SISAPCD RULE 4.12 NEW SOURCE PERFORMANCE STANDARDS          
LAST REVISED 01/01/89          
          
          *컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴*
          RULE 4.12  New Source Performance Standards
          *컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴*

          A. Incorporation of Federal Standards
             The  provisions of Part 60, Chapter I, Title 40 of the Code of
             Federal  Regulations  (40 CFR Part 60), which are in effect on
             July 1, 1987, are incorporated herein as part of the Rules and
             Regulations  of  the Siskiyou  County  Air  Pollution  Control
             District.

          B. Applicability
             All new stationary  sources of air pollution, and all modified
             or reconstructed stationary  sources  of  air  pollution shall
             comply  with  the  standards,  criteria, and requirements  set
             forth herein. Whenever any source  is subject to more than one
             rule,  regulation, provision or requirement  relating  to  the
             control  of  any air contaminant, the most stringent provision
             shall apply.

          C. "Administrator" means "Control Officer"
             For the purpose of this Rule, the word "Administrator" as used
             in 40 CFR Part  60  shall  mean  the  Control  Officer  of the
             District,   except  where  the  reference  to  "Administrator"
             relates to approval of alternate or equivalent test methods or
             alternative work practices.

          D.List of Incorporated CFR Provisions
             The following  table lists all 40 CFR Part 60 provisions which
             are incorporated  in  their  entirety  as  part  of this Rule.
             Notations  in  this  list  indicate  deviations  from the  EPA
             promulgated provision found in the CFR which have been adopted
             by the District Board for inclusion in this Rule.

            CFR Subpart Title

            Subpart A   General Provisions.

            Subpart C   Emission Guidelines and Compliance Times.

            Subpart D    Standards  of  Performance  for  Fossil Fuel-Fired
                         Steam  Generators for which Construction  is  Com-
                         menced after August 17, 1971.

             Subpart Da  Standards  of  Performance  for  Electric  Utility
                         Steam  Generating Units for which Construction  is
                         Commenced after September 18, 1978.
                 NOTE:   The 30-day  emissions  averaging periods specified
                         in the federal standard  are replaced with 24-hour
                         emissions averaging periods  for  affected facili-
                         ties in the District.  CFR Subpart  Title  Subpart
                         Db  Standards  of  Performance for Industrial Com-
                         mercial Institutional Steam Generating Units.

            Subpart E   Standards of Performance for Incinerators.

            Subpart F   Standards  of  Performance   for   Portland  Cement
                        Plants.

            Subpart G   Standard of Performance for Nitric Acid Plants.

            Subpart H   Standard of Performance for Sulfuric Acid Plants.

            Subpart I   Standards  of  Performance  for  Hot  Mix   Asphalt
                        Facilities.

             Subpart J  Standards of Performance for Petroleum Refineries.

             Subpart K  Standards  of Performance for Storage Vessels  for
                         Petroleum Liquids  Constructed after June 11, 1973
                         and Prior to May 19, 1978.
            Subpart Ka   Standards of Performance  for  Storage Vessels for
                         Petroleum Liquids Constructed after May 18, 1978.

            Subpart Kb   Standards   of  Performance  for  Organic   Liquid
                         Storage Vessels  for  which  Construction,  Recon-
                         struction or Modification Commenced after July 23,
                         1984.

            Subpart L    Standards   of   Performance  for  Secondary  Lead
                         Smelters.

            Subpart M    Standards of Performance  for  Secondary Brass and
                         Bronze Production Plants.

            Subpart N    Standards  of  Performance  for Primary  Emissions
                         from  Basic  Oxygen  Process  Furnaces  for  which
                         Construction is Commenced after June 11, 1973.

            Subpart Na   Standards  of Performance for Secondary  Emissions
                         from Basic Oxygen  Process  Steelmaking Facilities
                         for which Construction is Commenced  after January
                         20, 1983.

            Subpart O    Standards  of  Performance  for  Sewage  Treatment
                         Plants.

            Subpart P    Standards   of   Performance  for  Primary  Copper
                         Smelters.

            Subpart Q    Standards of Performance  for  Primary Zinc Smelt-
                         ers.

            Subpart R    Standards of Performance for Primary  Lead  Smelt-
                         ers.

            Subpart S    Standards  of  Performance  for  Primary  Aluminum
                         Reduction Plants.

            Subpart T    Standards  of  Performance for the Phosphate  Fer-
                         tilizer  Industry:   Wet-Process  Phosphoric  Acid
                         Plants.

            Subpart U    Standards of Performance  for  the  Phosphate Fer-
                         tilizer Industry: Superphosphoric Acid Plants.

            Subpart V    Standards  of  Performance for the Phosphate  Fer-
                         tilizer Industry: Diammonium Phosphate Plants.

            Subpart W    Standards of Performance  for  the  Phosphate Fer-
                         tilizer Industry: Triple Superphosphate Plants.

            Subpart X    Standards  of  Performance for the Phosphate  Fer-
                         tilizer Industry:  Granular  Triple Superphosphate
                         Storage Facilities.

            Subpart Y    Standards  of  Performance  for  Coal  Preparation
                         Plants.

            Subpart Z    Standards of Performance for Ferroalloy Production
                         Facilities.

            Subpart AA   Standards of Performance for Steel  Plants:  Elec-
                         tric  Arc  Furnaces  Constructed after October 21,
                         1974, and on or before August 17, 1983.

            Subpart AAA  Standards of Performance  for  Steel Plants: Elec-
                         tric Arc Furnaces and Argon-Oxygen Decarburization
                         Vessels Constructed after August 17, 1983.

            Subpart BB   Standards of Performance for Kraft Pulp Mills.

            Subpart CC   Standards  of Performance for Glass  Manufacturing
                         Plants.
                 NOTE:   Section 60.292(e)  in the federal standard al lows
                         routine maintenance  to be exempt from particulate
                         matter standards--this exemption is deleted.

            Subpart DD   Standards of Performance for Grain Elevators.

            Subpart EE   Standards of Performance  or  Surface  Coating  of
                         Metal Furniture.
                 NOTE:   The  30-day  emissions averaging periods specified
                         in the federal standard are re placed with 24-hour
                         emissions   averaging    periods    for   affected
                         facilities in the District.

            Subpart GG   Standards   of  Performance  for  Stationary   Gas
                         Turbines.

            Subpart HH   Standards of  Performance  for  Lime Manufacturing
                         Plants.

            Subpart KK   Standards  of  Performance  for Lead-Acid  Battery
                         Manufacturing Plants.

            Subpart LL   Standards  of  Performance  for  Metallic  Mineral
                         Processing Plants.

            Subpart MM   Standards of Performance for  Automobile and Light
                         Duty Truck Surface Coating Operations.
                 NOTE:   The 30-day emissions averaging  periods  specified
                         in the federal standard are re placed with 24-hour
                         emissions    averaging    periods   for   affected
                         facilities in the District.

            Subpart NN   Standards  of  Performance  for   Phosphate   Rock
                         Plants.

            Subpart PP   Standards  of  Performance  for  Ammonium  Sulfate
                         Manufacture.

            Subpart QQ   Standards  of  Performance  for  the  Graphic Arts
                         Industry: Publication Rotogravure Printing.
                 NOTE:   The  30-day emissions averaging periods  specified
                         in the  federal standard are replaced with 24-hour
                         emissions  averaging  periods for affected facili-
                         ties in the District.

            Subpart RR   Standards of Performance  for  Pressure  Sensitive
                         Tape and Label Surface Coating Operations.
                 NOTE:   The  30-day  emissions averaging periods specified
                         in the federal  standard are replaced with 24-hour
                         emissions averaging  periods  for affected facili-
                         ties in the District.

            Subpart SS   Standards  of  Performance for Industrial  Surface
                         Coating: Large Appliances.
                 NOTE:   The 30-day emissions  averaging  periods specified
                         in the federal standard are replaced  with 24-hour
                         emissions  averaging periods for affected  facili-
                         ties in the District.

            Subpart TT   Standards of  Performance  for  Metal Coil Surface
                         Coating.
                 NOTE:   The  30-day emissions averaging periods  specified
                         in the  federal standard are replaced with 24-hour
                         emissions  averaging  periods for affected facili-
                         ties in the District.

            Subpart UU   Standards of Performance  for  Asphalt  Processing
                         and Asphalt Roofing Manufacture.

            Subpart VV   Standards  of  Performance for Equipment Leaks  of
                         VOC in the Synthetic  Organic  Chemicals  Manufac-
                         turing Industry.
                 NOTE:   The  observation of a leak in excess of the  stan-
                         dard constitutes  a  violation  of this rule. This
                         provision is added to Section 60.592.1.

            Subpart WW   Standards  of  Performance  for the  Beverage  Can
                         Surface Coating Industry.
                 NOTE:   The 30-day emissions averaging  periods  specified
                         in the federal standard are replaced with  24-hour
                         emissions  averaging  periods for affected facili-
                         ties in the District.

            Subpart XX   Standards of Performance  for Bulk Gasoline Termi-
                         nals.
                 NOTE:   California Air Resources Board  (CARB)  Certifica-
                         tion   and  Test  Procedures  for  Vapor  Recovery
                         Systems   of  Gasoline  Delivery  Tanks  shall  be
                         followed in lieu of the federal procedure as shown
                         in  the  CFR.   Documentation   and  recordkeeping
                         requirements shall record results  of CARB Certif-
                         ication tests.

            Subpart AAA  Standards of performance for New Residential  Wood
                         Heaters.

            Subpart BBB  Standards  of  Performance  for  the  Rubber  Tire
                         Manufacturing Industry.

            Subpart FFF  Standards  of  Performance  for Flexible Vinyl and
                         Urethane Coating and Printing.
                 NOTE:   The 30-day emissions averaging  periods  specified
                         in the federal standard are replaced with  24-hour
                         emissions  averaging  periods for affected facili-
                         ties in the District.   The  monthly basis used to
                         calculate the VOC content from  the source perfor-
                         mance  test  in the federal standard  is  replaced
                         with a 24-hour period to demonstrate compliance on
                         a  daily basis  for  affected  facilities  in  the
                         District.

            Subpart GGG  Standards  of  Performance  for Equipment Leaks of
                         VOC in Petroleum Refineries.
                 NOTE:   The observation of a leak in  excess  of the stan-
                         dard  constitutes  a violation of this rule.  This
                         provision is added to Section 60.592.1.

            Subpart HHH  Standards  of  Performance   for  Synthetic  Fiber
                         Production Facilities.
                 NOTE:   The six-month rolling average  basis  specified in
                         the  federal  standard  is  replaced  with 24-hour
                         emissions  averaging periods for affected  facili-
                         ties in the District.

            Subpart JJJ  Standards of  Performance for Petroleum Dry Clean-
                         ers.
                 NOTE:   The observation  of  a leak in excess of the stan-
                         dard constitutes a violation  of  this  rule. This
                         provision is added to Section 60.592.1.

            Subpart KKK  Standards  of  Performance for Equipment Leaks  of
                         VOC from Onshore Natural Gas Processing Plants.

            Subpart LLL  Standards of Performance  for  Onshore Natural Gas
                         Processing; SO2 Emissions.

            Subpart OOO  Standards  of Performance for Nonmetallic  Mineral
                         Processing Plants.

            Subpart PPP  Standards  of   Performance  for  Wool  Fiberglass
                         Insulation Manufacturing Plants.

            Subpart QQQ  Standards of Performance  for  VOC  Emissions from
                         Petroleum Refinery Waste Water Systems.

            Subpart SSS  Standards of Performance for Magnetic  Tape  Manu-
                         facturing.

            Subpart TTT  Standards  of  Performance  for Industrial Surface
                         Coating; Plastic parts for Business Machines.

            Appendix A   Reference Methods.
            Appendix B   Performance Specifications.

                                      * * * * *