SOUTH COAST AIR QUALITY MANAGEMENT DISTRICT
 
 
 
(Adopted Feb. 4, 1977)(Amended May 27, 1977)(Amended Jan. 6, 1978)
(Amended June 16, 1978)(Amended April 4, 1980)(Amended Sept. 5, 1980)
(Amended June 5, 1981)(Amended July 9, 1982)(Amended Dec. 3, 1982)
(Amended June 3, 1983)(Amended May 4, 1984)(Amended July 6, 1984)
(Amended Nov. 2, 1984)(Amended Dec. 6, 1985)(Amended May 1, 1987)
(Amended June 3, 1988)(Amended December 2, 1988)(Amended January 6, 1989)
(Amended June 2, 1989)(Amended June 1, 1990)(Amended June 7, 1991)
(Amended December 6, 1991)(Amended June 5, 1992)(Amended July 10, 1992)
(Amended June 11, 1993)(Amended October 8, 1993)(Amended June 10, 1994)
(Amended May 12, 1995)(Amended October 13, 1995)(Amended May 10, 1996)
(Amended May 9, 1997)(Amended May 8, 1998)
 
 

RULE 301. PERMIT FEES

(a) Applicability
California Health and Safety Code Section 40510 provides authority for the South Coast Air Quality Management District to adopt a fee schedule for the issuance of permits to cover the cost of evaluation, planning, inspection, and monitoring related to that activity. This rule establishes such a fee schedule and requires that fees be paid for:

  1. Permit processing for Facility Permits [see subdivisions (o), (p) and (q)], Facility Registrations [see subdivision (v)], and Permits to Construct and/or Permits to Operate equipment (submitted pursuant to Regulation II) that may cause air pollution or equipment intended to control air pollution [see subdivision (c)].
  2. Processing of applications for effecting emission reductions, banking emissions, obtaining emissions reduction credit certificates, or registering emission reduction credits, pursuant to Regulation XIII [see paragraph (c)(4)].
  3. Annual operating permit renewal fee [see subdivision (d)].
  4. Annual operating permit emissions fee [see subdivision (e)] or Regional Clean Air Incentives Market (RECLAIM) Trading Credits (RTCs) [see subdivision (o)].
  5. Duplicate and reissued permits [see subdivision (f)].
  6. Reinstating expired applications or permits [see subdivision (g)].
  7. Reinstating revoked permits [see subdivision (h)].
  8. RECLAIM Transaction Registration Fee [see subdivision (o)].
  9. Non-Tradeable Allocation Credit Mitigation Fee [see subdivision (o)].
  10. Environmental Impact Analysis, Air Quality Analysis, Health Risk Assessment, Public Notification on Significant Projects and Emission Reduction Credits (pursuant to Regulation XIII - New Source Review) [see paragraph (c)(4) and subdivision (i) of this rule].
  11. Asbestos demolition and renovation activities [see subdivision (r)].
  12. Lead abatement activities [see subdivision (s)].
  13. Evaluation of permit applications submitted for compliance under a National Emission Standard for Hazardous Air Pollutants (NESHAP) [see subdivision (t)].
  14. Certification of Clean Air Solvents [see subdivision (u)].
(b) Definitions
For the purpose of this rule, the following definitions shall apply:
  1. ALTERATION or MODIFICATION means any physical change, change in method of operation of, or addition to, an existing equipment requiring an application for Permit to Construct pursuant to Rule 201. Routine maintenance and/or repair shall not be considered a physical change. A change in the method of operation of equipment, unless previously limited by an enforceable permit condition, shall not include:
    1. An increase in the production rate, unless such increase will cause the maximum design capacity of the equipment to be exceeded; or
    2. an increase in the hours of operation.
  1. BANKING means the process of recognizing and certifying emission reductions and registering transactions involving emission reduction credits.
  2. CANCELLATION is an administrative action taken by the District which nullifies or voids a previously pending application for a permit.
  3. CERTIFIED EQUIPMENT PERMIT means a permit issued to a manufacturer or distributor for a specific model or series of models of equipment. By this permit, the District certifies that the equipment meets all District rules and Best Available Control Technology (BACT) requirements under a set of conditions. Eligibility for the certification process shall be limited to equipment for which the following conditions exist, as determined by the Executive Officer:
    1. Equipment operation and emission characteristics will be applicable to a number of identical pieces of equipment;
    2. Permitting can be accomplished through the use of identical permit conditions for each piece of equipment regardless of use or location;
    3. The equipment is exempt from emission offsets as defined in Rule 1304(a)(4) or Rule 1304(a)(5); or the emissions of each criteria pollutant, except lead, are determined to be less than the limits listed in Rule 1303, Appendix A, Table A-1; and
    4. The equipment does not emit lead or the toxic emissions do not result in a Maximum Individual Cancer Risk (MICR) equal to or greater than one in a million as calculated according to Rule 1401.
    Certified Equipment Permit shall be valid for one year, and shall be renewed annually if the Executive Officer determines the equipment meets all District rules and BACT requirements. Certification shall not relieve the person constructing, installing or operating the equipment from the requirement to obtain all necessary permits to construct and permits to operate, or from compliance with any other District rule including the requirements of Regulation XIII.
  4. CLEAN AIR SOLVENT is a VOC-containing material used to perform solvent cleaning, solvent finishing, or surface preparation operations or activities, which:
    1. Contains no more than fifty (50) grams of VOC per liter of material, as supplied;
    2. Exerts no more than five (5) mm Hg of VOC composite partial vapor pressure at 20oC (68oF);
    3. Reacts to form ozone at a rate not exceeding that of toluene;
    4. Contains no compounds classified as Toxic Air Contaminants (TACs) by the Federal Clean Air Act, or Ozone Depleting Compounds (ODCs) and Global Warming Compounds (GWCs) as defined by the District; and,
    5. Has been certified by the District to meet the criteria stated in subparagraphs (b)(5)(A) through (b)(5)(D) according to test methods and procedures approved by the District.
  5. CLEAN AIR SOLVENT CERTIFICATE is a certificate issued by the District to a manufacturer or distributor for a specific product or class of products that meet(s) the criteria for a Clean Air Solvent.
  6. CONTINUOUS EMISSIONS MONITORING SYSTEM (CEMS) is a system comprised of components that continuously measure all parameters necessary to determine pollutant concentration or pollutant mass emissions, pursuant to a District rule or regulation.
    1. For the purpose of this rule, a CEMS includes, but is not limited to, the following analyzers, monitors, components, systems, or equipment:
      1. Pollutant concentration analyzer(s) (e.g., NOx, SOx, CO, Total Sulfur) and associated sample collection, transport, and conditioning equipment, and data acquisition and logging systems,
      2. Diluent gas analyzer (O2 or CO2),
      3. Flow monitor (direct in-stack measurement or indirectly calculated from fuel usage or other process parameters approved by the Executive Officer), and
      4. Other equipment (e.g., moisture monitor) as required to comply with monitoring requirements.
    2. For the purpose of this rule, a "time-shared CEMS" means a CEMS as described in subparagraph (7)(A) which is common to several sources of emissions at the same facility.
    3. For the purpose of this rule, a "Fuel Sulfur Monitoring System" or "FSMS" may be used as an alternative to a CEMS SOx monitoring requirement, subject to District Rules and Regulations, and the approval of the Executive Officer. An FSMS is a total sulfur monitoring system configured similar to the CEMS described in subparagraph (7)(A) but, as an alternative to directly monitoring SOx emissions at sources required to have SOx CEMS (at the same facility), SOx emission information at each affected source is determined "indirectly" by monitoring the sulfur content of the fuel gas supply firing the affected sources.
    4. For the purpose of this rule, an "Alternative Continuous Emissions Monitoring System" or "ACEMS" (also known as a "Predictive or Parametric Emissions Monitoring System" or "PEMS") may be used as an alternative to a CEMS pollutant monitoring requirement, subject to District Rules and Regulations, and the approval of the Executive Officer. Instead of directly monitoring the pollutant emissions at a source required to have a CEMS as in subparagraph (7)(A), emission information is "predicted" by the ACEMS or PEMS by monitoring key equipment operating parameters (e.g., temperature, pressure) at the affected source, irrespective of exhaust gas or fuel supply analysis.
  7. EMISSION FACTOR means the amount of air contaminant emitted per unit of time or per unit of material handled, processed, produced, or burned.
  8. EMISSION REDUCTION CREDIT (ERC) means the amount of emissions reduction which is verified and determined by the Executive Officer to be eligible for credit in an emissions reduction bank.
  9. EMISSION SOURCE is any equipment or process subject to Rule 222. The source does not require a permit, but the owner/operator is required to file information pursuant to Rule 222 and Rule 301(x).
  10. EQUIPMENT means any article, machine, or other contrivance, or combination thereof, which may cause the issuance or control the issuance of air contaminants, and which:
    1. (A) Requires a permit pursuant to Rules 201 and/or 203; or
    2. (B) Is in operation pursuant to the provisions of Rule 219
  11. EXPIRATION means the end of the period of validity for an application, Permit to Operate, or a temporary Permit to Operate.
  12. FACILITY means any source, equipment, or grouping of equipment or sources, or other air contaminant-emitting activities which are located on one or more contiguous properties within the District, in actual physical contact or separated solely by a public roadway or other public right-of-way, and are owned or operated by the same person (or persons under common control) or an outer continental shelf (OCS) source as defined in 40 CFR § 55.2. Such above-described groupings, if on noncontiguous properties but connected only by land carrying a pipeline, shall not be considered one facility. Equipment or installations involved in crude oil and gas production in Southern California coastal or OCS waters, and transport of such crude oil and gas in Southern California coastal or OCS waters, shall be included in the same facility which is under the same ownership or use entitlement as the crude oil and gas facility on-shore.
  13. FACILITY PERMIT is a permit which consolidates existing equipment permits and all new equipment at a facility, into one permit. A facility permit may be issued pursuant to Regulation XX and/or XXX.
  14. FACILITY REGISTRATION is a permit which consolidates existing equipment permits and all new equipment at a facility into one permit. A Facility Registration may be issued at District discretion to any facility not subject to Regulation XX or XXX.
  15. IDENTICAL EQUIPMENT means any equipment which is to be operated by the same operator, and have the same equipment address, and have the same operating conditions and processing material to the extent that a single permit evaluation would be required for the set of equipment. Portable equipment, while not operating at the same location, may qualify as identical equipment.
  16. NON-ROAD ENGINE is a portable engine that requires a permit and is certified by the Executive Officer to be a Non-Road Engine regulated by U.S. EPA pursuant to 40 CFR Part 89.
  17. PREMISES means one parcel of land or contiguous parcels of land under the same ownership or entitlement to use, not including the parcels which are remotely located and connected only by land carrying a pipeline.
  18. QUALIFYING PORTABLE ENGINE is a portable engine that requires a permit and is certified by the Executive Officer to meet all the requirements of Non-Road Engine of 40 CFR Part 89 except date of manufacture, and has been demonstrated to meet the emission limitations of 40 CFR Section 89.112-96.
  19. RECLAIM TRADING CREDITS (RTCs) means the amount of emissions credit available to a facility for use at the facility for transfer or sale to another party. Each RTC has a denomination of one pound of RECLAIM pollutant and a term of one year, and can be issued as part of a facility's Annual Allocation or alternatively in the form of an RTC certificate.
  20. REGISTRATION PERMIT means a permit to construct or permit to operate issued to an owner/operator of equipment which has previously been issued a Certified Equipment Permit by the District. The owner/operator shall agree to operate under the conditions specified in the Certified Equipment Permit.
  21. REVOCATION is an action taken by the Hearing Board following a petition by the Executive Officer which invalidates a Permit to Construct or a Permit to Operate.
  22. SMALL BUSINESS is as defined in Rule 102 as "Small Business." [To be considered for amendment at the June 12, 1998 Governing Board meeting.]
  23. SPECIFIC ORGANIC GASES are any of the following compounds:
    1. trifluoromethane (HFC-23)
      chlorodifluoromethane (HCFC-22)
      dichlorotrifluoroethane (HCFC-123)
      tetrafluoroethane (HFC-134a)
      dichlorofluoroethane (HCFC-141b)
      chlorodifluoroethane (HCFC-142b)
      1,1,1-trifluoroethane (HFC-143a)
      1,1-difluoroethane (HFC-152a)
      cyclic, branched, or linear, completely fluorinated alkanes
      cyclic, branched, or linear, completely fluorinated ethers with no unsaturations
      cyclic, branched, or linear, completely fluorinated tertiary amines with no unsaturations
      sulfur-containing perfluorocarbons with no unsaturations and with sulfur bonds only to carbon and fluorine.
  24. (25) STATEWIDE EQUIPMENT is equipment that is permitted pursuant to Proposed District Statewide Regulation XXI.
  25. (26) STATIONARY SOURCE (or SOURCE) means any grouping of equipment or other air contaminant-emitting activities which are located on parcels of land within the District, in actual physical contact or separated solely by a public roadway or other public right-of-way, and are owned or operated by the same person or by persons under common control. Such above-described groupings, if remotely located and connected only by land carrying a pipeline, shall not be considered one stationary source. (Under RECLAIM, a SOURCE is any individual unit, piece of equipment or process which may emit an air contaminant and which is identified, or required to be identified, in the RECLAIM Facility Permit.)
  26. (27) TEMPORARY PERMIT TO OPERATE represents interim authorization to operate equipment until the Permit to Operate is granted or denied. A temporary Permit to Operate is not issued by the District but may exist pursuant to Rule 202
.

(c) Fees for Permit Processing

    (1) Permit Processing Fee (2) Fee for Change of Operator or Additional Operator
    Under Rule 209 (Transfer and Voiding of Permits), a permit granted by the District is not transferable. Every applicant who files an application for a change of operator or additional operator with the same operating conditions of a Permit to Operate shall be subject to a permit processing fee as follows: (3) Change of Operating Condition, Alteration/Modification/Addition
    When an application is filed for a permit involving change of operating conditions, and/or a permit involving proposed alterations/modifications or additions resulting in a change to any existing equipment for which a Permit to Construct or a Permit to Operate was granted and has not expired in accordance with these rules, the permit processing fee shall be the amount set forth in the Summary Permit Fee Rates tables. The only exceptions to this fee shall be: (4) Fee for Evaluation of Applications for Emission Reductions
    Every applicant who files an application for effecting emission reductions, banking emissions, obtaining emission reduction credit certificates, or registering emission reduction credits, as described in paragraph (a)(2) of this rule shall, at the time of filing, pay a processing fee in accordance with Schedule I in the Summary Permit Fee Rates tables. Additionally, the applicant shall pay a fee of $128.50 for publication of public notice if required by Rule 1310(c).

    (5) Fee Waiver for Equipment Destroyed or Relocated due to a "State of Emergency"
    No permit processing fee shall be assessed for any application filed to replace equipment destroyed, or for the relocation of currently permitted equipment residing within a condemned building, as the result of any event declared to be a "state of emergency" by the local, state, or federal authorities.

    (6) Fee for Serial Number Change of Similar Equipment
    Upon surrender of a Permit to Operate and demonstration to the satisfaction of the Executive Officer that a similar equipment, except for serial number, will be provided for equipment, a Permit to Operate will be reissued bearing the new serial number upon payment of a fee of $107.10.

(d) Annual Operating Permit Renewal Fee
    (1) Renewal of Permit to Operate
    All Permits to Operate (including temporary Permits to Operate pursuant to Rule 202) for equipment on the same premises shall be renewed on the annual renewal date set by the Executive Officer. A Permit to Operate is renewable if the permit is valid according to the District's Rules and Regulations and has not been voided or revoked and if the annual operating permit fee is paid within the time and upon the notification specified in paragraph (d)(8) of this rule.

    (2) The annual operating permit renewal fee shall be assessed in accordance with the following schedules:

    EQUIPMENT/PROCESS SCHEDULES  ANNUAL OPERATING PERMIT RENEWAL FEE 
    Equipment/Processes appearing in Tables IA and IB as Schedule A1  $87.70 
    Equipment/Processes appearing in Tables IA and IB as Schedules A, B, and B1 

    (excluding Rule 461 liquid fuel dispensing nozzles) 

    $175.60 
    Equipment/Processes appearing in Tables IA and IB as Schedules C and D  $629.00 
    Equipment/Processes appearing in Tables IA and IB as Schedules E, F, G, and H  $1,510.10 
    Rule 461 liquid fuel dispensing nozzle  $35.30 per nozzle
     

    A facility subject to Rule 461 – Gasoline Transfer and Dispensing shall be assessed a compliance fee as part of the annual operating permit renewal fee for each liquid fuel dispensing nozzle in gasoline dispensing service. The per-nozzle fee shall be as follows:

    FY98-99

    FY99-2000 and thereafter

    $12 per nozzle

    $24 per nozzle

    A source shall be assessed one annual operating permit renewal fee for permits subject to Rule 461, based on the number of liquid fuel dispensing nozzles, regardless of the number of such permits the source currently has in its possession.

    (3) Credit for Solar Energy Equipment
    Any permittee required to pay an annual operating permit renewal fee shall receive an annual fee credit for any solar energy equipment installed at the site where the equipment under permit is located.

    (4) Renewal of Temporary Permit to Operate New Equipment
    A Permit to Construct, which has not expired or has not been canceled or voided, will be considered a temporary Permit to Operate on the date the applicant completes final construction and commences operation, pursuant to subdivision (a) of Rule 202. For the purposes of this paragraph, the date specified as the estimated completion date on the application for Permit to Construct will be considered the date of commencement of operation, unless the applicant notifies the District in writing that operation will commence on another date, or unless the equipment already has been placed in operation. Such temporary Permit to Operate shall be valid for the period of time between commencement of operation and the applicant's next annual renewal date following commencement of operation and shall be subject to a prorated amount of the annual operating permit renewal fee prescribed in paragraph (d)(2). The proration shall be based on the time remaining to the next annual renewal date. On that next annual renewal date, and each year thereafter, the annual operating permit renewal fee for the temporary Permit to Operate shall be due in the amount prescribed in paragraph (d)(2). This paragraph is not applicable for equipment registered under the CARB Statewide Portable Equipment Registration Program or registered under District Rule 2100.

    (5) Renewal of Temporary Permit to Operate Existing Equipment
    In the case of equipment operating under a temporary Permit to Operate issued pursuant to subdivision (c) of Rule 202, where a Permit to Construct was not issued, the company is immediately subject to a prorated amount of the annual operating permit renewal fee prescribed in paragraph (d)(2) following the submission of the completed application for Permit to Operate. The proration shall be based on the time remaining to the next annual renewal date. On that next annual renewal date, and each year thereafter, the annual operating permit renewal fee shall be due in the amount prescribed in paragraph (d)(2). If no annual renewal date has been established, the Executive Officer shall set one upon receipt of the application.

    (6) If, for any reason, the Executive Officer determines it is necessary to change the annual renewal date, all annual operating permit renewal fees shall be prorated according to the new annual renewal date.

    (7) The same annual renewal date shall apply from one change of operator to another.

    (8) Notice of Amount Due and Nonpayment Penalties

    At least thirty (30) days before the annual renewal date, the owner/operator of equipment under permit will be notified by mail of the amount to be paid and the due date. If such notice is not received at least thirty (30) days before the annual renewal date, the owner/operator of equipment under permit shall notify the District on or before the permit renewal date that said notice was not received. The annual operating permit renewal fee for each permit shall be in the amount described in paragraph (d)(2). If the annual operating permit renewal fee is not paid within thirty (30) days after the due date, the permit will expire and no longer be valid. In such a case, the owner/operator will be notified by mail of the expiration and the consequences of operating equipment without a valid permit, as required by Rule 203 (Permit to Operate). For the purpose of this paragraph, the fee payment will be considered to be received by the District if it is postmarked by the United States Postal Service on or before the expiration date stated on the billing notice. If the expiration date falls on a Saturday, Sunday, or a state holiday, the fee payment may be postmarked on the next business day following the Saturday, Sunday, or state holiday with the same effect as if it had been postmarked on the expiration date.

    (9) Any person holding permits to operate for two or more emission controls applicable to the same equipment who establishes that any of the emission controls is redundant, i.e., not necessary to assure compliance with all applicable legal requirements, shall not be required to pay annual operating permit renewal fees under subdivision (d) for the redundant equipment. The Executive Officer may reinstate the obligation to pay such fees at any time upon determination that operating the control is or has become necessary to assure compliance with any applicable legal requirements.

(e) Annual Operating Permit Emissions Fee
    (1) In addition to the annual operating permit renewal fee, the owner/operator of all equipment operating under permit shall pay an annual operating permit emissions fee based on the total weight of emissions of each of the contaminants specified in Table III from all equipment used by the operator at all locations, including total weight of emissions of each of the contaminants specified in Table III resulting from all products which continue to passively emit air contaminants after they are manufactured, or processed by such equipment, with the exception of such product that is shipped or sold out of the District so long as the manufacturer submits records which will allow for the determination of emissions within the District from such products.

    (2) Emissions from equipment not requiring a written permit pursuant to Regulation II shall be reported but not incur a fee for emissions so long as the owner/operator keeps separate records which allow the determination of emissions from such non-permitted equipment.

    (3) An owner/operator shall not pay a fee for emissions from the use of Clean Air Solvents issued a valid Certificate from the District so long as the facility submits separate records which allow the determination of annual emissions, usage, and identification of such products. A copy of the Clean Air Solvent certificate issued to the manufacturer or distributor shall be submitted with the separate records.

    (4) Emission Fee Thresholds
    Each facility shall be assessed a fee, as prescribed in Table III, for every ton per year (TPY) of emissions greater than or equal to the threshold amount of the contaminant(s) listed below:

    Air contaminant(s)  Annual emissions threshold (TPY) 
    Gaseous sulfur compounds 

    (expressed as sulfur dioxide) 

    >=4 TPY 
    Total organic gases 

    (excluding methane, specific organic gases, and contaminants listed in Table IV), 

    >=4 TPY 
    Specific organic gases  >=4 TPY 
    Oxides of nitrogen 

    (expressed as nitrogen dioxide) 

    >=4 TPY 
    Total particulate matter 

    (excluding particulate toxic air contaminants listed in Table IV) 

    >=4 TPY 
    Carbon monoxide  >=100 TPY
     

    (5) Clean Fuels Fee Thresholds
    Each source emitting 250 tons or more per year (>250 TPY) of any of the above referenced contaminants shall pay an annual clean fuels fee as prescribed in Table V (California Health and Safety Code Section 40512).

    (6) Each source emitting a toxic air contaminant or ozone depleter as listed in Table IV shall be assessed an annual operating permit emissions fee as indicated therein.

    (7) Declaration of Total Emissions from Preceding Reporting Period and Unreported or Under-reported Emissions from Prior Reporting Periods (8) Notice to Pay and Late Filing Penalties (9) Semi-Annual Emissions Fee Payment (10) Acceptance of a fee payment does not constitute validation of the emission data.

    (11) Beginning with the reporting period of July 1, 1995 to June 30, 1996, and for subsequent reporting periods, emissions of acetone, ethane, parachlorobenzotrifluoride (PCBTF), and volatile methylated siloxanes (VMS), shall not be subject to the requirements of Rule 301(e).

(f) Certified Permit Copies and Reissued Permits
A request for a certified permit copy shall be made in writing by the permittee after the destruction, loss, or defacement of a permit. A request for a permit to be reissued shall be made in writing by the permittee where there is a name or address change without a change of operator or location. The permittee shall, at the time a written request is submitted, pay the fees to cover the cost of the certified permit copy or reissued permit as follows:
    (1) A fee of $13.90 shall be paid for a certified permit copy.
    (2) A fee of $107.10 shall be paid for a reissued permit.
    No fee shall be assessed to reissue a permit to correct an administrative error by District staff.
(g) Reinstating Expired Applications or Permits
    (1) An application which has been filed but which has expired due to non-payment of fees may be reinstated by submitting a request for reinstatement of the application accompanied by a reinstatement fee and payment in full of the amount of fees due at the time the application expired. The reinstatement fee shall be fifty percent (50%) of the amount of fees due per equipment at the time the application expired, or the following amount, whichever is lower.
    Facility Permit Holders  $107.10 per equipment 
    Other Permit Holders  $107.10 per equipment
     

    Payment of all overdue fees and the reinstatement fee shall accompany the request for reinstatement. Such request and payment of such fees shall be made within ninety (90) days of the date of expiration. If the period of expiration has exceeded ninety (90) days or the affected equipment has been altered, a new application shall be required.

    (2) A Permit to Operate which has expired due to nonpayment of fees may be reinstated by submitting a request for reinstatement of the Permit to Operate accompanied by a reinstatement fee and payment in full of the amount of fees due at the time the permit expired, and corresponding fees for each year, plus any applicable penalties pursuant to Rule 301 (e)(8). The reinstatement fee shall be fifty percent (50%) of the amount of fees due per equipment at the time the permit expired, or the following amount, whichever is lower:

    Facility Permit Holders  $107.10 per equipment 
    Other Permit Holders  $107.10 per equipment
     

    Such request and payment shall be made within six months of the date of expiration. A Permit to Operate which has expired due to nonpayment of fees shall not be reinstated if the affected equipment has been altered since the expiration of the permit. If the period of expiration has exceeded six months or the affected equipment has been altered, operation of the equipment shall require a new Permit to Operate.

(h) Reinstating Revoked Permits
If a Permit to Operate is revoked for nonpayment of annual permit fees based on emissions, it may be reinstated upon payment by the permit holder of such overdue fees and accrued late fees in accordance with (e)(8).

(i) Special Processing Fees - California Environmental Quality Act (CEQA) Documentation Preparation, Air Quality Analysis, Health Risk Assessment, and Public Notice on Significant Projects

    (1) Payment for CEQA Documentation Preparation

    When a determination is made by the Executive Officer that the District is the Lead Agency for a project, pursuant to the California Environmental Quality Act (CEQA), Public Resources Code Section 21000 et seq., state CEQA Guidelines (14 California Code of Regulations section 15000 et seq.) and the District CEQA Guidelines, the project applicant may be required to pay a deposit for the preparation, review, and notice of all necessary CEQA documentation reflecting actual costs. In such a case the applicant shall make a deposit toward total fees according to the following schedule:

    Notice of Exemption  $627.90 
    Negative Declaration  $2,511.60 
    Mitigated Negative Declaration  $2,511.60 
    Environmental Impact Report (EIR)  $3,348.80 
    Supplemental, Subsequent or Addendum to EIR  $3,348.90
     

    If the Executive Officer determines that CEQA preparation and review costs are less than the deposit, the District shall refund the difference to the project applicant. If the Executive Officer determines that the District's CEQA preparation and review costs exceed the deposit and in cases where no deposit is required because the District-approved CEQA documentation is provided by the applicant's consultant, the project applicant shall make periodic payment of monies into the CEQA account. The Executive Officer shall determine the amount and timing of such periodic payments, based upon the level of CEQA analysis and the amount of monies needed to offset the actual preparation and review costs.

    (2) Payment for Air Quality Analysis
    When a determination is made by the Executive Officer that an air quality analysis of the emissions from any source is necessary to predict the extent and amount of air quality impact prior to issuance of a permit, the Executive Officer may order air quality simulation modeling by qualified District personnel. Alternatively, the Executive Officer may require (or the owner/operator of the source may elect) that modeling be performed by the owner/operator or an independent consultant.
    Where modeling is performed by the owner/operator or an independent consultant, the Executive Officer may require that the results be verified by qualified District personnel. The owner/operator of the source shall provide to the Executive Officer a copy of the final modeling report including all input data, description of methods, analyses, and results. The owner/operator of the source modeled by District personnel shall pay a fee as specified in Table II to cover the costs of the modeling analysis. A fee, as specified in Table II, shall be charged to offset the cost of District verification of modeling performed by an independent consultant.

    (3) Payment for Health Risk Assessment

    (4) Payment for Public Notice on Significant Projects
    An applicant for a significant project, as defined in Rule 212(c) may be assessed a fee for preparation of the notice required by that rule. The amount of the fee shall be as specified in Table II.

    (5) Payment for Review of Continuous Emissions Monitoring System (CEMS), Fuel Sulfur Monitoring System (FSMS), and Alternative Continuous Emissions Monitoring System (ACEMS)

    Failure to pay the fees described in this subdivision within thirty (30) days after their due date(s) shall result in expiration of pending applications, and no further applications will be accepted from the applicant until the fees have been paid in full.
(j) Request for Time Extension of Payment Due
Whenever this rule requires fees to be paid by a certain date to avoid expiration, cancellation, or the imposition of an increased fee for late payment, the Executive Officer may, for good cause, grant an extension of time, not to exceed one hundred eighty (180) days, within which the fee payment shall be made. Any request for an extension of time hereunder shall be made in writing and accompanied by a statement of reasons why the extension should be granted.

(k) Adjustment of Fees
The Executive Officer may, upon finding an administrative error by District staff regarding the calculation, imposition, noticing, invoicing, and/or collection of any fee set forth in this rule, rescind, reduce, increase, or modify such fee. Any request for such relief from an administrative error shall be received by the District in writing prior to the expiration date of notification of the amount due, accompanied by a statement of why such relief should be granted.

(l) Refunds

    (1) If an application for a permit is canceled, permit processing fees, less the application cancellation fee, will be refunded: (2) The application cancellation fee will be $107.10, or the permit fee set forth in the Summary Permit Fee Rates tables, whichever is less.

    (3) Claims for refund of any fee required by this rule shall be submitted in writing within one (1) year after the fee was paid, or three (3) years in the case of District errors, which shall not include revisions to applicable emissions factors used to calculate annual operating permit emissions fees.

    (4) The cancellation fee shall not apply when the application was filed based on an erroneous District request.

(m) Fee Waivers and Reductions
    (1) On or after January 1, 1996, the District shall, from the date the first application is received, waive annual operating permit renewal fees required by subdivision (d) above for the first two annual renewals of a new manufacturing facility that locates within the South Coast Air Basin and creates five hundred (500) or more new full-time jobs with total facility NOx, SOx, VOC, or PM10 emissions per full-time employee equal to or less than one-half (1/2) of any emission per employee target ratio for the industry class for the Year 2010 stated in the Air Quality Management Plan. After the first two annual renewal fee waiver time periods, the owner/operator shall be liable for all applicable fees set forth in subdivision (d) above.

    (2) A request for a fee waiver or reduction shall be made in the manner prescribed on forms provided by the Executive Officer. The Executive Officer may request supporting documentation of such a request. If the owner/operator, at any time during the applicable fee waiver or reduction time period, does not operate the facility in a manner consistent with all applicable District rules, the Executive Officer may take action to rescind the fee waiver or reduction.

(n) Government Agencies
All applicants and permittees, including federal, state, or local governmental agencies or public districts, shall pay all fees.

(o) RECLAIM Facilities

    (1) For RECLAIM facilities, this subdivision specifies additional conditions and procedures for assessing the following fees: (2) All RECLAIM Facility Permit holders shall be subject to this subdivision.

    (3) Unless specifically stated, all RECLAIM Facility Permit holders shall be subject to all other provisions of Rule 301 - Permit Fees.

    (4) Facility Permit Fees

    (5) Facility Permit Amendment
    At the time of filing an application for an addition, alteration or modification to a Facility Permit that requires an engineering evaluation or causes a change in emissions, a Facility Permit Amendment Fee shall be paid. Such fee shall be equal to the sum of applicable fees assessed for each affected equipment as specified in the Summary Permit Fee Rates tables.

    (6) Change of Operating Condition
    At the time of filing an application for a Change of Operating Conditions that requires engineering evaluation or causes a change in emissions, a Change of Condition Fee shall be paid. Such fee shall be equal to the sum of fees assessed for each equipment subject to the change of condition as specified in the Summary Permit Fee Rates - Permit and ERC Processing, Change of Conditions, Alteration/Modification table.

    (7) Fee for Change of Operator
    The Permit Processing Fee for a change of operator of a RECLAIM facility permit shall be determined by the number of equipment items listed in the Facility Permit, corresponding to the Number of Equipment in the Table Summary Permit Fee Rates - Change of Operator, Non-Small Business (all Schedules except A1).

    (8) Annual Operating Permit Renewal Fee

    (9) Transaction Registration Fee
    The transferor and transferee of an RTC shall jointly register the transaction with the District pursuant to District Rule 2007 - Trading Requirements. The transferee shall pay a Transaction Registration Fee of $52.40 at the time the transaction is registered with the District.

    (10) RECLAIM Pollutant Emission Fee
    At the end of the time period of July 1 through June 30, RECLAIM facilities shall pay a RECLAIM Pollutant Emission Fee based on the facilities’ total certified RECLAIM pollutant emissions. For facilities emitting ten (10) tons per year or more of any contaminant the previous year, the Facility Permit holders shall pay a semiannual installment equal to one half (1/2) of the total estimated fee with final balance due at the end of the period of July 1 through June 30.

    (11) Certified Permits Copies
    A request for a certified copy of a Facility Permit shall be made in writing by the permittee. The permittee shall, at the time the written request is submitted, pay $13.90 for the first page and $1.00 for each additional page in the Facility Permit.

    (12) Reissued Permits
    A request for a reissued Facility Permit shall be made in writing by the permittee where there is a name or address change without a change of operator or location, or for an administrative change in permit description, which do not require any engineering evaluation, and do not cause a change in emissions. The permittee shall, at the time the written request is submitted, pay $107.10 for the first page plus $1.00 for each additional page in the facility permit.

    (13) Breakdown Emission Report Evaluation Fee
    The Facility Permit Holder, submitting a Breakdown Emission Report to seek exclusion of excess emissions from the annual allocations pursuant to Rule 2004 - Requirements, shall pay fees for the evaluation of a Breakdown Emission Report. The Facility Permit Holder shall pay a filing fee of $80.30 at the time of filing of a Breakdown Emission Report, and shall be assessed an evaluation fee at the rate of $80.30 per hour.

    (14) Breakdown Emission Fee
    At the end of the time period from July 1 through June 30, the Facility Permit holder shall pay a Breakdown Emission Fee for excess emissions determined pursuant to District Rule 2004 - Requirements. The Facility Permit Holder shall include excess emissions to the total certified RECLAIM emissions to determine the appropriate RECLAIM Pollutant Emission Fee.

    (15) Mitigation of Non-Tradeable Allocation Credits
    Upon submitting a request to activate non-tradeable allocation credits pursuant to District Rule 2002(h), the RECLAIM Facility Permit Holder shall pay a mitigation fee of $5,358.90 per ton of credits requested plus a non-refundable $53.50 processing fee.

    (16) Evaluation Fee to Increase an Annual Allocation to a Level Greater than a Facility’s Starting Allocation Plus Non-Tradable Credits
    The Facility Permit Holder submitting an application to increase an annual Allocation to a level greater than the facility’s starting allocation plus non-tradable credits pursuant to Rule 2005 - New Source Review shall pay fees for the evaluation of the required demonstration specified in Rule 2005(c)(3). The Facility Permit Holder shall pay an evaluation fee at the rate of $80.30 per hour.

(p) Title V Facilities
    (1) The requirements of this subdivision apply only to facilities that are subject to the requirements of Regulation XXX - Title V Permits.

    (2) All Title V facilities shall be subject to all other provisions of Rule 301 - Permit Fees, except as provided for in this subdivision.

    (3) Permit Processing Fees for Existing Facilities with Existing District Permits Applying for an Initial Title V Facility Permit

    (4) The permit processing fee for a new facility required to obtain a Title V facility permit to construct shall be the sum of all the applicable fees in subdivisions (c) and (i) for all equipment at the facility.

    (5) The permit processing fee for a facility required to obtain a Title V facility permit because of a modification, pursuant to paragraph (c)(2) of Rule 3001, shall be those specified in paragraph (p)(3) plus the sum of all the applicable fees in subdivisions (c) and (i) for all new and modified equipment at the facility.

    (6) Notwithstanding paragraphs (o)(5), (o)(6), (o)(9), and (q)(3), and except as provided in paragraphs (o)(7), (o)(12), (q)(3), (q)(5) and (q)(8), the permit processing fee for an administrative permit revision shall be the Schedule A fee of $304.20.

    (7) The permit processing fees for a minor permit revision, de minimis significant permit revision or a significant permit revision shall be $107.10 plus the applicable fee in paragraphs (o)(5), (o)(6), (q)(3), and (q)(4).

    (8) The fees for renewal of a Title V Facility Permit, at the end of the term specified on the permit, shall be an initial processing fee paid when the application is submitted; and a final fee per hour for time spent on the application in excess of 5 hours, due upon notification by the District of the amount due when the permit is issued, as follows:

    Prior to July 1, 1999
    On and After July 1, 1999
    Initial processing fee  $281.00  $562.10 
    Final fee
    $40.10 per hour  $80.30 per hour
     

    (9) The holder of, or applicant for, a Title V permit shall, upon notification by the District of the amount due, pay the costs incurred by the District to issue a public notice.

    (10) The holder of, or applicant for, a Title V permit shall, upon notification by the District of the amount due, pay fees of $1607.60 plus $535.70 per hour for a public hearing held on a permit action.

    (11) Application Cancellation
    If a Title V permit application is canceled, the applicant shall pay, upon notification of the amount due, a final fee in accordance with this subdivision. The District shall refund the initial fee only if evaluation of the application has not been initiated.

    (12) Notice of Amount Due and Nonpayment Penalties
    For fees due upon notification, such notice may be given by personal service or by deposit, postpaid, in the United States mail and shall be due thirty (30) days from the date of personal service or mailing. For the purpose of this paragraph, the fee payment will be considered to be received by the District if it is postmarked by the United States Postal Service on or before the expiration date stated on the billing notice. If the expiration date falls on a Saturday, Sunday, or a state holiday, the fee payment may be postmarked on the next business day following the Saturday, Sunday, or the state holiday with the same effect as if it had been postmarked on the expiration date. Nonpayment of the fee within this period of time will result in permit expiration or revocation of the subject permit(s) in accordance with subdivision (f) of Rule 3002. No further applications will be accepted from the applicant until such time as overdue permit processing fees have been fully paid.

(q) All Facility Permit Holders
    (1) The requirements of this subdivision apply to all non-RECLAIM holders of a Facility Permit.

    (2) All non-RECLAIM Facility Permit holders or applicants shall be subject to all other provisions of Rule 301 - Permit Fees, except as provided for in this subdivision.

    (3) Facility Permit Revision
    Except as provided in paragraphs (p)(7) and (p)(8), the permit processing fee for an addition, alteration or revision to a Facility Permit that requires engineering evaluation or causes a change in emissions shall be the sum of applicable fees assessed for each affected equipment as specified in subdivisions (c) and (i).

    (4) Change of Operating Condition
    The permit processing fee for a Change of Operating Condition that requires engineering evaluation or causes a change in emissions shall be the sum of fees assessed for each equipment or process subject to the change of condition as specified in subdivisions (c) and (i).

    (5) Fee for Change of Operator
    The permit processing fee for a change of operator of a facility permit shall be determined by the number of processes listed in the Facility Permit, corresponding to the number of Equipment/processes in the Table "Summary Permit Rates - Change of Operator", Non-Small Business, All Schedules except A1.

    (6) Annual Operating Permit Renewal Fee

    (7) Certified Permits Copies
    A request for a certified copy of a Facility Permit shall be made in writing by the permittee. The permittee shall, at the time a written request is submitted, pay $13.90 for the first page and $1.00 for each additional page in the facility permit.

    (8) Reissued Permits
    A request for a reissued Facility Permit shall be made in writing by the permittee where there is a name or address change without a change of operator or location, or for an administrative change in permit description or a change in permit conditions to reflect actual operating conditions, which do not require any engineering evaluation, and do not cause a change in emissions. The permittee shall, at the time a written request is submitted, pay $107.10 for the first page plus $1.00 for each additional page in the Facility Permit.

(r) Asbestos Fees
Any person who is required by District Rule 1403 - Asbestos Emissions from Demolition/Renovation Activities to submit a written notice of intention to demolish or renovate shall pay at the time of delivery of notification, the Asbestos and Lead Fees specified in Table VI of this rule. Fees are per notification and multiple fees may apply. No notification shall be considered received pursuant to Rule 1403, unless it is accompanied by the required payment.

(s) Lead Abatement Notification Fees
A person who is required by a federal or District rule to submit written notice of intent to abate lead shall, at the time of delivery of notification, pay the appropriate renovation and abatement fee specified in Table VI of this rule. Fees are per notification and multiple fees may apply. No notification shall be considered received unless it is accompanied by the required payment.

(t) NESHAP Evaluation Fee

    (1) At the time of filing an application for a Change of Operating Conditions submitted solely to comply with the requirements of a NESHAP, a NESHAP Evaluation Fee shall be paid. The fee shall be $167.40. Additional fees shall be assessed at a rate of $80.30 per hour for time spent in the evaluation in excess of two (2) hours, to a maximum total fee not to exceed the applicable Change of Conditions Fees listed for each affected piece of equipment as specified in the Summary Permit Fee Rates - Permit and ERC Processing, Change of Conditions, Alteration/Modification table.

    (2) Payment of all applicable fees shall be due in thirty (30) days from the date of personal service or mailing of the notification of the amount due. Non-payment of the fees within this time period will result in expiration of the permit. For the purpose of this paragraph, the fee payment will be considered to be received by the District if it is postmarked by the United States Postal Service on or before the expiration date stated on the billing notice. If the expiration date falls on a Saturday, Sunday, or a state holiday, the fee payment may be postmarked on the business day following the Saturday, Sunday, or the state holiday, with the same effect as if it had been postmarked on the expiration date. No further applications will be accepted until such time as all overdue fees have been fully paid.

(u) Fees for Certification of Clean Air Solvents
Persons applying for Clean Air Solvent certification shall pay the following fee for each product to be certified:
Gas Chromatograph/Mass 
Spectrometry Analysis 
$214.30 for five or fewer compounds 
$21.20 for each additional compound 
Density measurement  $80.30 
Time and material  $80.30 per person per hour or prorated portion thereof 
Clean Air Solvent Certificate  $102.20
 

At the time of filing for a Clean Air Solvent certificate, the applicant shall submit a fee of $511.00 for each product to be tested. Adjustments, including refunds or additional billings, shall be made to the submitted fee as necessary. A Clean Air Solvent Certificate shall be valid for five (5) years from the date of issuance and shall be renewed upon the determination of the Executive Officer that that the product(s) containing a Clean Air Solvent continue(s) to meet Clean Air Solvent criteria, and has not been reformulated. After five (5) years from the date of Clean Air Solvent certificate issuance, a renewal fee of $102.20 shall be charged for the reissuance of the Clean Air Solvent Certificate to applicants whose products continue to meet Clean Air Solvent criteria.

(v) All Facility Registration Holders

    (1) The requirements of this subdivision apply to all holders of a Facility Registration.

    (2) Unless specifically stated otherwise, all Facility Registration holders shall be subject to all other provisions of Rule 301 - Permit Fees.

    (3) Existing facilities entering the Facility Registration Program shall pay no fee if no changes are initiated by actions of the permittee to the existing permit terms or conditions or to the draft Facility Registration prepared by the District.

    (4) Duplicate of Facility Registrations
    A request for a duplicate of a Facility Registration shall be made in writing by the permittee. The permittee shall, at the time a written request is submitted, pay $13.90 for the first page and $1.00 for each additional page in the Facility Registration.

    (5) Reissued Facility Registrations
    A request for a reissued Facility Registration shall be made in writing by the permittee where there is a name or address change without a change of operator or location, or for an administrative change in permit description or a change in permit conditions to reflect actual operating conditions, which do not require any engineering evaluation, and do not cause a change in emissions. The permittee shall, at the time a written request is submitted, pay $107.10 for the first equipment listed in the Facility Registration plus $1.00 for each additional equipment listed in the Facility Registration.

(w) Service Charge for Returned Check
Any person who submits a check to the District on insufficient funds or on instructions to stop payment on the check, absent an overcharge or other legal entitlement to withhold payment, shall be subject to a $25.50 service charge.

(x) Fees for non-permitted emission sources subject to Rule 222

    (1) Initial filing fee
    Upon adoption of Rule 222, at the time specified in Rule 222 each owner/operator of an emission source subject to Rule 222 shall pay to the District a non-refundable filing and processing fee of $100 per source. When an emission source is built, erected, installed, or replaced without the owner/operator filing a Rule 222 application, the processing fee assessed shall be 150 percent (150%) of the initial filing fee.

    (2) Change of operator fee
    A fee of $100 shall be charged to a person applying for a Change of Operator for a source subject to Rule 222.

    (3) Annual renewal fee
    On the annual renewal date set by the Executive Officer, the owner/operator of a source subject to Rule 222 shall pay a renewal fee of $100 for each source subject to that rule.

(y) Optional express permit processing fee
Fees for requested express processing of permit applications will be based upon processing time billed at the staff overtime rate of $120.40 per hour. A deposit of the established permit application fees found in the applicable permit fee tables shall be paid at the time of filing with the remainder billed following permit issuance. Fees are due at the time specified in the bill which will allow a reasonable time for payment. This proposal is contingent upon the ability of the District to implement the necessary policies and procedures and the availability of qualified staff for overtime permit processing.
SUMMARY PERMIT FEE RATES -
PERMIT AND ERC PROCESSING, CHANGE OF CONDITIONS,
ALTERATION/MODIFICATION
Schedule  Permit and ERC Processing Fee  Change of Condition  Alteration/ 

Modification 

$304.20  $257.10  $304.20 
A1  $175.60  $175.60  $175.60 
$772.70  $608.70  $608.70 
B1  $1,989.20  $1,053.40  $1,241.00 
$1,989.20  $1,053.40  $1,241.00 
$4,330.00  $1,801.50  $2,222.70 
$8,542.10  $2,645.00  $3,487.40 
$15,095.00  $3,861.60  $4,609.70 
$25,861.30  $6,552.80  $7,840.10 
$32,882.60  $8,308.40  $9,946.20 
$1,989.20  $0.00  $351.40
 
SUMMARY PERMIT FEE RATES -
CHANGE OF OPERATOR
Small Business  Non-Small Business 
Number of Equipment  Schedule A1 Only  All Schedules  
except A1 
Schedule A1 Only  All Schedules  
except A1 
$107.10  $107.10  $175.60  $267.80 
2 - 5  $140.50  $213.90  $351.40  $535.70 
6 - 9  $291.60  $434.10  $712.00  $1,085.50 
10 - 15  $426.40  $650.20  $1,067.60  $1,627.70 
16 - 20  $569.50  $868.30  $1,424.10  $2,171.00 
21 and over  $711.40  $1,084.30  $1,779.90  $2,713.30
 
Equipment/Process  Schedule 
Activated Carbon Adsorber, Venting Single Source (s.s.=single source) 
Activated Carbon Adsorber, Venting Multiple Source (m.s.=multiple sources) 
Activated Carbon Adsorber, Other 
Activated Carbon Adsorber, Drum Venting Toxic Source (t.s.) 
Afterburner (<1 MMBTU/hr,venting s.s.) 
Afterburner (<1 MMBTU/hr,venting m.s.) 
Afterburner, Catalytic for Bakery Oven 
Afterburner, Direct Flame 
Afterburner, Hot Rock Bed Type 
Afterburner, Catalytic 
Air Filter, Custom 
Amine (or DEA) Regeneration Unit [] 
Amine Treating Unit [] 
Baghouse, Ambient (>500 FT2
Baghouse, Ambient (<=100 FT2
Baghouse, Ambient (>100-500 FT2
Baghouse, Hot 
Biofilter (<= 100 cfm) 
Biofilter (> 100 cfm) 
Boiler as Afterburner 
CO Boiler 
Condenser 
Cyclone 
Dry Filter (>500 FT2
Dry Filter (<=100 FT2
Dry Filter (>100-500 FT2
Electrostatic Precipitator, Restaurant 
Electrostatic Precipitator, Asphalt Batch Equipment 
Electrostatic Precipitator, Extruder 
Electrostatic Precipitator, < 3000 CFM 
Electrostatic Precipitator, >= 3000 CFM 
Electrostatic Precipitator for Fluid Catalytic Cracking Unit (FCCU) 
Ethylene Oxide Sterilization, Control, Hospital 
Flare, Enclosed Landfill/Digester Gas 
Equipment/Process  Schedule 
Flare, Open, Landfill/Digester Gas 
Flare, Other 
Flare, Portable 
Flare System, Refinery [ Including, but not limited to, all or part of the following: Accumulators, Columns, Condensers, Drums, Heat Exchangers, Knock Out Pots, Pots, Pumps, Regenerators, Scrubbers, Settling Tanks, Sumps, Tanks, Towers, Vessels, 2 Including, but not limited to, all or part of the following: Flare, Compressors, Drums, Knock Out Pots, Pots, Vessels...] 
Flue Gas Desulfurization1 
Gas Absorption Unit [ Including, but not limited to, all or part of the following: Accumulators, Columns, Condensers, Drums, Heat Exchangers, Knock Out Pots, Pots, Pumps, Regenerators, Scrubbers, Settling Tanks, Sumps, Tanks, Towers, Vessels, ] 
Gas Scrubbing System1 
Incinerator, Afterburner 
Mesh pads, for toxics gas stream 
Mesh pads, for other acid mists 
Mist Control 
Mist Eliminator with HEPA 
Negative Air Machine/HEPA, Asbestos, Lead 
Abatement System/HEPA, Asbestos, Lead 
Dust Collector/HEPA, other Rule 1401 toxics 
Non-Selective Catalytic Reduction 
Odor Control Unit 
Relief and Blowdown System [ Including, but not limited to, all or part of the following: Compressors, Drums, Knock Out Pots, Pots,] 
Scrubber, Biofiltration 
Scrubber Controlling NOx venting 
Scrubber Controlling SOx venting 
Scrubber Controlling HCL or NH3 venting s.s. 
Scrubber Controlling HCL or NH3 venting m.s. 
Scrubber, NOx, multistage 
Scrubber, NOx, single stage 
Scrubber, Odor, <5000 cfm 
Scrubber, Other venting s.s.
Scrubber, Other venting m.s. 
Scrubber, Other Chemical venting s.s. 
Scrubber, Other Chemical venting m.s. 
Scrubber, Particulates venting s.s. 
Scrubber, Particulates venting m.s. 
Scrubber, Particulates venting t.s. 
Scrubber, Restaurant 
Scrubber, Toxics venting 
Scrubber, Venturi venting s.s. 
Scrubber, Venturi venting m.s. 
Equipment/Process  Schedule 
Scrubber, Venturi venting t.s. 
Scrubber, Water (no packing) 
Selective Catalytic Reduction (SCR) 
Settling Chamber 
Ship Hold Hatch Cover 
Slop Oil Recovery System 
Sour Water Oxidizer Unit [ Including, but not limited to, all or part of the following: Accumulators, Columns, Drums, Knock Out Pots, Tanks, Vessels, ] 
Sour Water Stripper [ Including, but not limited to, all or part of the following: Condensers, Coolers, Drums, Sumps, Vessels, ] 
Sparger 
Spent Acid Storage & Treating Facility [ Including, but not limited to, all or part of the following: Accumulators, Clarifier, Columns, Compressors, Condensers, Drums, Filters, Filter Presses, Heat Exchangers, Knock Out Pots, Pits, Pots, Pumps, Reactors, Regenerators, Scrubbers, Settling Tanks, Sumps, Tanks, Towers, Vessels, ] 
Spent Carbon Regeneration System 
Spent Caustic Separation System [ Including, but not limited to, all or part of the following: Process Tanks, Separators, Tanks, ] 
Spray Booth, Wet Coating Gun Spray (with single or multiple APC) 
Spray Booth/Enclosure, Powder Coating (with single or multiple APC) 
Spray Booth, Metallizing 
Storm Water Handling & Treating System [ Including, but not limited to, all or part of the following: Air Floatation Units, Floatation Units, Filter Presses, Clarifiers, Settling Tanks, Waste Water Separators, Tanks, ] 
Sulfur Recovery Equipment7 
Tail Gas Incineration 
Tail Gas Unit [0 Including, but not limited to, all or part of the following: Absorbers, Condensers, Coolers, Drums, Heat Exchangers, Knock Out Pots, Reactors, Tanks, Vessels] 0 
Tank Degassing Unit 
Ultraviolet Oxidation 
Vapor Balance System [1 Including, but not limited to, all or part of the following: Absorbers, Compressors, Condensers, Knock Out Pots, Pumps, Saturators, ] 1 
Vapor Recovery, Serving Crude Oil Production11  E 
Vapor Recovery, Serving Refinery Unit11 
Waste Gas Incineration Unit  E
 
Equipment/Process  Schedule 
Abatement System, Asbestos, Lead 
Abrasive Blasting (Cabinet, Mach., Room) 
Abrasive Blasting (Open) 
Absorption Chillers (Gas-Fired), < 5 MM Btu/hr 
Absorption Chillers (Gas-Fired), >= 5 MM Btu/hr 
Acetylene Purification System 

Including, but not limited to, all or part of the following: Absorbers, Accumulators, Columns, Compressors, Condensers, Drums, Heat Exchangers, Knock Out Pots, Pots, Pumps, Reactors, Regenerators, Scrubbers, Settling Tanks, Sumps, Tanks, Towers, Vessels, ... 

Acid Treating 

Including, but not limited to, all or part of the following: Absorbers, Accumulators, Columns, Compressors, Condensers, Drums, Heat Exchangers, Knock Out Pots, Pots, Pumps, Reactors, Regenerators, Scrubbers, Settling Tanks, Sumps, Tanks, Towers, Vessels, ... 

Adhesives Organic Additions 

Including, but not limited to, all or part of the following: Reactors, Mixers, Process Tanks, Vessels, ... 

Adsorption Chillers (Gas-Fired), < 5 MM Btu/hr 
Adsorption Chillers (Gas-Fired), >= 5 MM Btu/hr 
Adsorption, Other 
Aeration Potable Water 
Aggregate, Tank Truck Loading/Conveying 

Including, but not limited to, all or part of the following: Bins, Bucket Elevators, Conveyors, Feeders, Hoppers, Weigh Stations, ... 

Aggregate Production, with Dryer 

Including, but not limited to, all or part of the following: Bins, Bucket Elevators, Conveyors, Dryers, Feeders, Hoppers, Crushers, Cyclones, Log Washers, Mixers, Screens, Vibrating Grizzlies, Weigh Stations, ... 

E
 
Equipment/Process  Schedule 
Aggregate Production/Crushing (<5000 tpd) 

Including, but not limited to, all or part of the following: Bins, Bucket Elevators, Conveyors, Feeders, Hoppers, Crushers, Cyclones, Log Washers, Mixers, Screens, Vibrating Grizzlies, Weigh Stations, ... 

Aggregate Production/Crushing (>=5000) 

Including, but not limited to, all or part of the following: Bins, Bucket Elevators, Conveyors, Feeders, Hoppers, Crushers, Cyclones, Log Washers, Mixers, Screens, Vibrating Grizzlies, Weigh Stations, ... 

Aggregate Screening 

Including, but not limited to, all or part of the following: Bins, Bucket Elevators, Conveyors, Feeders, Hoppers, Cyclones, Screens, Weigh Stations, ... 

Air Strippers 
Aircraft Fueling Facility 

Including, but not limited to, all or part of the following: Storage Tanks, Dispensing Nozzles,... 

Alkylation Unit 

Including, but not limited to, all or part of the following: Absorbers, Accumulators, Columns, Compressors, Condensers, Drums, Heat Exchangers, Knock Out Pots, Pots, Pumps, Reactors, Regenerators, Scrubbers, Settling Tanks, Sumps, Tanks, Towers, Vessels, ... 

Ammonia Mfg. 

Including, but not limited to, all or part of the following: Absorbers, Accumulators, Columns, Compressors, Condensers, Coolers, Drums, Ejectors, Heat Exchangers, Knock Out Pots, Pots, Pumps, Reactors, Regenerators, Scrubbers, Settling Tanks, Sumps, Tanks, Towers, Vessels, ... 

Ammonia Vaporization Unit 

Including, but not limited to, all or part of the following: Absorbers, Accumulators, Columns, Compressors, Condensers, Coolers, Drums, Ejectors, Heat Exchangers, Knock Out Pots, Pots, Pumps, Reactors, Regenerators, Scrubbers, Settling Tanks, Sumps, Tanks, Towers, Vessels, ... 

C
 
Equipment/Process  Schedule 
Animal Feed Processing, Conveying 

Including, but not limited to, all or part of the following: Conveyors, Bins, Hoppers, Bucket Elevators, ... 

Animal Feed Processing, Other 

Including, but not limited to, all or part of the following: Conveyors, Bins, Hoppers, Bucket Elevators, Mixers, Feeders, Grinders, ... 

Anodizing (sulfuric, phosphoric) 
Aqueous Ammonia Transfer & Storage 
Aromatics Recovery Unit 

Including, but not limited to, all or part of the following: Absorbers, Accumulators, Columns, Compressors, Condensers, Drums, Heat Exchangers, Knock Out Pots, Pots, Pumps, Reactors, Regenerators, Scrubbers, Settling Tanks, Sumps, Tanks, Towers, Vessels, ... 

Asphalt Air Blowing 
Asphalt Blending/Batching 

Including, but not limited to, all or part of the following: Bins, Bucket Elevators, Conveyors, Cyclones, Dryers, Feeders, Hoppers, Knock Out Pots, Mixers, Screens, Tanks, Weigh Stations, ... 

Asphalt Coating 
Asphalt Day Tanker/Tar Pot 
Asphalt Refining 

Including, but not limited to, all or part of the following: Absorbers, Accumulators, Columns, Compressors, Condensers, Drums, Heat Exchangers, Knock Out Pots, Pots, Pumps, Reactors, Regenerators, Scrubbers, Settling Tanks, Sumps, Tanks, Towers, Vessels, ... 

Asphalt Roofing Line 

Including, but not limited to, all or part of the following: Pumps, Conveyors, Process Tanks, Coater Operations, Cutters, ... 

Asphalt Roofing Saturator 
Asphalt-Rubber Spraying 
Auto Body Shredding 
Autoclave, Non-sterilizing Type 
Battery Charging/Manufacturing 

Including, but not limited to, all or part of the following: Cutters, Crushers, Separators, Process Tanks, Conveyors, ... 

C
 
Equipment/Process  Schedule 
Benzene/Toluene/Xylene Production Equip. 

Including, but not limited to, all or part of the following: Absorbers, Accumulators, Columns, Compressors, Condensers, Drums, Heat Exchangers, Knock Out Pots, Pots, Pumps, Reactors, Regenerators, Scrubbers, Settling Tanks, Sumps, Tanks, Towers, Vessels, ... 

Beryllium Machining and Control 

Including, but not limited to, all or part of the following: Machining Operations, Filters, Baghouses, ... 

Bleach Manufacturing 

Including, but not limited to, all or part of the following: Accumulators, Columns, Com-pressors, Condensers, Drums, Heat Exchangers, Knock Out Pots, Pots, Pumps, Tanks, Towers, Vessels, ... 

Blending, Other 
Boiler/hot water heater, various locations, diesel/oil fired (<300,000 BTU/hr) 
Boiler/hot water heater, single facility, portable, diesel/oil fired (<600,000 BTU/hr) 
Boiler, Landfill/Digester Gas (>10 MMBTU/hr) 
Boiler, Landfill/Digester Gas (<=10 MMBTU/hr) 
Boiler, Other Fuel (<5MMBTU/hr) 
Boiler, Utility (>50MW) 
Boiler, Other Fuel (5 - 20 MMBTU/hr) 
Boiler, Other Fuel (> 50 MMBTU/hr) 
Boiler, Other Fuel (>20-50 MMBTU/hr) 
Brake Shoes, Grinding, Bonding and Debonding, Deriveter 
Bulk Chemical Terminal 
Bulk Loading/Unloading Stn.(< 50,000 GPD) 
Bulk Loading/Unloading Rack (> 50,000 - 200,000 GPD) 
Bulk Loading/Unloading Rack (> 200,000 GPD) 
Bulk Unloading 
Carpet Processing System 

Including, but not limited to, all or part of the following: Process Tanks, Dryers, Carpet Beaters, Carpet Shears, 

D
 
Equipment/Process  Schedule 
Catalyst Handling System 

Including, but not limited to, all or part of the following: Centrifuge, Bins, Conveyors, Hoppers, Cyclones, Screens, Tanks, Weigh Stations, ... 

Catalyst Mfg./Calcining 

Including, but not limited to, all or part of the following: Bins, Conveyors, Reactors, Mixers, Process Tanks, Kilns, ... 

Catalyst Storage (Hoppers) 
Catalytic Reforming Unit 

Including, but not limited to, all or part of the following: Absorbers, Accumulators, Columns, Compressors, Condensers, Drums, Fractionators, Heat Exchangers, Knock Out Pots, Pots, Pumps, Reactors, Regenerators, Scrubbers, Settling Tanks, Sumps, Tanks, Towers, Vessels, ... 

Caustic Treating Unit 

Including, but not limited to, all or part of the following: Knock Out Pots, Tanks, Towers, Vessels... 

Cement Marine Loading & Unloading 

Including, but not limited to, all or part of the following: Bins, Conveyors, Bucket Elevators, Hoppers, Loading & Unloading Arms, Weigh Stations, ... 

Cement Packaging 

Including, but not limited to, all or part of the following: Bins, Conveyors, Bucket Elevators, Hoppers, Weigh Stations, ... 

Cement Truck Loading 
Charbroiler, Eating Establishment 
Charbroiler with Integrated Control 
Charbroiler, Other 
Chemical Additive Injection System 

Including, but not limited to, all or part of the following: Injectors, Compressors, Pumps, ... 

Chip Dryer 
Circuit Board Etchers 
Cleaning, Miscellaneous 
Coal Bulk Loading 

Including, but not limited to, all or part of the following: Bins, Conveyors, Bucket Elevators, Hoppers, Loading Arms, Weigh Stations, ... 

E
 
Equipment/Process  Schedule 
Coal Research Pilot / Equip (0-15 MMBTU/hr) 
Coal Research Pilot / Equip (>15 MMBTU/hr) 
Coal Tar Treating 

Including, but not limited to, all or part of the following: Absorbers, Accumulators, Columns, Compressors, Condensers, Drums, Heat Exchangers, Knock Out Pots, Pots, Pumps, Reactors, Regenerators, Scrubbers, Settling Tanks, Sumps, Tanks, Towers, Vessels, ... 

Coating & Drying Equipment, Continuous Organic 

Including, but not limited to, all or part of the following: Coater Operations, Process Tanks, Dryers, ... 

Coating Line, Can/Coil 

Including, but not limited to, all or part of the following: Coater Operations, Process Tanks, Dryers, ... 

Coating Line, Paper/Fabric/Film 

Including, but not limited to, all or part of the following: Coater Operations, Process Tanks, Dryers, ... 

Coffee Roasting, 100 lb or more capacity 

Including, but not limited to, all or part of the following: Bins, Conveyors, Bucket Elevators, Hoppers, Roasters, Coolers, ... 

Coffee Roasting, 11-49 lb roaster capacity 

Including, but not limited to, all or part of the following: Bins, Conveyors, Bucket Elevators, Hoppers, Roasters, Coolers, ... 

Coffee Roasting, 50-99 lb roaster capacity 

Including, but not limited to, all or part of the following: Bins, Conveyors, Bucket Elevators, Hoppers, Roasters, Coolers, ... 

Coke Handling & Storage Facility 

Including, but not limited to, all or part of the following: Centrifuge, Bins, Conveyors, Clarifier, Hoppers, Cyclones, Screens, Tanks, Weigh Stations, ... 

E
 
Equipment/Process  Schedule 
Composting, in vessel 

Including, but not limited to, all or part of the following: Bins, Conveyors, Hoppers 

Concrete/Asphalt Crushing 

Including, but not limited to, all or part of the following: Bins, Bucket Elevators, Conveyors, Feeders, Hoppers, Crushers, Cyclones, Screens, Vibrating Grizzlies, Weigh Stations, ... 

Concrete Batch Equipment 

Including, but not limited to, all or part of the following: Bins, Bucket Elevators, Conveyors, Dryers, Feeders, Hoppers, Crushers, Cyclones, Log Washers, Mixers, Screens, Vibrating Grizzlies, Weigh Stations, ... 

Container Filling, Liquid 
Conveying, Other 
Cooling Tower, Petroleum Operations 
Cooling Tower, Other 
Core Oven 
Cotton Ginning System 

Including, but not limited to, all or part of the following: Hoppers, Conveyors, Separators, Screens, Classifiers, Mixers, ... 

Crankcase Oil, Loading and Unloading 
Crematory 
Crude Oil, Cracking Catalytic 

Including, but not limited to, all or part of the following: Absorbers, Accumulators, Columns, Compressors, Condensers, Drums, Fractionators, Heat Exchangers, Knock Out Pots, Pots, Pumps, Reactors, Regenerators, Scrubbers, Settling Tanks, Sumps, Tanks, Towers, Vessels, ... 

Crude Oil, Distillation Unit 

Including, but not limited to, all or part of the following: Absorbers, Accumulators, Columns, Compressors, Condensers, Drums, Fractionators, Heat Exchangers, Knock Out Pots, Pots, Pumps, Reactors, Regenerators, Scrubbers, Settling Tanks, Sumps, Tanks, Towers, Vessels, ... 

E
 
Equipment/Process  Schedule 
Crude Oil/Gas/Water Separation System (< 30 BPD)** 

Including, but not limited to, all or part of the following: Adsorbers, Oil Water Separators, Oil Gas Water Separators, Pits, Sumps, Tanks, Vessels, ... 

Crude Oil/Gas/Water Separation System, (>= 30 BPD & < 400 BPD)** 

Including, but not limited to, all or part of the following: Adsorbers, Oil Water Separators, Oil Gas Water Separators, Pits, Sumps, Tanks, Vessels, ... 

Crude Oil/Gas/Water Separation System, (>= 400 BPD)** 

Including, but not limited to, all or part of the following: Adsorbers, Oil Water Separators, Oil Gas Water Separators, Pits, Sumps, Tanks, Vessels, ... 

Decorating Lehr 
Decorator 
Deep-Fat Fryer 
Dehydration Unit 

Including, but not limited to, all or part of the following: Absorbers, Accumulators, Columns, Compressors, Condensers, Drums, Heat Exchangers, Knock Out Pots, Pots, Pumps, Reactors, Regenerators, Scrubbers, Settling Tanks, Sumps, Tanks, Towers, Vessels, ... 

Degreaser, Cold Solvent Dipping 
Degreaser, Cold Solvent Spray 
Degreaser, (>1 lb VOC/day) 
Degreaser (VOC w/Toxics) 
Degreaser, (<=1 lb VOC/day) 
Delayed Coking Unit 

Including, but not limited to, all or part of the following: Absorbers, Accumulators, Columns, Compressors, Condensers, Drums, Fractionators, Heat Exchangers, Knock Out Pots, Pots, Pumps, Reactors, Regenerators, Scrubbers, Settling Tanks, Sumps, Tanks, Towers, Vessels, ... 

Deposition on Ceramics (< 5 pieces) 
Deposition on Ceramics (5 or more pieces)  C
 
Equipment/Process  Schedule 
Desalting Unit 

Including, but not limited to, all or part of the following: Mixers, Pumps, Reactors, Settling Tanks, Sumps, Tanks, Vessels, ... 

Die Casting Equipment 
Digester Gas Desulfurization System 

Including, but not limited to, all or part of the following: Absorbers, Accumulators, Columns, Compressors, Condensers, Drums, Heat Exchangers, Knock Out Pots, Pots, Pumps, Reactors, Regenerators, Scrubbers, Settling Tanks, Tanks, Towers, Vessels, ... 

Dip Tank, Coating 
Dip Tank, (<=3 gal/day) 
Distillation, Other 

Including, but not limited to, all or part of the following: Absorbers, Accumulators, Columns, Compressors, Condensers, Drums, Fractionators, Heat Exchangers, Knock Out Pots, Pots, Pumps, Reactors, Regenerators, Scrubbers, Settling Tanks, Sumps, Tanks, Towers, Vessels, ... 

Drilling Rig, Crude Oil Prod. 
Drop Forge 
Dry Cleaning & Associated Control Equipment 
Dryer for Organic Material 
Drying/Laundry 
Drying, Other 
Emission Reduction Credits [Rule 301(c)(4)] 
End Liner, Can 
Ethylene Oxide Sterilization, Hospital 
Evaporation, Other 
Evaporator, toxics 
Extraction - Benzene 

Including, but not limited to, all or part of the following: Absorbers, Accumulators, Columns, Compressors, Condensers, Drums, Heat Exchangers, Knock Out Pots, Pots, Pumps, Reactors, Regenerators, Scrubbers, Settling Tanks, Sumps, Tanks, Towers, Vessels, ... 

Extruder  B
 
Equipment/Process  Schedule 
Extrusion System (Multiple Units) 

Including, but not limited to, all or part of the following: Extruders, ... 

Fatty Acid Mfg. 
Feathers, Size Classification 
Feed Handling (combining conveying and loading) 
Fermentation/Brewing 

Including, but not limited to, all or part of the following: Hoppers, Conveyors, Brew Kettles, 

Fertilizer, Natural, Packaging/ Processing 

Including, but not limited to, all or part of the following: Bins, Conveyors, Bucket Elevators, Hoppers, Loading Arms, Weigh Stations... 

Fertilizer, Synthetic, Production 

Including, but not limited to, all or part of the following: Bins, Conveyors, Bucket Elevators, Mixers, Dryers, Process Tanks, Reactors, Hoppers, Loading Arms, Weigh Stations, ... 

Fiberglass Panel Mfg 

Including, but not limited to, all or part of the following: Conveyors, Mixers, Reactors, Process Tanks, Cutters, ... 

Filament Winder, Other 
Filament Winder, Rule 1401 toxics 
Filling Machine, Dry Powder 
Film Cleaner 
Flour Handling (combining conveying, packaging, and loadout) 
Flour Manufacturing (combining milling and conveying) 
Flour Milling 

Including, but not limited to, all or part of the following: Bins, Conveyors, Bucket Elevators, Hoppers, Mills, Weigh Stations, ... 

Flow Coater 
Fluid Catalytic Cracking Equipment 

Including, but not limited to, all or part of the following: Absorbers, Accumulators, Columns, Compressors, Condensers, Drums, Fractionators, Heat Exchangers, Knock Out Pots, Pots, Pumps, Reactors, Regenerators, Scrubbers, Settling Tanks, Sumps, Tanks, Towers, Vessels, ... 

Fluid Elimination, Waste Water 
Foam-in-Place Packaging  A
 
Equipment/Process  Schedule 
Fractionation Unit 

Including, but not limited to, all or part of the following: Absorbers, Accumulators, Columns, Compressors, Condensers, Drums, Fractionators, Heat Exchangers, Knock Out Pots, Pots, Pumps, Reactors, Regenerators, Scrubbers, Settling Tanks, Sumps, Tanks, Towers, Vessels, ... 

Fruit and Vegetable Treating 
Fuel Gas Mixer 
Fuel Gas, Treating 

Including, but not limited to, all or part of the following: Absorbers, Accumulators, Columns, Compressors, Condensers, Drums, Heat Exchangers, Knock Out Pots, Pots, Pumps, Scrubbers, Settling Tanks, Towers, Vessels, ... 

Fuel Storage & Dispensing Equipment (Rule 461) 

Including, but not limited to, all or part of the following: Storage Tanks, Dispensing Nozzles, ... 

Fumigation 
Furnace, Arc 
Furnace, Burn-Off, Armature 
Furnace, Burn-Off, Drum 
Furnace, Burn-Off, Engine Parts 
Furnace, Burn-Off, Other 
Furnace, Burn-Off, Paint 
Furnace, Burn-Off, Wax 
Furnace, Cupola 
Furnace, Electric, Induction and Resistance 
Furnace, Frit 
Furnace, Galvanizing 
Furnace, Graphitization and Carbonization 
Furnace, Heat Treating 
Furnace, Other Metallic Operations 
Furnace, Pot/Crucible 
Furnace, Reverberatory 
Furnace, Wire Reclamation 
Garnetting, Paper/Polyester 

Including, but not limited to, all or part of the following: Feeders, Conveyors, Condensers, Cutters, ... 

C
 
Equipment/Process  Schedule 
Gas Plant 

Including, but not limited to, all or part of the following: Accumulators, Columns, Condensers, Drums, Heat Exchangers, Knock Out Pots, Pots, Pumps, Reactors, Re-generators, Scrubbers, Settling Tanks, Sumps, Tanks, Towers, Vessels, ... 

Gas Turbine, Landfill/Digester Gas 
Gas Turbine, >50 MW, other fuel 
Gas Turbine, <=50 MW, other fuel 
Gas Turbine, Emergency, <0.3 MW 
Gas Turbine, Emergency, >=0.3 MW 
Gas-Oil Cracking Unit 

Including, but not limited to, all or part of the following: Absorbers, Accumulators, Columns, Compressors, Condensers, Drums, Fractionators, Heat Exchangers, Knock Out Pots, Pots, Pumps, Reactors, Regenerators, Scrubbers, Settling Tanks, Sumps, Tanks, Towers, Vessels, ... 

Gasoline, In-line Blending 

Including, but not limited to, all or part of the following: Absorbers, Accumulators, Columns, Compressors, Condensers, Drums, Fractionators, Heat Exchangers, Knock Out Pots, Pots, Pumps, Reactors, Regenerators, Scrubbers, Settling Tanks, Sumps, Tanks, Towers, Vessels, ... 

Gasoline, Refining 

Including, but not limited to, all or part of the following: Absorbers, Accumulators, Columns, Compressors, Condensers, Drums, Fractionators, Heat Exchangers, Knock Out Pots, Pots, Pumps, Reactors, Regenerators, Scrubbers, Settling Tanks, Sumps, Tanks, Towers, Vessels, ... 

Gasoline, Separation - Liquid Production 

Including, but not limited to, all or part of the following: Absorbers, Accumulators, Columns, Compressors, Condensers, Drums, Fractionators, Heat Exchangers, Knock Out Pots, Pots, Pumps, Reactors, Regenerators, Scrubbers, Settling Tanks, Sumps, Tanks, Towers, Vessels, ... 

D
 
Equipment/Process  Schedule 
Gasoline, Vapor Gathering System 

Including, but not limited to, all or part of the following: Absorbers, Accumulators, Columns, Compressors, Condensers, Drums, Fractionators, Heat Exchangers, Knock Out Pots, Pots, Pumps, Reactors, Regenerators, Scrubbers, Settling Tanks, Sumps, Tanks, Towers, Vessels, ... 

Gasoline Blending Unit 

Including, but not limited to, all or part of the following: Absorbers, Accumulators, Columns, Compressors, Condensers, Drums, Heat Exchangers, Knock Out Pots, Pots, Pumps, Scrubbers, Settling Tanks, Towers, Vessels, ... 

Gasoline Fractionation Unit 

Including, but not limited to, all or part of the following: Absorbers, Accumulators, Columns, Compressors, Condensers, Drums, Fractionators, Heat Exchangers, Knock Out Pots, Pots, Pumps, Reactors, Regenerators, Scrubbers, Settling Tanks, Sumps, Tanks, Towers, Vessels, ... 

Glass Forming Machine 
Glass Furnace < 1TPD 
Glass Furnace, > 50 TPD Pull 
Glass Furnace, >= 1 TPD <= 50 TPD Pull 
Grain Cleaning 

Including, but not limited to, all or part of the following: Air Classifiers, Bins, Conveyors, Bucket Elevators, Hoppers, Mills, Screens, Weigh Stations, ... 

Grain Handling (combining storage and cleaning) 
Grain Storage 
Grinder, Size Reduction 
Groundwater Treatment System 

Including, but not limited to, all or part of the following: Air Strippers, Adsorbers, Process Tanks, ... 

Gypsum, Calcining 

Including, but not limited to, all or part of the following: Air Classifiers, Bins, Conveyors, Bucket Elevators, Hoppers, Kilns, Weigh Stations, .. 

Halon/Refrigerants, Recovery and Recycling Equipment  A1
 
Equipment/Process  Schedule 
Heater, (<5 MMBTU/hr) 
Heater, (5 - 20 MMBTU/hr) 
Heater, (>20-50 MMBTU/hr) 
Heater, (>50 MMBTU/hr) 
Hot End Coating, (Glass Mfg. Plant) 
Hydrant Fueling, Petrol. Middle Distillate 

Including, but not limited to, all or part of the following: Storage Tanks, Dispensing Nozzles, ... 

Hydrocarbons, Misc., Treating 

Including, but not limited to, all or part of the following: Absorbers, Accumulators, Columns, Compressors, Condensers, Drums, Fractionators, Heat Exchangers, Knock Out Pots, Pots, Pumps, Reactors, Regenerators, Scrubbers, Settling Tanks, Sumps, Tanks, Towers, Vessels, ... 

Hydrogen Desulfurization (HDS) Unit 

Including, but not limited to, all or part of the following: Absorbers, Accumulators, Columns, Compressors, Condensers, Drums, Fractionators, Heat Exchangers, Knock Out Pots, Pots, Pumps, Reactors, Regenerators, Scrubbers, Settling Tanks, Sumps, Tanks, Towers, Vessels, ... 

Hydrogen Production Equipment 

Including, but not limited to, all or part of the following: Absorbers, Accumulators, Columns, Compressors, Condensers, Drums, Fractionators, Heat Exchangers, Knock Out Pots, Pots, Pumps, Reactors, Regenerators, Scrubbers, Settling Tanks, Sumps, Tanks, Towers, Vessels, ... 

Hydrotreating Unit 

Including, but not limited to, all or part of the following: Absorbers, Accumulators, Columns, Compressors, Condensers, Drums, Fractionators, Heat Exchangers, Knock Out Pots, Pots, Pumps, Reactors, Regenerators, Scrubbers, Settling Tanks, Sumps, Tanks, Towers, Vessels, ... 

IC Engine, (50-500 HP) Cogeneration 
IC Engine, (> 500 HP) Cogeneration 
IC Engine, Emergency, 50 - 500 HP  A
 
Equipment/Process  Schedule 
IC Engine, Emergency, >500 HP 
IC Engine, Landfill/Digester Gas 
IC Engine, Other, 50-500 HP 
IC Engine, Other, >500 HP 
Impregnating Equipment 
Incineration, Hazardous Waste 
Incinerator, < 300 lbs/hr, Non-Hazardous 
Incinerator, >=300 lbs/hr, Non-Hazardous 
Indoor Shooting Range 
Ink Mfg./Blending 

Including, but not limited to, all or part of the following: Process Tanks, Mixers, ... 

Inorganic Chemical Mfg. 

Including, but not limited to, all or part of the following: Process Tanks, Mixers, Reactors, ... 

Insecticide Separation/Mfg 

Including, but not limited to, all or part of the following: Absorbers, Accumulators, Columns, Compressors, Condensers, Coolers, Drums, Ejectors, Heat Exchangers, Knock Out Pots, Pots, Pumps, Reactors, Regenerators, Scrubbers, Settling Tanks, Sumps, Tanks, Towers, Vessels, ... 

Iodine Reaction 

Including, but not limited to, all or part of the following: Columns, Compressors, Condensers, Coolers, Heat Exchangers, Pumps, Reactors, Regenerators, Scrubbers, Settling Tanks, Tanks, Towers, ... 

Isomerization Unit 

Including, but not limited to, all or part of the following: Absorbers, Accumulators, Columns, Compressors, Condensers, Drums, Fractionators, Heat Exchangers, Knock Out Pots, Pots, Pumps, Reactors, Regenerators, Scrubbers, Settling Tanks, Sumps, Tanks, Towers, Vessels, ... 

Jet Engine Test Facility 
Kiln, Natural Gas 
Landfill Condensate/Leachate Collection/Storage 
Landfill Gas, Collection 
Landfill Gas, Treatment  E
 
Equipment/Process  Schedule 
Lime/Limestone, Conveying 

Including, but not limited to, all or part of the following: Bins, Conveyors, Bucket Elevators, Hoppers, Weigh Stations, ... 

Liquid Separation, Other 

Including, but not limited to, all or part of the following: Process Tanks, Settling Tanks, Separators, Tanks, ... 

Liquid Waste Processing, Hazardous 

Including, but not limited to, all or part of the following: Air Floatation Units, Floatation Units, Filter Presses, Reactors, Process Tanks, Clarifiers, Settling Tanks, Waste Water Separators, Tanks, ... 

Liquid Waste Processing, Non Hazardous 

Including, but not limited to, all or part of the following: Air Floatation Units, Floatation Units, Filter Presses, Reactors, Process Tanks, Clarifiers, Settling Tanks, Waste Water Separators, Tanks, ... 

LPG, Tank Truck Loading 
LPG, Treating 

Including, but not limited to, all or part of the following: Absorbers, Accumulators, Columns, Compressors, Condensers, Drums, Fractionators, Heat Exchangers, Knock Out Pots, Pots, Pumps, Reactors, Regenerators, Scrubbers, Settling Tanks, Sumps, Tanks, Towers, Vessels, ... 

LPG Distillation Unit 

Including, but not limited to, all or part of the following: Absorbers, Accumulators, Columns, Compressors, Condensers, Drums, Fractionators, Heat Exchangers, Knock Out Pots, Pots, Pumps, Reactors, Regenerators, Scrubbers, Settling Tanks, Sumps, Tanks, Towers, Vessels, ... 

Lube Oil Additive/Lubricant Mfg. 
Lube Oil Re-refining 

Including, but not limited to, all or part of the following: Absorbers, Accumulators, Columns, Compressors, Condensers, Drums, Fractionators, Heat Exchangers, Knock Out Pots, Pots, Pumps, Reactors, Regenerators, Scrubbers, Settling Tanks, Sumps, Tanks, Towers, Vessels, ... 

D
 
Equipment/Process  Schedule 
Marine Bulk Loading/Unloading Sys. 

Including, but not limited to, all or part of the following: Bins, Conveyors, Bucket Elevators, Hoppers, Loading & Unloading Arms, Weigh Stations, ... 

Marine Vessel Displaced Vapor Control 

Including, but not limited to, all or part of the following: Absorbers, Compressors, Condensers, Knock Out Pots, Pumps, Reactors, Saturators, ... 

Merichem Unit 

Including, but not limited to, all or part of the following: Absorbers, Accumulators, Columns, Compressors, Condensers, Drums, Fractionators, Heat Exchangers, Knock Out Pots, Pots, Pumps, Reactors, Regenerators, Scrubbers, Settling Tanks, Sumps, Tanks, Towers, Vessels, ... 

Merox Treating Unit 

Including, but not limited to, all or part of the following: Absorbers, Accumulators, Columns, Compressors, Condensers, Drums, Fractionators, Heat Exchangers, Knock Out Pots, Pots, Pumps, Reactors, Regenerators, Scrubbers, Settling Tanks, Sumps, Tanks, Towers, Vessels, ... 

Metallic Mineral Production 

Including, but not limited to, all or part of the following: Bins, Bucket Elevators, Conveyors, Feeders, Hoppers, Crushers, Cyclones, Log Washers, Mixers, Screens, Vibrating Grizzlies, Weigh Stations, ... 

Misc. Solvent Usage at a Premise 
MTBE Production Facility 

Including, but not limited to, all or part of the following: Absorbers, Accumulators, Columns, Compressors, Condensers, Coolers, Drums, Ejectors, Heat Exchangers, Knock Out Pots, Mixers, Pots, Pumps, Reactors, Regenerators, Scrubbers, Settling Tanks, Sumps, Tanks, Towers, Vessels, ... 

Natural Gas Odorizers  C
 
Equipment/Process  Schedule 
Natural Gas Dehydration 

Including, but not limited to, all or part of the following: Absorbers, Accumulators, Columns, Compressors, Condensers, Drums, Heat Exchangers, Knock Out Pots, Pots, Pumps, Reactors, Regenerators, Scrubbers, Settling Tanks, Sumps, Tanks, Towers, Vessels, ... 

Natural Gas Stabilization Unit 

Including, but not limited to, all or part of the following: Absorbers, Accumulators, Columns, Compressors, Condensers, Drums, Heat Exchangers, Knock Out Pots, Pots, Pumps, Reactors, Scrubbers, Regenerators, Settling Tanks, Sumps, Tanks, Towers, Vessels, ... 

Nut Roasters 

Including, but not limited to, all or part of the following: Bins, Conveyors, Bucket Elevators, Hoppers, Roasters, Coolers, ... 

Nut Shell Drying 

Including, but not limited to, all or part of the following: Bins, Conveyors, Bucket Elevators, Hoppers, Dryers, Coolers, ... 

Oil Heating & Circulating System 

Including, but not limited to, all or part of the following: Heat Exchangers, Pumps, Tanks, ... 

Oil/Water Separator (< 10,000 GPD) 

Including, but not limited to, all or part of the following: Oil Water Separators, Pits, Sumps, Tanks, Vessels, ... 

Oil/Water Separator (>= 10,000 GPD) 

Including, but not limited to, all or part of the following: Oil Water Separators, Pits, Sumps, Tanks, Vessels, ... 

Open-Air resin operations  A 
Oven Bakery 
Oven, Curing (Rule 1401 toxics) 
Oven, Other 
Packaging, Other 
Paint Stripping, Molten Caustic 
Paper Conveying 
Paper Pulp Products 
Paper Size Reduction 
Pavement Grinder 
Pavement Heater  B
 
Equipment/Process  Schedule 
Pelletizing, Chlorine Compounds 

Including, but not limited to, all or part of the following: Conveyors, Bins, Hoppers, Pelletizers, Mixers, Dryers, ... 

Perlite Furnace 
Perlite Handling 

Including, but not limited to, all or part of the following: Conveyors, Bins, Hoppers, Bucket Elevators, ... 

Pesticide/Herbicide Mfg. 

Including, but not limited to, all or part of the following: Absorbers, Accumulators, Columns, Compressors, Condensers, Coolers, Drums, Ejectors, Heat Exchangers, Knock Out Pots, Mixers, Pots, Pumps, Reactors, Regenerators, Scrubbers, Settling Tanks, Sumps, Tanks, Towers, Vessels, ... 

Petroleum Coke Calcining 

Including, but not limited to, all or part of the following: Bins, Conveyors, Reactors, Mixers, Process Tanks, Kilns,... 

Petroleum Coke Conveying 

Including, but not limited to, all or part of the following: Conveyors, Bins, Hoppers, Bucket Elevators, ... 

Pharmaceutical Mfg. 

Including, but not limited to, all or part of the following: Conveyors, Bins, Hoppers, Reactors, Process Tanks, Pelletizers, Mixers, Dryers, ... 

Pipe Coating, Asphaltic 
Plasma Arc Cutting 
Plastic Mfg., Blow Molding Machine 
Plastic/Resin Size Reduction 

Including, but not limited to, all or part of the following: Bins, Bucket Elevators, Conveyors, Feeders, Hoppers, Grinders, Mills, Cyclones, Screens, Weigh Stations, ... 

Plastic/Resins Reforming 
Plastic/Resins Treating 
Plastisol Curing Equipment  B
 
Equipment/Process  Schedule 
Polystyrene Expansion/Molding 
Polystyrene Expansion/Packaging 
Polystyrene Extruding/Expanding 
Polyurethane Foam Mfg. 

Including, but not limited to, all or part of the following: Coolers, Heat Exchangers, Pumps, Reactors, Mixers, Process Tanks, ... 

Polyurethane Mfg/Production 
Polyurethane Mfg/Rebonding 
Process Line, Chrome Plating (Hexavalent) 
Process Line, Chrome Plating (Trivalent) 
Precious Metal, Recovery, Other 
Precious Metal, Recovery, Catalyst 
Printing Press, Air Dry 
Printing Press With IR or UV Over 
Printing Press, Other 
Printing Press, Screen 
Production, Other 
Railroad Car Loading/Unloading,Other 
Railroad Car Unloading, liquid direct to trucks 
Reaction, Other 
Recovery, Other 
Refined Oil/Water Separator 

Including, but not limited to, all or part of the following: Oil/Water Separators, Pits, Sumps, Tanks, Vessels, ... 

Refrigerant Recovery/Recycling  A1 
Rendering Equipment, Blood Drying 
Rendering Equipment, Fishmeal Drying 
Rendering Equipment, Rendering 
Rendering Equipment, Separation, Liquid 
Rendering Product, Handling 

Including, but not limited to, all or part of the following: Conveyors, Bins, Hoppers, Bucket Elevators, ... 

Resin, Varnish Mfg. 

Including, but not limited to, all or part of the following: Coolers, Heat Exchangers, Pumps, Reactors, Mixers, Process Tanks, ... 

Roller Coater  B
 
Equipment/Process  Schedule 
Rubber Mfg. 

Including, but not limited to, all or part of the following: Coolers, Heat Exchangers, Pumps, Reactors, Mixers, Process Tanks, ... 

Rubber Roll Mill 
Sand Handling Equipment, Foundry 

Including, but not limited to, all or part of the following: Conveyors, Bins, Hoppers, Bucket Elevators, ... 

Sand Handling Equipment w/Shakeout, Foundry 

Including, but not limited to, all or part of the following: Conveyors, Bins, Hoppers, Bucket Elevators, ... 

Screening, Green Waste 
Screening, Other 

Including, but not limited to, all or part of the following: Screens, Conveyors, Bins, Hoppers, Bucket Elevators, ... 

Semiconductor, Int. Circuit Mfg (<5 pieces) 
Semiconductor, Int. Circuit Mfg (5 or more) 
Semiconductor, Photo resist (<5 pieces) 
Semiconductor, Photo resist (5 or more pieces) 
Semiconductor, Solvent Cleaning (<5 pieces) 
Semiconductor, Solvent Cleaning (5 or more pieces) 
Sewage Sludge Composting 
Sewage Sludge Drying, Conveying, Storage, Load-out 

Including, but not limited to, all or part of the following: Conveyors, Bins, Hoppers, Bucket Elevators, Loading Arms, ... 

Sewage Sludge Digestion 
Sewage Sludge Dryer 
Sewage Sludge Incineration 
Sewage Treatment, (> 5 MGD), Aerobic 

Including, but not limited to, all or part of the following: Air Floatation Units, Floatation Units, Filter Presses, Clarifiers, Settling Tanks, Trickling Filters, Waste Water Separators, Tanks, ... 

F
 
Equipment/Process  Schedule 
Sewage Treatment, (<=5 MGD) 

Including, but not limited to, all or part of the following: Air Floatation Units, Floatation Units, Filter Presses, Clarifiers, Settling Tanks, Trickling Filters, Waste Water Separators, Tanks, ... 

Sewage Treatment, (> 5 MGD), Anaerobic 

Including, but not limited to, all or part of the following: Air Floatation Units, Floatation Units, Digesters, Filter Presses, Clarifiers, Settling Tanks, Trickling Filters, Waste Water Separators, Tanks, ... 

Sheet Machine 
Shell Blasting System 
Shipping Container System 
Sintering 
Size Reduction, Other 

Including, but not limited to, all or part of the following: Bins, Bucket Elevators, Conveyors, Dryers, Feeders, Hoppers, Crushers, Cyclones, Mixers, Screens, Weigh Stations, ... 

Size Reduction, Petroleum Coke 

Including, but not limited to, all or part of the following: Bins, Bucket Elevators, Conveyors, Dryers, Feeders, Hoppers, Crushers, Cyclones, Mixers, Screens, Weigh Stations, ... 

Sludge Dewatering, Other 

Including, but not limited to, all or part of the following: Filter Press, Process Tanks, Settling Tanks, ... 

Sludge Dryer, Other 
Sludge Incinerator 
Smoke Generator 
Smokehouse 
Soap/Detergent Mfg 

Including, but not limited to, all or part of the following: Process Tanks, Mixers, Tanks, Conveyors, Bins, Hoppers, Bucket Elevators, ... 

Soil Treatment, Other 

Including, but not limited to, all or part of the following: Bins, Conveyors, Ovens, ... 

Soil Treatment, Vapor Extraction 

Including, but not limited to, all or part of the following: Adsorbers, Afterburners, ... 

Solder Leveling  B
 
Equipment/Process  Schedule 
Soldering Machine 
Solvent Reclaim, Still (Multistage) 
Solvent Reclaim, Still (Single stage) 
Solvent Redistillation Unit 

Including, but not limited to, all or part of the following: Absorbers, Accumulators, Columns, Compressors, Condensers, Drums, Heat Exchangers, Knock Out Pots, Pots, Pumps, Reactors, Regenerators, Scrubbers, Settling Tanks, Sumps, Tanks, Towers, Vessels, ... 

Spent Stretford Solution Regeneration 

Including, but not limited to, all or part of the following: Absorbers, Accumulators, Columns, Compressors, Condensers, Drums, Heat Exchangers, Knock Out Pots, Pots, Pumps, Reactors, Regenerators, Scrubbers, Settling Tanks, Sumps, Tanks, Towers, Vessels, ... 

Spray Equipment, Open 
Spray Machine, Adhesive 
Spray Machine, Coating 
Spray Machine, Powder Coating 
Spraying, Resin/Gel Coat 
Sterilization Equipment 
Stereolithography 
Storage, Petroleum Coke 
Storage Container, Baker-Type 
Storage Container, Baker-Type w/Control 
Storage Silo, Other Dry Material 
Storage Tank, w/o Control, Crude Oil/Petroleum Products 
Storage Tank, Acid with sparger 
Storage Tank, Ammonia with sparger 
Storage Tank, Asphalt <=50,000 gallons 
Storage Tank, Asphalt >50,000 gallons 
Storage Tank, Fixed Roof with Internal Floater 
Storage Tank, Fixed Roof with Vapor Control 
Storage Tank, Fuel Oil 
Storage Tank, Lead Compounds 
Storage Tank, LPG  A
 
Equipment/Process  Schedule 
Storage Tank, LPG w/Vaporizing System 
Storage Tank, Other 
Storage Tank, Other w/ Control Equipment 
Storage Tank, with Passive Carbon s.s. 
Storage Tank, with Passive Carbon m.s. 
Storage Tank, with Passive Carbon t.s. 
Storage Tank, Rendered Products 
Storage Tank, Waste Oil 
Storage Tank with condenser 
Storage Tank, with External Floating Roof 
Stove-Oil Filter/Coalescer Facility 
Striper, Can 
Striper, Pavement 
Stripping, Other 
Sulfonation 

Including, but not limited to, all or part of the following: Absorbers, Accumulators, Columns, Compressors, Condensers, Drums, Heat Exchangers, Knock Out Pots, Pots, Pumps, Reactors, Regenerators, Scrubbers, Settling Tanks, Sumps, Tanks, Towers, Vessels, ... 

Sulfuric Acid Plant 

Including, but not limited to, all or part of the following: Accumulators, Columns, Condensers, Drums, Heat Exchangers, Knock Out Pots, Pots, Pumps, Regenerators, Scrubbers, Settling Tanks, Sumps, Tanks, Towers, Vessels, ... 

Sump, Spill Containment 
Sump, Covered & Controlled 
Tablet Coating Pans 
Tank, Chemical Milling 
Tank, Chrome Plating Hexavalent 
Tank, Cadmium Plating Line  B1 
Tank, Chromic Acid Anodizing 
Tank, Degassing Unit 
Tank, Lead Stripping 
Tanks, Nickel Plating Line  B1 
Tank, Nitric Acid 
Tank, Plating (other)  B
 
Equipment/Process  Schedule 
Tank, Rule 1401 toxics 
Tank, Emitting >1 lb/day PM10 
Tank, Other, Hexavalent Chrome 
Tank, Other, Aqueous Solution 
Tank, Stripping w/Methylene Chloride 
Textiles, Recycled, Processing 
Thermal Cracking Unit 

Including, but not limited to, all or part of the following: Absorbers, Accumulators, Columns, Compressors, Condensers, Drums, Fractionators, Heat Exchangers, Knock Out Pots, Pots, Pumps, Reactors, Regenerators, Scrubbers, Settling Tanks, Sumps, Tanks, Towers, Vessels, ... 

Tire Buffer 
Treating, Other 
Treating, Petroleum Distillates 

Including, but not limited to, all or part of the following: Absorbers, Accumulators, Columns, Compressors, Condensers, Drums, Fractionators, Heat Exchangers, Knock Out Pots, Pots, Pumps, Reactors, Regenerators, Scrubbers, Settling Tanks, Sumps, Tanks, Towers, Vessels, ... 

Vacuum Distillation Unit 

Including, but not limited to, all or part of the following: Absorbers, Accumulators, Columns, Compressors, Condensers, Drums, Fractionators, Heat Exchangers, Knock Out Pots, Pots, Pumps, Reactors, Regenerators, Scrubbers, Settling Tanks, Sumps, Tanks, Towers, Vessels, ... 

Vacuum Machine 
Vacuum Metalizing 
Vacuum Pumps 
Vegetable Oil Extractor 

Including, but not limited to, all or part of the following: Bins, Conveyors, Cookers, Presses, Tanks, Kilns, ... 

E
 
Equipment/Process  Schedule 
Warming Device, Electric 
Waste Water Treating (< 10,000 gpd) 

Including, but not limited to, all or part of the following: Air Floatation Units, Floatation Units, Filter Presses, Clarifiers, Settling Tanks, Waste Water Separators, Tanks, ... 

Waste Water Treating ( >= 10,000 to <20,000 gpd) 

Including, but not limited to, all or part of the following: Air Floatation Units, Floatation Units, Filter Presses, Clarifiers, Settling Tanks, Waste Water Separators, Tanks, ... 

Waste Water Treating (< 20,000 gpd) no toxics 

Including, but not limited to, all or part of the following: Air Floatation Units, Floatation Units, Filter Presses, Clarifiers, Settling Tanks, Waste Water Separators, Tanks, ... 

Waste Water Treating (>= 20,000 to < 50,000 gpd) 

Including, but not limited to, all or part of the following: Air Floatation Units, Floatation Units, Filter Presses, Clarifiers, Settling Tanks, Waste Water Separators, Tanks, ... 

Waste Water Treating (>= 50,000 gpd) 

Including, but not limited to, all or part of the following: Air Floatation Units, Floatation Units, Filter Presses, Clarifiers, Settling Tanks, Waste Water Separators, Tanks, ... 

Waste-to-Energy Equipment 
Weigh Station 
Wood Treating Equipment 

Including, but not limited to, all or part of the following: Coater Operations, Process Tanks,... 

A
 
TABLE II
SPECIAL PROCESSING FEES
Schedule  Air Quality Analysis/Health Risk Assessment  Significant Project 

Review 

$2,808.00  $468.20 
$2,808.00  $468.20 
$2,808.00  $935.50 
$2,808.00  $935.50 
$2,808.00  $935.50 
$2,808.00  $935.50 
$2,808.00  $935.50 
$3,744.70  $1,872.30
 
Certification Review
CEMS and FSMS Review1  Basic Fee2  Maximum Fee 
Any combination of pollutants, diluent, flow, or other parameter3 for: 
One to two components  $1,929.10  $3,453.90 
Three to four components  $2,555.00  $6,132.00 
For each additional component beyond four, the following amount is added to the fee for four components  $0  $1,570.00 
For time-sharing of CEMS, the following amount is added to any fee determined above  $0  $1,570.00 
ACEMS Review  Basic Fee4  Maximum Fee 
$1,929.10  $6,132.00 
1The certification fee includes the initial application approval, approval of test protocol, and approval of the performance test results. An application resubmitted after a denial will be treated as a new application and will be subject to a new fee. 

2Covers up to 40 hours evaluation time for the first two components, 60 hours for the first four components, and up to an additional 12 hours for each component beyond four. Excess hours beyond these will be charged at $78.60 per hour, to the maximum listed in the table. 

3Additional components, as necessary, to meet monitoring requirements (e.g., moisture monitor). 

4Covers up to 40 hours evaluation time. 

TABLE III
EMISSION FEES
Annual Emissions 

(tons/yr) 

Organic Gases* 

($/ton) 

Specific Organics** 

($/ton) 

Nitrogen Oxides 

($/ton) 

Sulfur Oxides 

($/ton) 

Carbon Monoxide 

($/ton) 

Particulate Matter*** 

($/tons) 

4 - 25  $287.10  $51.40  $168.00  $199.20  $219.60 
>25 - 75  $466.10  $81.40  $266.80  $321.90  $355.70 
>75  $697.70  $122.10  $401.80  $483.30  $532.60 
> 100  $3.50 
* Excluding Ozone Depleters, Organic Toxics, and Specific Organic Gases.

See Table IV and paragraph (b)(23).

** See Specific Organic Gases paragraph (b)(23).

*** Excluding Particulate Toxic Air Contaminants, See Table IV.

TABLE IV
TOXIC AIR CONTAMINANTS AND OZONE DEPLETERS
TOXIC COMPOUNDS  Fee $/1 lb 
(FY 97-98) 
Fee $/1 lb 
(FY 98-99) 
Fee $/1 lb 
(FY 99-00) 
Asbestos *  $3.00  $3.00  $3.00 
Benzene  $1.00  $1.00  $1.00 
Cadmium *  $3.00  $3.00  $3.00 
Carbon tetrachloride  $1.00  $1.00  $1.00 
Chlorinated dioxins and dibenzofurans (15 species)  $5.00  $5.00  $5.00 
Ethylene dibromide  $1.00  $1.00  $1.00 
Ethylene dichloride  $1.00  $1.00  $1.00 
Ethylene oxide  $1.00  $1.00  $1.00 
Formaldehyde  $0.21  $0.21  $0.21 
Hexavalent chromium *  $4.00  $4.00  $4.00 
Methylene chloride  $0.05  $0.05  $0.05 
Nickel *  $2.00  $2.00  $2.00 
Perchloroethylene  $0.21  $0. 21  $0.25
1,3-Butadiene  $3.00  $3.00  $3.00 
Inorganic arsenic  $3.00  $3.00  $3.00 
Beryllium *  $3.00  $3.00  $3.00 
Polynuclear aromatic hydrocarbons (PAHs)  $3.00  $3.00  $3.00 
Vinyl chloride  $1.00  $1.00  $1.00 
Lead *  $1.00  $1.00  $1.00 
1,4-Dioxane  $0.21  $0.21  $0.21 
Trichloroethylene  $0.10  $0.10  $0.10 
OZONE DEPLETERS  Fee $/1 lb  Fee $/1 lb  Fee $/1 lb 
Chlorofluorocarbons (CFCs)  $0.18  $0.18  $0.18 
1,1,1-trichloroethane  $0.04  $0.04  $0.04
 

* Particulate Toxic Air Contaminants

TABLE V
ANNUAL CLEAN FUELS FEES
Volatile Organic Compounds  
($/ton) 
Nitrogen Oxides 
($/ton) 
Sulfur Oxides 
($/ton) 
Particulate Matter 
($/ton) 
$24.12  $13.60  $16.80  $13.60
 
TABLE VI
ASBESTOS AND LEAD FEES
Demolition  Revision  Cancellation  Procedure 4 or 5 Plans 
$26.20  $10.40  $0  $288.30 
Renovation and Abatement 
100 to 1,000 

square feet 

>1,000 to 5,000 

square feet 

>5,000 to 10,000 

square feet 

>10,000 

square feet 

$10.40  $78.60  $183.50  $288.30