SJUAPCD RULE 4602 MOTOR VEHICLE & MOBILE EQUIPMENT COATING OPERATIONS
LAST REVISED 06/15/95



RULE 4602 - MOTOR VEHICLE AND MOBILE EQUIPMENT COATING OPERATIONS

(Adopted April 11, 1991; Amended September 19, 1991; Amended December 17, 1992; Amended December 15, 1994; Amended June 15, 1995.)

1.0 Purpose

The purpose of this rule is to limit VOC emissions from the finishing and refinishing of Group I Vehicles and Group II Vehicles and Equipment. This rule also specifies the administrative and recordkeeping requirements and the test methods for determining the VOC content and emissions and the quality of coatings.

2.0 Applicability

This Rule is applicable to any person who applies, supplies, sells, offers for sale, or solicits the application of coatings used in the finishing or refinishing of Group I Vehicles and Group II Vehicles and Equipment, and their parts and components as defined in Section 3.0 of this Rule.

3.0 Definitions

4.0 Exemptions

5.0 Requirements

Effective 7/1/91 Effective 1/1/93 Effective 7/1/95
Pretreatment Wash Primer

Precoat

Primer/Primer Surfacer

Primer Sealer

Topcoat

Metallic/Iridescent Topcoat

Multi-Stage Topcoat System

780 g/l 6.5 lbs/gal

780 6.5

720 6.0

720 6.0

720 6.0

720 6.0

780 g/l 6.5 lbs/gal

780 6.5

340 2.8

420 3.5

600 5.0

600 5.0

780 g/l 6.5 lbs/gal

600 5.0

250 2.1

420 3.5

420 3.5

520 4.3

540 4.5



Effective 7/1/91 Effective 1/1/93 Effective 7/1/95
Pretreatment Wash Primer

Precoat

Primer/Primer Surfacer

Primer Sealer

Topcoat

Metallic/Iridescent Topcoat

Camouflage

780 g/l 6.5 lbs/gal

780 6.5

340 2.8





420 3.5

650 5.4

420 3.5

780 g/l 6.5 lbs/gal

780 6.5

340 2.8





420 3.5

420 3.5

420 3.5

780 g/l 6.5 lbs/gal

600 5.0

250 2.1

340 2.8

420 3.5

420 3.5

420 3.5



6.0 Administrative Requirements