SLOAPCD RULE 601 NEW SOURCE PERFORMANCE STANDARDS (NSPS)

LAST REVISED 09/04/90





RULE 601. NEW SOURCE PERFORMANCE STANDARDS (NSPS)

(Revised 9-4-90)

A. Incorporation of Federal Standards

The provisions of Part 60, Chapter I, Title 40 of the

Code of Federal Regulations (40 CFR Part 60), which are

in effect on September 4, 1990, are incorporated herein

as part of the Rules and Regulations of the San Luis

Obispo County Air Pollution Control District. Applicable

provisions of 40 CFR Part 60 include those incorporated

in the current bound CFR volume plus any provisions

recently promulgated by EPA, as noticed in the Federal

Register, but not yet incorporated into the bound CFR.

Where there are currently effective provisions which are

not yet included in the bound CFR volume, the Federal

Register notice by which each provision was promulgated

is referenced in the affected subpart of 601.D of this

Rule.

B. Applicability

All new stationary sources of air pollution, and all

modified or reconstructed stationary sources of air

pollution shall comply with the standards, criteria, and

requirements set forth herein. Whenever any source is

subject to more than one rule, regulation, provision or

requirement relating to the control of any air

contaminant, the most stringent provision shall apply.

C. "Administrator" means "APCO"

For the purpose of this Rule, the word "Administrator" as

used in 40 CFR Part 60 shall mean the Air Pollution

Control Officer (APCO) of the District, except where the

reference to "Administrator" relates to approval of

alternate or equivalent test methods or alternative work

practices/standards.

D. List of Incorporated CFR Provisions

The following table lists all 40 CFR Part 60 provisions

which are incorporated in their entirety as part of this

Rule. Federal Register (FR) references are to currently

effective provisions promulgated or revised by EPA, but

not yet incorporated into the currently available CFR

volume. Notations in this list indicate deviations from

the EPA-promulgated provisions found in the CFR which

have been adopted by the District Board for inclusion in

this Rule.

CFR Subpart Title

Subpart A General Provisions

Subpart C Emission Guidelines and Compliance Times

Subpart D Standards of Performance of

Fossil-Fuel-Fired Steam Generators for

which Construction is Commenced after

August 17, 1971

Subpart Da Standards of Performance for Electric

Utility Steam Generating Units for which

Construction is Commenced after

September 18, 1978

NOTE: The 30-day emissions averaging

periods specified in the Federal

Standard are replaced with 24-hour

emissions averaging periods for affected

facilities in the District.

Subpart Db Standards of Performance For

Industrial-Commercial-Institutional

Steam Generating Units

Note: The 30-day emissions averaging

periods specified in the federal

standard are replaced with 24-hour

emissions averaging periods for affected

facilities in the District

Subpart E Standards of Performance for

Incinerators

Subpart F Standards of Performance for Portland

Cement Plants

Subpart G Standards of Performance for Nitric Acid

Plants

Subpart H Standards of Performance for Sulfuric

Acid Plants

Subpart I Standards of Performance for Hot Mix

Asphalt Facilities

Subpart J Standards of Performance for Petroleum

Refineries

Subpart K Standards of Performance for Storage

Vessels for Petroleum Liquids

Constructed after June 11, 1973 and

Prior to May 19, 1978.

Subpart Ka Standards of Performance for Storage

Vessels for Petroleum Liquids

Constructed After May 18, 1978 and prior

to July 23, 1984

Subpart Kb Standards of Performance for Volatile

Organic Liquid Storage Vessels

(Including Petroleum Liquid Storage

Vessels) for Which Construction,

Reconstruction or Modification Commenced

After July 23, 1984

Subpart L Standards of Performance for Secondary

Lead Smelters

Subpart M Standards of Performance for Secondary

Brass and Bronze Production Plants

Subpart N Standards of Performance for Primary

Emissions from Basic Oxygen Process

Furnaces for which Construction is

Commenced after June 11, 1973.

Subpart Na Standards of Performance for Secondary

Emissions from Basic Oxygen Process

Steelmaking Facilities for which

Construction is Commenced after January

20, 1983

Subpart O Standards of Performance for Sewage

Treatment Plants

Subpart P Standards of Performance for Primary

Copper Smelters

Subpart Q Standards of Performance for Primary

Zinc Smelters

Subpart R Standards of Performance for Primary

Lead Smelters

Subpart S Standards of Performance for Primary

Aluminum Reduction Plants

Subpart T Standards of Performance for the

Phosphate Fertilizer Industry:

Wet-Process Phosphoric Acid Plants

Subpart U Standards of Performance for the

Phosphate Fertilizer Industry:

Superphosphoric Acid Plants

Subpart V Standards of Performance for the

Phosphate Fertilizer Industry:

Diammonium Phosphate Plants

Subpart W Standards of Performance for the

Phosphate Fertilizer Industry: Triple

Superphosphate Plants

Subpart X Standards of Performance for the

Phosphate Fertilizer Industry: Granular

Triple Superphosphate Storage Facilities

Subpart Y Standards of Performance for Coal

Preparation Plants

Subpart Z Standards of Performance for Ferroalloy

Production Facilities

Subpart AA Standards of Performance for Steel

Plants: Electric Arc Furnaces

Constructed after October 21, 1974, and

on or before August 17, 1983

Subpart AAa Standards of Performance for Steel

Plants: Electric Arc Furnaces and

Argon-Oxygen Decarburization Vessels

Constructed after August 17, 1983

Subpart BB Standards of Performance for Kraft Pulp

Mills

Subpart CC Standards of Performance for Glass

Manufacturing Plants

Subpart DD Standards of Performance for Grain

Elevators

Subpart EE Standards of Performance for Surface

Coating of Metal Furniture

NOTE: The 30-day emissions averaging

periods specified in the Federal

Standard are replaced with 24-hour

emissions averaging periods for affected

facilities in the District.

Subpart GG Standards of Performance for Stationary

Gas Turbines

Subpart HH Standards of Performance for Lime

Manufacturing Plants

Subpart KK Standards of Performance for Lead-Acid

Battery Manufacturing Plants

Subpart LL Standards of Performance for Metallic

Mineral Processing Plants

Subpart MM Standards of Performance for Automobile

and Light Duty Truck Surface Coating

Operations

NOTE: The 30-day emissions averaging

periods specified in the Federal

Standard are replaced with 24-hour

emissions averaging periods for affected

facilities in the District.

Subpart NN Standards of Performance for Phosphate

Rock Plants

Subpart PP Standards of Performance for Ammonium

Sulfate Manufacture

Subpart QQ Standards of Performance for the Graphic

Arts Industry: Publication Rotogravure

Printing

NOTE: The 30-day emissions averaging

periods specified in the Federal

Standard are replaced with 24-hour

emissions averaging periods for affected

facilities in the District.

Subpart RR Standards of Performance for Pressure

Sensitive Tape and Label Surface Coating

Operations

NOTE: The 30-day emissions averaging

periods specified in the Federal

Standard are replaced with 24-hour

emissions averaging periods for affected

facilities in the District.

Subpart SS Standards of Performance for Industrial

Surface Coating: Large Appliances

NOTE: The 30-day emissions averaging

periods specified in the Federal

Standard are replaced with 24-hour

emissions averaging periods for affected

facilities in the District.

Subpart TT Standards of Performance for Metal Coil

Surface Coating

NOTE: The 30-day emissions averaging

periods specified in the Federal

Standard are replaced with 24-hour

emissions averaging periods for affected

facilities in the District.

Subpart UU Standards of Performance for Asphalt

Processing and Asphalt Roofing

Manufacture

Subpart VV Standards of Performance for Equipment

Leaks of VOC in the Synthetic Organic

Chemicals Manufacturing Industry

Subpart WW Standards of Performance for the

Beverage Can Surface Coating Industry

NOTE: The 30-day emissions averaging

periods specified in the Federal

Standard are replaced with 24-hour

emissions averaging periods for affected

facilities in the District.

Subpart XX Standards of Performance for Bulk

Gasoline Terminals

NOTE: California Air Resources Board

(CARB) Certification and Test Procedures

for Vapor recovery Systems of Gasoline

Delivery Tanks shall be followed in lieu

of the Federal procedure as shown in the

CFR documentation and recordkeeping

requirements shall record results of

CARB Certification Tests.

Subpart AAA Standards of Performance for New

Residential Wood Heaters

Subpart BBB Standards of Performance for the Rubber

Tire Manufacturing Industry

Subpart FFF Standards of Performance for Flexible

Vinyl and Urethane Coating and Printing

NOTE: The 30-day emissions averaging

periods specified in the Federal

Standard are replaced with 24-hour

emissions averaging periods for affected

facilities in the District.

The monthly basis used to calculate the

VOC content from the source performance

test in the Federal Standard is replaced

with a 24-hour period to demonstrate

compliance on a daily basis for affected

facilities in the District.

Subpart GGG Standards of Performance for Equipment

Leaks of VOC in Petroleum Refineries



Subpart HHH Standards of Performance for Synthetic

Fiber Production Facilities

NOTE: The six-month rolling average

basis specified in the Federal Standard

is replaced with 24-hour emission

averaging periods for affected

facilities in the District.

Subpart JJJ Standards of Performance for Petroleum

Dry Cleaners

Subpart KKK Standards of Performance for Equipment

Leaks from Onshore Natural Gas

Processing Plants

Subpart LLL Standards of Performance for Onshore

Natural Gas Processing; SO2 Emissions

Subpart OOO Standards of Performance for Nonmetallic

Mineral Processing Plants

Subpart PPP Standards of Performance for Wool

Fiberglass Insulation Manufacturing

Plants

Subpart QQQ Standards of Performance for VOC

Emissions from Petroleum Refinery

Wastewater Systems

Subpart SSS Standards of Performance for Magnetic

Tape Manufacturing Industry

Subpart TTT Standards of Performance for Industrial

Surface Coatings of Plastic Parts for

Business Machines

Subpart VVV Polymeric Coating of Supporting

Substrate Facilities

Appendix A Reference Methods

Appendix B Performance Specifications

Appendix C Determination of Emission Rate Change

Appendix D Required Emission Inventory Information

Appendix F Quality Assurance Procedures

Appendix I Removable Label and Owners Manual