SJUAPCD 4602 MOTOR VEHICLE & MOBILE EQUIPMENT COATING OPERATIONS
LAST REVISED 09/17/97



RULE 4602 MOTOR VEHICLE AND MOBILE EQUIPMENT COATING OPERATIONS (Adopted April 11, 1991; Amended September 19, 1991; Amended December 17, 1992; Amended December 15, 1994; Amended June 15, 1995; Amended September 17, 1997.)

1.0 Purpose

The purpose of this rule is to limit VOC emissions from the finishing and refinishing of Group I Vehicles and Group II Vehicles and Equipment. This rule also specifies the administrative and recordkeeping requirements and the test methods for determining the VOC content and emissions and the quality of coatings.

2.0 Applicability

This Rule is applicable to any person who applies, supplies, sells, offers for sale, or solicits the application of VOC-containing coatings used in the finishing or refinishing of Group I Vehicles and Group II Vehicles and Equipment, and their parts and components as defined in Section 3.0 of this Rule.

3.0 Definitions

4.0 Exemptions

5.0 Requirements

Effective 7/1/91 Effective 1/1/93 Effective 7/1/95
Pretreatment Wash Primer 780 g/l 6.5 lbs/gl 780 g/l 6.5 lbs/gl 780 g/l 6.5 lbs/gl
Precoat 780 6.5 780 6.5 600 5.0
Primer/Primer Surfacer 720 6.0 340 2.8 250 2.1
Primer Sealer 720 6.0 420 3.5 420 3.5
Topcoat 720 6.0 600 5.0 420 3.5
Metallic/Irides. Topcoat 720 6.0 600 5.0 520 4.3
Multi-Stage Topcoat System 540 4.5
Effective 7/1/91 Effective 1/1/93 Effective 7/1/95
Pretreatment Wash Primer 780 g/l 6.5 lbs/gl 780 g/l 6.5 lbs/gl 780 g/l 6.5 lbs/gl
Precoat 780 6.5 780 6.5 600 5.0
Primer/Primer Surfacer 340 2.8 340 2.8 250 2.1
Primer Sealer 340 2.8
Topcoat 420 3.5 420 3.5 420 3.5
Metallic/Irides. Topcoat 650 5.4 420 3.5 420 3.5
Camouflage 420 3.5 420 3.5 420 3.5

.

6.0 Administrative Requirements