SJUAPCD RULE 4604 CAN AND COIL COATING OPERATIONS
LAST REVISED 12/17/92



RULE 4604 - CAN AND COIL COATING OPERATIONS

(Adopted April 11, 1991, Amended September 19, 1991, Amended December 17, 1992)

1.0 Purpose

The purpose of this rule is to limit VOC emission from can and coil coating operations and to provide the administrative requirements for recording and measuring the emissions.

2.0 Applicability

This rule applies to can and coil coating operations and is intended to reduce emissions of VOCs from the coating of metal cans and coils.

3..0 Definitions

4.0 Exemptions

5.0 Requirements

Grams/liter
Sheet basecoat (exterior and interior) and overvarnish 225
Two-piece can exterior basecoat and overvarnish 250
Interior and exterior body spray, interior or exterior end spray or rollcoat 510
Three-piece can side seam spray 660
End Sealing Compound 440



Grams/liter
Prime and topcoat for single coat operation 200


6.0 Administrative Requirements

7.0 Compliance Schedule