactors, Regenerators, Scrubbers, Settling Tanks, Sumps, Tanks, Towers, Vessels

D

Merox Treating Unit

Including, but not limited to, all or part of the following: Absorbers, Accumulators, Columns, Compressors, Condensers, Drums, Fractionators, Heat Exchangers, Knock Out Pots, Pots, Pumps, Reactors, Regenerators, Scrubbers, Settling Tanks, Sumps, Tanks, Towers, Vessels

E

Metallic Mineral Production

Including, but not limited to, all or part of the following: Bins, Bucket Elevators, Conveyors, Feeders, Hoppers, Crushers, Cyclones, Log Washers, Mixers, Screens, Vibrating Grizzlies, Weigh Stations

E

Misc. Solvent Usage at a Premise

B

MTBE Production Facility

Including, but not limited to, all or part of the following: Absorbers, Accumulators, Columns, Compressors, Condensers, Coolers, Drums, Ejectors, Heat Exchangers, Knock Out Pots, Mixers, Pots, Pumps, Reactors, Regenerators, Scrubbers, Settling Tanks, Sumps, Tanks, Towers, Vessels

F

Natural Gas Odorizers

C

Natural Gas Dehydration

Including, but not limited to, all or part of the following: Absorbers, Accumulators, Columns, Compressors, Condensers, Drums, Heat Exchangers, Knock Out Pots, Pots, Pumps, Reactors, Regenerators, Scrubbers, Settling Tanks, Sumps, Tanks, Towers, Vessels

C

Natural Gas Stabilization Unit

Including, but not limited to, all or part of the following: Absorbers, Accumulators, Columns, Compressors, Condensers, Drums, Heat Exchangers, Knock Out Pots, Pots, Pumps, Reactors, Scrubbers, Regenerators, Settling Tanks, Sumps, Tanks, Towers, Vessels

E

Equipment/Process

Schedule

Nut Roasters

Including, but not limited to, all or part of the following: Bins, Conveyors, Bucket Elevators, Hoppers, Roasters, Coolers

C

Nut Shell Drying

Including, but not limited to, all or part of the following: Bins, Conveyors, Bucket Elevators, Hoppers, Dryers, Coolers

C

Oil Heating & Circulating System

Including, but not limited to, all or part of the following: Heat Exchangers, Pumps, Tanks

D

Oil/Water Separator (< 10,000 GPD)

Including, but not limited to, all or part of the following: Oil Water Separators, Pits, Sumps, Tanks, Vessels

B

Oil/Water Separator (>= 10,000 GPD)

Including, but not limited to, all or part of the following: Oil Water Separators, Pits, Sumps, Tanks, Vessels

C

Open-Air resin operations

A

Oven Bakery

C

Oven, Curing (Rule 1401 toxics)

C

Oven, Other

B

Packaging, Other

B

Paint Stripping, Molten Caustic

C

Paper Conveying

A

Paper Pulp Products

D

Paper Size Reduction

C

Pavement Grinder

B

Pavement Heater

B

Pelletizing, Chlorine Compounds

Including, but not limited to, all or part of the following: Conveyors, Bins, Hoppers, Pelletizers, Mixers, Dryers

C

Perlite Furnace

C

Perlite Handling

Including, but not limited to, all or part of the following: Conveyors, Bins, Hoppers, Bucket Elevators

C

Equipment/Process

Schedule

Pesticide/Herbicide Mfg.

Including, but not limited to, all or part of the following: Absorbers, Accumulators, Columns, Compressors, Condensers, Coolers, Drums, Ejectors, Heat Exchangers, Knock Out Pots, Mixers, Pots, Pumps, Reactors, Regenerators, Scrubbers, Settling Tanks, Sumps, Tanks, Towers, Vessels

E

Petroleum Coke Calcining

Including, but not limited to, all or part of the following: Bins, Conveyors, Reactors, Mixers, Process Tanks, Kilns

F

Petroleum Coke Conveying

Including, but not limited to, all or part of the following: Conveyors, Bins, Hoppers, Bucket Elevators

B

Pharmaceutical Mfg.

Including, but not limited to, all or part of the following: Conveyors, Bins, Hoppers, Reactors, Process Tanks, Pelletizers, Mixers, Dryers

C

Pipe Coating, Asphaltic

B

Plasma Arc Cutting

C

Plastic Mfg., Blow Molding Machine

B

Plastic/Resin Size Reduction

Including, but not limited to, all or part of the following: Bins, Bucket Elevators, Conveyors, Feeders, Hoppers, Grinders, Mills, Cyclones, Screens, Weigh Stations

B

Plastic/Resins Reforming

C

Plastic/Resins Treating

C

Plastisol Curing Equipment

B

Polystyrene Expansion/Molding

C

Polystyrene Expansion/Packaging

C

Polystyrene Extruding/Expanding

B

Polyurethane Foam Mfg.

Including, but not limited to, all or part of the following: Coolers, Heat Exchangers, Pumps, Reactors, Mixers, Process Tanks

C

Polyurethane Mfg/Production

B

Polyurethane Mfg/Rebonding

B

Process Line, Chrome Plating (Hexavalent)

C

Process Line, Chrome Plating (Trivalent)

B

Precious Metal, Recovery, Other

B

Precious Metal, Recovery, Catalyst

D

Printing Press, Air Dry

B

Equipment/Process

Schedule

Printing Press With IR or UV Over

B

Printing Press, Other

C

Printing Press, Screen

B

Production, Other

B

Railroad Car Loading/Unloading,Other

C

Railroad Car Unloading, liquid direct to trucks

B

Reaction, Other

C

Recovery, Other

B

Refined Oil/Water Separator

Including, but not limited to, all or part of the following: Oil/Water Separators, Pits, Sumps, Tanks, Vessels

B

Refrigerant Recovery/Recycling

A1

Rendering Equipment, Blood Drying

C

Rendering Equipment, Fishmeal Drying

C

Rendering Equipment, Rendering

D

Rendering Equipment, Separation, Liquid

C

Rendering Product, Handling

Including, but not limited to, all or part of the following: Conveyors, Bins, Hoppers, Bucket Elevators

C

Resin, Varnish Mfg.

Including, but not limited to, all or part of the following: Coolers, Heat Exchangers, Pumps, Reactors, Mixers, Process Tanks

D

Roller Coater

B

Rubber Mfg.

Including, but not limited to, all or part of the following: Coolers, Heat Exchangers, Pumps, Reactors, Mixers, Process Tanks

C

Rubber Presses or Molds with a ram diameter of more than 26 inches

Submitted before September 11, 1999

Submitted on or after September 11, 1999

A

B

Rubber Roll Mill

B

Sand Handling Equipment, Foundry

Including, but not limited to, all or part of the following: Conveyors, Bins, Hoppers, Bucket Elevators

C

Sand Handling Equipment w/Shakeout, Foundry

Including, but not limited to, all or part of the following: Conveyors, Bins, Hoppers, Bucket Elevators

D

Screening, Green Waste

A

Equipment/Process

Schedule

Screening, Other

Including, but not limited to, all or part of the following: Screens, Conveyors, Bins, Hoppers, Bucket Elevators

C

Semiconductor, Int. Circuit Mfg (<5 pieces)

B

Semiconductor, Int. Circuit Mfg (5 or more)

C

Semiconductor, Photo resist (<5 pieces)

B

Semiconductor, Photo resist (5 or more pieces)

C

Semiconductor, Solvent Cleaning (<5 pieces)

B

Semiconductor, Solvent Cleaning (5 or more pieces)

C

Sewage Sludge Composting

C

Sewage Sludge Drying, Conveying, Storage, Load-out

Including, but not limited to, all or part of the following: Conveyors, Bins, Hoppers, Bucket Elevators, Loading Arms

D

Sewage Sludge Digestion

D

Sewage Sludge Dryer

D

Sewage Sludge Incineration

H

Sewage Treatment, (> 5 MGD), Aerobic

Including, but not limited to, all or part of the following: Air Floatation Units, Floatation Units, Filter Presses, Clarifiers, Settling Tanks, Trickling Filters, Waste Water Separators, Tanks

F

Sewage Treatment, (<=5 MGD)

Including, but not limited to, all or part of the following: Air Floatation Units, Floatation Units, Filter Presses, Clarifiers, Settling Tanks, Trickling Filters, Waste Water Separators, Tanks

C

Sewage Treatment, (> 5 MGD), Anaerobic

Including, but not limited to, all or part of the following: Air Floatation Units, Floatation Units, Digesters, Filter Presses, Clarifiers, Settling Tanks, Trickling Filters, Waste Water Separators, Tanks

G

Sheet Machine

B

Equipment/Process

Schedule

Shell Blasting System

B

Shipping Container System

B

Sintering

C

Size Reduction, Other

Including, but not limited to, all or part of the following: Bins, Bucket Elevators, Conveyors, Dryers, Feeders, Hoppers, Crushers, Cyclones, Mixers, Screens, Weigh Stations

C

Size Reduction, Petroleum Coke

Including, but not limited to, all or part of the following: Bins, Bucket Elevators, Conveyors, Dryers, Feeders, Hoppers, Crushers, Cyclones, Mixers, Screens, Weigh Stations

C

Sludge Dewatering, Other

Including, but not limited to, all or part of the following: Filter Press, Process Tanks, Settling Tanks

D

Sludge Dryer, Other

B

Sludge Incinerator

H

Smoke Generator

B

Smokehouse

C

Soap/Detergent Mfg

Including, but not limited to, all or part of the following: Process Tanks, Mixers, Tanks, Conveyors, Bins, Hoppers, Bucket Elevators

D

Soil Treatment, Other

Including, but not limited to, all or part of the following: Bins, Conveyors, Ovens, ...

D

Soil Treatment, Vapor Extraction

Including, but not limited to, all or part of the following: Adsorbers, Afterburners, ...

C

Solder Leveling

B

Soldering Machine

B

Solvent Reclaim, Still (Multistage)

C

Solvent Reclaim, Still (Single stage)

A

Solvent Redistillation Unit

Including, but not limited to, all or part of the following: Absorbers, Accumulators, Columns, Compressors, Condensers, Drums, Heat Exchangers, Knock Out Pots, Pots, Pumps, Reactors, Regenerators, Scrubbers, Settling Tanks, Sumps, Tanks, Towers, Vessels

E

Equipment/Process

Schedule

Spent Stretford Solution Regeneration

Including, but not limited to, all or part of the following: Absorbers, Accumulators, Columns, Compressors, Condensers, Drums, Heat Exchangers, Knock Out Pots, Pots, Pumps, Reactors, Regenerators, Scrubbers, Settling Tanks, Sumps, Tanks, Towers, Vessels

D

Spray Equipment, Open

B

Spray Machine, Adhesive

B

Spray Machine, Coating

B

Spray Machine, Powder Coating

B

Spraying, Resin/Gel Coat

C

Sterilization Equipment

C

Stereolithography

A

Storage, Petroleum Coke

C

Storage Container, Baker-Type

B

Storage Container, Baker-Type w/Control

C

Storage Silo, Other Dry Material

A

Storage Tank, w/o Control, Crude Oil/Petroleum Products

B

Storage Tank, Acid with sparger

B

Storage Tank, Ammonia with sparger

B

Storage Tank, Asphalt <=50,000 gallons

B

Storage Tank, Asphalt >50,000 gallons

C

Storage Tank, Fixed Roof with Internal Floater

C

Storage Tank, Fixed Roof with Vapor Control

C

Storage Tank, Fuel Oil

A

Storage Tank, Lead Compounds

C

Storage Tank, LPG

A

Storage Tank, LPG w/Vaporizing System

C

Storage Tank, Other

A

Storage Tank, Other w/ Control Equipment

B

Storage Tank, with Passive Carbon s.s.

B

Storage Tank, with Passive Carbon m.s.

C

Storage Tank, with Passive Carbon t.s.

C

Storage Tank, Rendered Products

C

Equipment/Process

Schedule

Storage Tank, Waste Oil

A

Storage Tank with condenser

B

Storage Tank, with External Floating Roof

C

Stove-Oil Filter/Coalescer Facility

D

Striper, Can

B

Striper, Pavement

B

Stripping, Other

B

Sulfonation

Including, but not limited to, all or part of the following: Absorbers, Accumulators, Columns, Compressors, Condensers, Drums, Heat Exchangers, Knock Out Pots, Pots, Pumps, Reactors, Regenerators, Scrubbers, Settling Tanks, Sumps, Tanks, Towers, Vessels

E

Sulfuric Acid Plant

Including, but not limited to, all or part of the following: Accumulators, Columns, Condensers, Drums, Heat Exchangers, Knock Out Pots, Pots, Pumps, Regenerators, Scrubbers, Settling Tanks, Sumps, Tanks, Towers, Vessels

F

Sump, Spill Containment

A

Sump, Covered & Controlled

B

Tablet Coating Pans

A

Tank, Chemical Milling

C

Tank, Chrome Plating Hexavalent

C

Tank, Cadmium Plating Line

B1

Tank, Chromic Acid Anodizing

C

Tank, Degassing Unit

D

Tank, Lead Stripping

B

Tanks, Nickel Plating Line

B1

Tank, Nitric Acid

C

Tank, Plating (other)

B

Tank, Rule 1401 toxics

C

Tank, Emitting >1 lb/day PM10

C

Tank, Other, Hexavalent Chrome

C

Tank, Other, Aqueous Solution

B

Tank, Stripping w/Methylene Chloride

C

Textiles, Recycled, Processing

C

Equipment/Process

Schedule

Thermal Cracking Unit

Including, but not limited to, all or part of the following: Absorbers, Accumulators, Columns, Compressors, Condensers, Drums, Fractionators, Heat Exchangers, Knock Out Pots, Pots, Pumps, Reactors, Regenerators, Scrubbers, Settling Tanks, Sumps, Tanks, Towers, Vessels

E

Tire Buffer

A

Treating, Other

B

Treating, Petroleum Distillates

Including, but not limited to, all or part of the following: Absorbers, Accumulators, Columns, Compressors, Condensers, Drums, Fractionators, Heat Exchangers, Knock Out Pots, Pots, Pumps, Reactors, Regenerators, Scrubbers, Settling Tanks, Sumps, Tanks, Towers, Vessels

D

Vacuum Distillation Unit

Including, but not limited to, all or part of the following: Absorbers, Accumulators, Columns, Compressors, Condensers, Drums, Fractionators, Heat Exchangers, Knock Out Pots, Pots, Pumps, Reactors, Regenerators, Scrubbers, Settling Tanks, Sumps, Tanks, Towers, Vessels

E

Vacuum Machine

C

Vacuum Metalizing

B

Vacuum Pumps

C

Vegetable Oil Extractor

Including, but not limited to, all or part of the following: Bins, Conveyors, Cookers, Presses, Tanks, Kilns

E

Warming Device, Electric

A

Waste Water Treating (< 10,000 gpd)

Including, but not limited to, all or part of the following: Air Floatation Units, Floatation Units, Filter Presses, Clarifiers, Settling Tanks, Waste Water Separators, Tanks

B

Waste Water Treating ( >= 10,000 to <20,000 gpd)

Including, but not limited to, all or part of the following: Air Floatation Units, Floatation Units, Filter Presses, Clarifiers, Settling Tanks, Waste Water Separators, Tanks

C

Equipment/Process

Schedule

Waste Water Treating (< 20,000 gpd) no toxics

Including, but not limited to, all or part of the following: Air Floatation Units, Floatation Units, Filter Presses, Clarifiers, Settling Tanks, Waste Water Separators, Tanks

B

Waste Water Treating (>= 20,000 to < 50,000 gpd)

Including, but not limited to, all or part of the following: Air Floatation Units, Floatation Units, Filter Presses, Clarifiers, Settling Tanks, Waste Water Separators, Tanks

D

Waste Water Treating (>= 50,000 gpd)

Including, but not limited to, all or part of the following: Air Floatation Units, Floatation Units, Filter Presses, Clarifiers, Settling Tanks, Waste Water Separators, Tanks

E

Waste-to-Energy Equipment

H

Wet Gate Printing Equipment using Perchloroethylene

Submitted before September 11, 1999

Submitted on or after September 11, 1999

A

B

Weigh Station

A

Wood Treating Equipment

Including, but not limited to, all or part of the following: Coater Operations, Process Tanks

C

TABLE II
SPECIAL PROCESSING FEES

Schedule

Air Quality Analysis/Health Risk Assessment

Significant Project

Review

A

$2,864.10

$477.50

B

$2,864.10

$477.50

C

$2,864.10

$954.20

D

$2,864.10

$954.20

E

$2,864.10

$954.20

F

$2,864.10

$954.20

G

$2,864.10

$954.20

H

$3,819.50

$1,909.70

Certification Review

CEMS and FSMS Review1

Basic Fee2

Maximum Fee

Any combination of pollutants, diluent, flow, or other parameter3 for:

One to two components

$1,967.60

$3,522.90

Three to four components

$2,606.10

$6,254.60

For each additional component beyond four, the following amount is added to the fee for four components

$0

$1,601.40

For time-sharing of CEMS, the following amount is added to any fee determined above

$0

$1,601.40

ACEMS Review

Basic Fee4

Maximum Fee

$1,967.60

$6,254.60

1The certification fee includes the initial application approval, approval of test protocol, and approval of the performance test results. An application resubmitted after a denial will be treated as a new application and will be subject to a new fee.

2Covers up to 40 hours evaluation time for the first two components, 60 hours for the first four components, and up to an additional 12 hours for each component beyond four. Excess hours beyond these will be charged at $80.10 per hour, to the maximum listed in the table.

3Additional components, as necessary, to meet monitoring requirements (e.g., moisture monitor).

4Covers up to 40 hours evaluation time.

TABLE III


EMISSION FEES

Annual Emissions

(tons/yr)

Organic Gases*

($/ton)

Specific Organics**

($/ton)

Nitrogen Oxides

($/ton)

Sulfur Oxides

($/ton)

Carbon Monoxide

($/ton)

Particulate Matter***

($/tons)

4 - 25

$292.80

$52.40

$171.30

$203.10

$223.90

>25 - 75

$475.40

$83.00

$272.10

$328.30

$362.80

>75

$711.60

$124.50

$409.80

$492.90

$543.20

> 100

$3.50

    * Excluding Ozone Depleters, Organic Toxics, and Specific Organic Gases.


    ** See Specific Organic Gases paragraph (b)(25).
    *** Excluding Particulate Toxic Air Contaminants, See Table IV.

TABLE IV

TOXIC AIR CONTAMINANTS AND OZONE DEPLETERS

TOXIC COMPOUNDS

Fee $/1 lb
(FY 98-99)

Fee $/1 lb
(FY 99-00)

Asbestos *

$3.00

$3.06

Benzene

$1.00

$1.02

Cadmium *

$3.00

$3.06

Carbon tetrachloride

$1.00

$1.02

Chlorinated dioxins and dibenzofurans (15 species)

$5.00

$5.10

Ethylene dibromide

$1.00

$1.02

Ethylene dichloride

$1.00

$1.02

Ethylene oxide

$1.00

$1.02

Formaldehyde

$0.21

$0.21

Hexavalent chromium *

$4.00

$4.08

Methylene chloride

$0.05

$0.05

Nickel *

$2.00

$2.04

Perchloroethylene

$0. 21

$0.21

1,3-Butadiene

$3.00

$3.06

Inorganic arsenic

$3.00

$3.06

Beryllium *

$3.00

$3.06

Polynuclear aromatic hydrocarbons (PAHs)

$3.00

$3.06

Vinyl chloride

$1.00

$1.02

Lead *

$1.00

$1.02

1,4-Dioxane

$0.21

$0.21

Trichloroethylene

$0.10

$0.10

OZONE DEPLETERS

Fee $/1 lb

Fee $/1 lb

Chlorofluorocarbons (CFCs)

$0.18

$0.18

1,1,1-trichloroethane

$0.04

$0.04


* Particulate Toxic Air Contaminants

TABLE V

ANNUAL CLEAN FUELS FEES

Volatile Organic Compounds
($/ton)

Nitrogen Oxides
($/ton)

Sulfur Oxides
($/ton)

Particulate Matter
($/ton)

$24.60

$13.80

$17.10

$13.80

TABLE VI

DEMOLITION, ASBESTOS AND LEAD NOTIFICATION FEES

Commercial Demolition, Renovation and Abatement, by Project Size1

100 to 1,000square feet

>1,000 to 5,000

square feet

>5,000 to 10,000

square feet

>10,000

square feet

$26.20

$80.10

$187.10

$294.00

Demolition Notifications of < 100 square feet and all Residential Notifications for Single Unit Dwellings

Revision to Notification

Special Handling Fee2

Procedure 4 or 5 Notification, all sizes

$26.20

$10.60

$25.00

$294.00

1 For commercial demolition, the fee is based on the building size.
For refinery or chemical unit demolition, the fee is based on the structure’s footprint surface area.
For renovation and abatement, the fee is based on the amount of asbestos removed.

2 For all notifications postmarked less than 14 calendar days prior to project start day

Rule 301 Keyword Index
Additional operator

11

Adjustment of fees

Administrative error

Equipment not listed in Table I

28

7

Air Quality Analysis

Fees – Table II

Payment and requirements

60

24

Alteration

Definition

Facility permit

Fees – Summary Permit Fee Rates table

Small business discount

Permit processing fees

2

30, 37

44

10

12

Alternative Continuous Emissions Monitoring System (ACEMS), see also CEMS

4

Annual emissions

18-21

Annual operating permit emissions fee

Amendment request

Clean Air Solvents

Clean Fuels

Emission fee thresholds

Fees - Table III

Non-permitted equipment

Ozone depleter

Penalties and underpayment

Prior reporting periods

Refunds

Toxic air contaminant

18

16

17

17

61

16

17

19

18

28

17

Annual operating permit renewal fee

Fuel transfer and dispensing

Nonpayment

Schedules

Temporary permit to operate

13

15

13

14-15

Annual renewal date

13-15

Applicability

1

Applications submitted before July 1, 1990

8

Asbestos demolition and renovation

Fees

Fees – Table VI

39

63

Banking

Definition

Evaluation

Fees – Summary ERC Processing Rates

Small business discount

2

12

44

10

California Environmental Quality Act (CEQA)

23

Cancellation

Definition

Fee

Nonpayment

Title V permit

2

28

8

37

CEMS – see Continuous Emissions Monitoring System

3

Certification of Clean Air Solvents

40

Certified permit copies

21, 39

Certified Equipment Permit

Definition

Fees

2

10

Change of operator

Annual renewal date

CEMS

Expired permit to construct fee

Facility permit

Fees – Summary Permit Fee Rates

Permit processing fees

RECLAIM

Rule 222

15

27

8

38

44

11

30

42

Clean Air Solvent

Annual operating permit emissions fee

Certificate

Definition

Fees

16

3

3

40

Clean Fuels

Fees – Table V

Fee thresholds

63

17

Continuous Emissions Monitoring System (CEMS)

Definition

Fees – Table II

Missing data

Requirements

3

60

32-33

25-27

Declaration of total emissions from preceding reporting period

18

Definitions

2-7

Discounts

Identical equipment

Maximum discount

Small business

10

10

9

Dry cleaning

17

Emission factor

Definition

Determination

4

18

Emission Reduction Credit (ERC)

Definition

Fees – Summary ERC Processing Rates

Inter-basin, inter-district, or interpollutant transfers

Permit processing fee

Small business discount

4

44

27

12

10

Emission source

4

Emission fees – Table III

61

Equipment

5

Equipment already constructed

9

Equipment not listed in Table I

7

Equipment previously exempted by Rule 219

11

Expiration

Definition

Nonpayment

Permit processing fees

Reinstatement

5

15

8

22

Express permit processing fee

43

Facility

5

Facility permit

Amendment

Annual operating permit renewal fee

Certified permit copies

Change of operating condition

Change of operator

Definition

Facility permit revision

Fees

Reissued permits

30

38

39

30, 38

30, 38

5

37

30

33, 39

Facility registration

Definition

Fees

5

41

Failure to obtain a permit

9

Formaldehyde emissions, small business

17

Fuel Sulfur Monitoring System (FSMS), see also CEMS

4

Gasoline transfer and dispensing

14

Government agencies

29

Health risk assessment

Fees – Table II

24

60

Identical equipment

Definition

Discount

5

10

Inspection fees for Statewide equipment

43

Inter-basin, inter-district, interpollutant ERC transfers

27

Lead abatement

Fees – Table VI

Notification

63

39

Manufacturer, special small business definition

9

Methylene chloride emissions, small business

17

Modification, see Alteration

National Emission Standard for Hazardous Air Pollutants (NESHAP)

39

Nonpayment

Permit processing fees

Annual operating permit renewal fees

8

15

Non-manufacturer, special small business definition

9

Non-permitted emission sources subject to Rule 222

41

Non-permitted equipment

16

Non-road and qualifying engines

Definition

Permit processing fees

5

11

Non-tradeable allocation credit mitigation fee

33

Not-for-profit training center

10

Optional express permit processing fee

43

Ozone depleter, annual operating permit emission fee

Fee Table IV

17

62

Penalties

Annual operating permit emission fees

Annual operating permit renewal fees

Permit processing fees

RECLAIM pollutant emission fees

Reinstatement

Rule 222

Semi-annual operating permit emission fees

Statewide Equipment Registration inspection fees

Title V

19

15

8

32

22

42

21

43

37

Perchloroethylene emissions

17

Permit fee rates tables

Table IA - Control equipment

Table IB - Basic equipment

45

47

Permit processing fees for non-RECLAIM and non-Title V permits

Alteration/modification/addition

Applications submitted before July 1, 1990

Change of operating conditions

Change of operator/additional operator

Certified equipment permit

Discounts

Emission reductions

Equipment already constructed

Equipment previously exempted by Rule 219

Equipment/process not listed in Table I

Expired permit to construct

Fees – Summary Permit Fee Rates table

Identical equipment

Nonpayment penalty

Non-road or Qualifying engines

Relocation

Registration permit

Serial number change

Small business

Waiver for "state of emergency"

12

8

12

11

10

10

12

9

11

7

8

44

10

8

11

7

11

13

10

13

Predictive or Parametric Emissions Monitoring System (PEMS), see also CEMS

4

Premises

6

Public notice

Emission reduction

Significant project

Title V

13

25

37

Qualifying portable engine

Definition

Fees

6

11

RECLAIM fees

Annual operating permit renewal fee

APEP

Breakdown

Certified permit copies

Change of operating conditions

Change of operator

Facility permit amendment

Increase annual allocation

Missing data

Non-tradeable allocation credits

RECLAIM pollutant emission fee

Reissued permits

Transaction registration fee

30

32

33

33

30

30

30

34

32

33

31

33

31

RECLAIM Trading Credits (RTCs)

6

Reductions of fees

29

Redundant emission controls

16

Refunds

28

Registration Permit

Definition

Fees

6

11

Reinstatement

Expired application/permit

Facility permit

Fee

Revoked permits

Rule 222 filing

22

22

22

23

41

Reissued permit

Change of conditions

Facility permit

Fees

RECLAIM

Revoked permit

12

39

21

33

23

Relocation

Definition

Permit processing fees

State of emergency

6

7

13

Returned check

41

Revocation

Definition

Reinstatement

Nonpayment

Title V

6

23

20

37

Rule 222

41

Service charge for returned check

41

Significant project

Fees – Table II

25

60

Small business

Definition

Definition for failure to obtain a permit only

Discount

Dry cleaning facility

Formaldehyde, perchloroethylene, or methylene chloride emissions

Permit processing fees

6

9

10

17

17

9

Solar energy equipment credit

14

Special processing fees

Fee table

Requirements

60

23

Specific organic gases

6

Statewide equipment

Definition

Inspection fees

7

43

Stationary source

7

Summary ERC Processing Rates table

44

Summary Permit Fee Rates table

44

Temporary permit to operate

Definition

Renewal of temporary permit to operate new equipment

7

13

Title V facilities

Application cancellation

Existing facility

Fees

Modification

New facility

Nonpayment penalties

Permit revision

Public hearing/public notice

Renewal

37

34

34-35

36

36

37

36

37

36

Toxic air contaminant

Annual operating permit emission fee

Fees – Table IV

17

62

Waivers

State of emergency

New manufacturing facility

13

28